

PMod Hub75
A selection of Random PMod Boards
- Size
- 45 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 38
- Pads
- 104
- Tracks, vias
- 193, 18
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 Apr 2021
- Updated
- 26 Jun 2025
Overview
PMod Hub75 is an open-source printed circuit board by jjhorton, from the jjhorton/PMod repository on GitHub. It is a 2-layer board of 45 × 40 mm with 31 parts on 38 nets, routed with 193 tracks and 18 vias.
Its parts include 4 capacitors, 4 resistors, 3 connectors and 2 ICs.
README
README.mdPMod boards
A selection of Random PMod Boards to be used with FPGA's that use the Digilent PMod standard connection
Board Status
The boards in the table are being checked using github actions Kibot for the KiCAD files and also building the example code for each one online. The fabrication files produced using Gitfub actions also includes a PDF of the schematic and GERBER files for getting PCB's built using JLCPCB.
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 2 | Conn_02x06_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J1, J2 |
| 2 | SN74LVC8T245DWR | jjh:SOIC127P1030X265-24N | IC1, IC2 |
| 1 | Conn_02x08_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J3 |
| 1 | G*** | kibuzzard-61E0776E | kibuzzard-61E0776E |
| 1 | G*** | kibuzzard-61E07521 | kibuzzard-61E07521 |
| 1 | G*** | kibuzzard-61E075D1 | kibuzzard-61E075D1 |
| 1 | G*** | kibuzzard-61E0771A | kibuzzard-61E0771A |
| 1 | G*** | kibuzzard-61E07635 | kibuzzard-61E07635 |
| 1 | G*** | kibuzzard-61E07643 | kibuzzard-61E07643 |
| 1 | G*** | kibuzzard-61E0775A | kibuzzard-61E0775A |
| 1 | G*** | kibuzzard-61E075F2 | kibuzzard-61E075F2 |
| 1 | G*** | kibuzzard-61E077C4 | kibuzzard-61E077C4 |
| 1 | G*** | kibuzzard-61E076D2 | kibuzzard-61E076D2 |
| 1 | G*** | kibuzzard-61E07549 | kibuzzard-61E07549 |
| 1 | G*** | kibuzzard-61E076BC | kibuzzard-61E076BC |
| 1 | G*** | kibuzzard-61E07660 | kibuzzard-61E07660 |
| 1 | G*** | kibuzzard-61E07587 | kibuzzard-61E07587 |
| 1 | G*** | kibuzzard-61E0756E | kibuzzard-61E0756E |
| 1 | G*** | kibuzzard-61E07790 | kibuzzard-61E07790 |
| 1 | LOGO | jjh:Untitled | G*** |
| 1 | LOGO | jjh:j2h_small | G*** |
More from jjhorton/PMod
11- 2 layers90.5 × 26.5 mm

- 2 layers69 × 80 mm

- 4 layers100 × 38 mm

- 2 layers25.5 × 61 mm

- 4 layers40.5 × 17 mm

- 2 layers40 × 17.5 mm

- 2 layers50 × 18 mm

- 2 layers80 × 17 mm

- 2 layers100 × 19.5 mm

- 4 layers29 × 22 mm

- 2 layers47 × 17 mm

Similar boards
- 2 layers44.5 × 46.9 mm

OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
31 parts2.1k - 2 layers65 × 30 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
31 parts1kGPL-3.0 - 2 layers191 × 98.5 mm

MacroKeypad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
31 parts915 - 2 layers39 × 45.2 mm

CH32V003F4P6-R0-1v1
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
31 parts599 - 2 layers26.7 × 27.9 mm

Breakout board
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
31 parts546MIT - 2 layers100 × 50 mm

Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
31 parts447MIT - 2 layers77.2 × 69.8 mm

- 2 layers103 × 55 mm

Questions
How big is the PMod Hub75 PCB?
It measures 45 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PMod Hub75 use?
31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PMod Hub75 KiCad files?
From the jjhorton/PMod repository on GitHub, at the commit this page was made from: the board is PMod_Hub75/Hardware/PMod_Hub75.kicad_pcb and its schematic PMod_7Segment/hardware/PMod_7Segement.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PMod Hub75 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jjhorton before reusing the design.