
Accessibility module
IshikawaRasoto/integration-workshop-3
Repository for the development of the project for the Integration Workshop 3 course.

Repository for the development of the project for the Integration Workshop 3 course.
Melody is an open-source printed circuit board by IshikawaRasoto, from the IshikawaRasoto/integration-workshop-3 repository on GitHub. It is a 2-layer board of 74.4 × 99.6 mm with 49 parts on 99 nets, routed with 188 tracks and 13 vias.
It is built around the CD4067. Its parts include 32 resistors, 8 connectors, 7 switches and 2 ICs.
This repository contains all the development of project Melody for the course of Integration Workshop 3 in UTFPR-CT.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 270R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 16 | 330R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32 |
| 7 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 4 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5, J6, J7, J8 |
| 2 | CD4067 | Package_DIP:DIP-24_W15.24mm_LongPads | U1, U2 |
| 1 | Conn_01x01_Pin | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Raspberry_Pi_4 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J2 |
| 1 | USB_B | Connector_USB:USB_B_TE_5787834_Vertical | J1 |

IshikawaRasoto/integration-workshop-3
Repository for the development of the project for the Integration Workshop 3 course.

alexdrymonitis/3dPd
Digital modular hardware/software synthesizer project based on Pure Data and Arduino

DangerousPrototypes/BusPirate5-hardware
Bus Pirate Hardware and accessories for v5 and higher

wenkeli/impedance_meter
Electronics to measure the resistance of multi-channel animal electrodes

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.




It measures 74.4 × 99.6 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the CD4067. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the IshikawaRasoto/integration-workshop-3 repository on GitHub, at the commit this page was made from: the board is electronics/melody/melody.kicad_pcb and its schematic electronics/accessibility_module/accessibility_module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask IshikawaRasoto before reusing the design.