Skip to the content
2 layers49.8 × 53.1 mmAccessibility module, the printed circuit board in 3D

Repository for the development of the project for the Integration Workshop 3 course.

Size
49.8 × 53.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
34
Pads
59
Tracks, vias
48, 6
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
2 Apr 2025
Updated
12 Jun 2025

Overview

Accessibility module is an open-source printed circuit board by IshikawaRasoto, from the IshikawaRasoto/integration-workshop-3 repository on GitHub. It is a 2-layer board of 49.8 × 53.1 mm with 11 parts on 34 nets, routed with 48 tracks and 6 vias.

It is built around the LM1117T-3.3, SG90 and BC546. Its parts include 2 ICs, 1 resistor, 1 diode, 1 transistor and 1 connector. It belongs with the ESP32 boards of this library.

Main components

3

README

README.md

Melody - Team #6

This repository contains all the development of project Melody for the course of Integration Workshop 3 in UTFPR-CT.

Links 🔗

Members

  • Rafael Rasoto GitHub

  • Nicolas Riuichi Oda GitHub

  • Augusto Rosa GitHub

  • Bruno Zenatti GitHub

  • Fernando Caetano GitHub

  • Rogério Slabiski Melo GitHub

Parts

11
QtyValueFootprintReferences
4SG90Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalM2, M3, M4, M5
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
1270RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1BC546Package_TO_SOT_THT:TO-92_InlineQ1
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ1
1ESP32_DevKit_V1_DOITesp32_devkit_v1_doit:esp32_devkit_v1_doitU1
1LM1117T-3.3Package_TO_SOT_THT:TO-220-3_VerticalU2
1Motor_DCConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalM1

More from IshikawaRasoto/integration-workshop-3

1
  • 2 layers74.4 × 99.6 mmMelody, the printed circuit board in 3D

    Melody

    IshikawaRasoto/integration-workshop-3

    Repository for the development of the project for the Integration Workshop 3 course.

    49 parts1

Similar boards

  • 4 layers102 × 100 mmZelvicka, the printed circuit board in 3D

    Zelvicka

    RoboticsBrno/Robutek

    Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.

    214 parts12
  • 2 layers119.4 × 98.9 mmPCB Pami, the printed circuit board in 3D

    PCB Pami

    FIPATECH/CDFR26_PAMI

    Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique

    25 parts6
  • 2 layers106.4 × 74.7 mmCar pcb, the printed circuit board in 3D

    Car pcb

    MaximTrofimov/STM32-RC-Car

    Designed two custom PCBs (remote and car) for a wirelessly-controlled RC car. Implemented wireless communication between two STM32 microcontrollers using embedded firmware.

    55 parts1MIT
  • 2 layers117.1 × 68.6 mmProyecto exposito, the printed circuit board in 3D

    Proyecto exposito

    misaacastillo/RoboticArm

    “Robotic Arm” es un brazo robotico el cual cuenta con un modelo dummy de menores dimensiones. Este modelo copia tendrá una conexión entre sus potenciómetros y los servomotores ubicados en el modelo principal.

    37 parts1
  • 4 layers50 × 50 mmBoard v1, the printed circuit board in 3D

    Board v1

    ductomn/Swarm-robot

    Bachelor Thesis - Design and implementation of a cooperative robotic platform with simple communication

    79 parts
  • 6 layers100 × 160 mmScopefun v2, the printed circuit board in 3D

    Scopefun v2

    snhobbs/scopefun-hardware

    This repository contains Scopefun hardware schematics and pcb layout files.

    840 parts
  • 2 layers68.6 × 53.3 mmENEL200ShieldGroup01, the printed circuit board in 3D

    ENEL200ShieldGroup01

    TheBroKendrick/Arduino-Turtle-Robot-

    A project made in my First Professional Year of Electrical Engineering. This was made in collaboration with two other people and focussed on the basics of PCB design, 3D modelling, and basic embedded software…

    41 parts

Questions

How big is the Accessibility module PCB?

It measures 49.8 × 53.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Accessibility module use?

11 parts, built around the LM1117T-3.3, SG90 and BC546. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Accessibility module KiCad files?

From the IshikawaRasoto/integration-workshop-3 repository on GitHub, at the commit this page was made from: the board is electronics/accessibility_module/accessibility_module.kicad_pcb and its schematic electronics/accessibility_module/accessibility_module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Accessibility module design in my own project?

Its repository states no licence, so its author keeps all rights: ask IshikawaRasoto before reusing the design.