2 layers100 × 100 mm
Explorer
anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.
266 parts100
2 layers51.5 × 64.7 mm
MuHack SAO 10th
MrMoDDoM/MuHack_SAO_10thRepo for the commemorative MuHack SAO fot the 10th anniversary
- Size
- 51.5 × 64.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 11
- Pads
- 34
- Tracks, vias
- 90, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Aug 2024
- Updated
- 23 Nov 2024
Overview
MuHack SAO 10th is an open-source printed circuit board by MrMoDDoM, from the MrMoDDoM/MuHack_SAO_10th repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 51.5 × 64.7 mm with 21 parts on 11 nets, routed with 90 tracks and 0 vias.
It is built around the AT24CS08-SSHM-T. Its parts include 3 resistors, 2 diodes, 1 IC, 1 switch and 1 crystal.
Main components
1README
README.mdMuHack_SAO_10th
Repo for the commemorative MuHack SAO fot the 10th anniversary
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | LOGO | LOGO | G***, G***, MUHACK_LOGO |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | AT24CS08-SSHM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | B-SolderMask_LOGO | LOGO | B-SolderMask_LOGO |
| 1 | BIT_LOGO | LOGO | BIT_LOGO |
| 1 | Badgelife_sao_connector_v169bis | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | X1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3002_1x2032 | BT1 |
| 1 | EdgeCut | LOGO | EdgeCut |
| 1 | F-Cu | LOGO | F-Cu |
| 1 | F-Mask | LOGO | F-Mask |
| 1 | KeepOut-B-SolderMask_LOGO | LOGO | KeepOut-B-SolderMask_LOGO |
| 1 | SW_DIP_x01 | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | SilkScreen | LOGO | SilkScreen |
| 1 | SolderMask_LOGO | LOGO | SolderMask_LOGO |
The 20 most common of 21 parts.
Similar boards
- 2 layers65 × 40 mm
Scl3300-evb
anyshake/scl3300-d01-evb
🍥 SCL3300-D01 accelerometer EVB with GNSS and EEPROM for testing purpose.
67 parts1 - 2 layers89.5 × 51.2 mm
- 4 layers90 × 61.5 mm
- 4 layers85 × 170 mm
- 2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
Questions
How big is the MuHack SAO 10th PCB?
It measures 51.5 × 64.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MuHack SAO 10th use?
21 parts, built around the AT24CS08-SSHM-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MuHack SAO 10th KiCad files?
From the MrMoDDoM/MuHack_SAO_10th repository on GitHub, at the commit this page was made from: the board is MuHack_SAO_10th.kicad_pcb and its schematic MuHack_SAO_10th.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MuHack SAO 10th design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).