Skip to the content
12

SG90

LittelfuseExtended

-40℃~+90℃ 0.2mm 1pF 2 2.7mm 2kA 4.5mm 500V 90V 1812 Gas Discharge Tube Arresters (GDT) ROHS

Part id
littelfuse/SG90
Category
Gas Discharge Tube Arresters (GDT)
Package
1812
Pins
2
In stock
1,357 at JLCPCB (C207248)
Used on
10 open-source boards

Overview

The SG90 is a gas Discharge Tube Arrester made by Littelfuse in a 1812 package with 2 pins. -40℃~+90℃ 0.2mm 1pF 2 2.7mm 2kA 4.5mm 500V 90V 1812 Gas Discharge Tube Arresters (GDT) ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:BK32001002-MH, from EasyEDA) and its footprint (Resistor_SMD:R_1812_4532Metric, from KiCad's library), ready for a KiCad board. 1,357 are in stock at JLCPCB (part C207248). 10 open-source boards in 10 repositories on GitHub use it.

Symbol

12
EasyEDA_Cloud:BK32001002-MHFrom EasyEDA

Footprint

12
Resistor_SMD:R_1812_4532MetricFrom KiCad's library

Pinout

2
The pins of the SG90
PinNameType
11Unspecified
22Unspecified

Open-source boards using it

10See all 10
  • 4 layers102 × 100 mmZelvicka, the printed circuit board in 3D

    Zelvicka

    RoboticsBrno/Robutek

    Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.

    214 parts12
  • 2 layers119.4 × 98.9 mmPCB Pami, the printed circuit board in 3D

    PCB Pami

    FIPATECH/CDFR26_PAMI

    Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique

    25 parts6
  • 2 layers106.4 × 74.7 mmCar pcb, the printed circuit board in 3D

    Car pcb

    MaximTrofimov/STM32-RC-Car

    Designed two custom PCBs (remote and car) for a wirelessly-controlled RC car. Implemented wireless communication between two STM32 microcontrollers using embedded firmware.

    55 parts1MIT
  • 2 layers117.1 × 68.6 mmProyecto exposito, the printed circuit board in 3D

    Proyecto exposito

    misaacastillo/RoboticArm

    “Robotic Arm” es un brazo robotico el cual cuenta con un modelo dummy de menores dimensiones. Este modelo copia tendrá una conexión entre sus potenciómetros y los servomotores ubicados en el modelo principal.

    37 parts1
  • 4 layers50 × 50 mmBoard v1, the printed circuit board in 3D

    Board v1

    ductomn/Swarm-robot

    Bachelor Thesis - Design and implementation of a cooperative robotic platform with simple communication

    79 parts
  • 6 layers100 × 160 mmScopefun v2, the printed circuit board in 3D

    Scopefun v2

    snhobbs/scopefun-hardware

    This repository contains Scopefun hardware schematics and pcb layout files.

    840 parts
  • 2 layers68.6 × 53.3 mmENEL200ShieldGroup01, the printed circuit board in 3D

    ENEL200ShieldGroup01

    TheBroKendrick/Arduino-Turtle-Robot-

    A project made in my First Professional Year of Electrical Engineering. This was made in collaboration with two other people and focussed on the basics of PCB design, 3D modelling, and basic embedded software…

    41 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SG90?

Yes. The symbol is EasyEDA_Cloud:BK32001002-MH and the footprint Resistor_SMD:R_1812_4532Metric, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SG90?

1812, with 2 pins. Its footprint is drawn on this page.

Where is the SG90 datasheet?

Littelfuse publishes it: the Datasheet link on this page opens it.

Where can I order the SG90?

JLCPCB lists it as part C207248, with 1,357 in stock; the sellers' links on this page open their listings.

What can replace the SG90?

Parts like it in the library: the 4532-091-LF by Brightking, the SMD4532-075NF by RUILON, the SMD4532-090NF by RUILON and the 4532-301-LF by Brightking. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SG90?

10 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.