4 layers133.1 × 97.6 mm
2 layers68 × 23.4 mm
Line 4.3 Al
hughminhphan/PROJECTSMy projects
- Size
- 68 × 23.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 208
- Nets
- 102
- Pads
- 552
- Tracks, vias
- 877, 0
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Aug 2023
- Updated
- 9 Jan 2025
Overview
Line 4.3 Al is an open-source printed circuit board by hughminhphan, from the hughminhphan/PROJECTS repository on GitHub. It is a 2-layer board of 68 × 23.4 mm with 208 parts on 102 nets, routed with 877 tracks and 0 vias.
It is built around the SC0915, TPSM33625RDNR and LM339, with the JB2835AWT-W-U30GA0000-N0000001 among its other parts. Its parts include 141 resistors, 24 diodes, 8 ICs, 7 capacitors and 4 connectors.
Main components
4
SC0915
Raspberry Pi Pico SMD module (including test points).Raspberry PiUncategorised
TPSM33625RDNR
QFN-11(3.5x4.5)-40℃~+105℃ 1 1.5uA 1V~15V 2.2MHz 2.5A 2mm 3.5mm 3V~36V 4.5mm 88% Over-temperature protection、Over Current Protection、Under Voltage Protection、Automatic fault recovery、Programmable output voltage、Light load efficient mode Step-down type ±1% QFN-11(3.5x4.5) DC-DC Power Modules ROHSTexas InstrumentsDC-DC Power Modules
LM339
SOP-140℃~+70℃ 1.1mA 1.5mV 150ns 2.3nA 2V~32V 32V 57nA DTL、TTL、CMOS Four channels Open Collector SOP-14 Comparators ROHSJSMSEMIComparators
JB2835AWT-W-U30GA0000-N0000001
SMD2835LED Indication - DiscreteCree LED
Parts
208| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | 0R | Resistor_SMD:R_1210_3225Metric | R73, R133, R134, R135, R136, R137, R138, R139, R140, R141, R147, R152, R153, R154, R155, R156 +23 |
| 36 | 10k | digikey-footprints:0805 | R49, R50, R51, R52, R53, R54, R55, R100, R101, R102, R103, R104, R105, R106, R107, R108 +20 |
| 24 | 12R | digikey-footprints:0805 | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +8 |
| 24 | 330R | digikey-footprints:0805 | R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40 +8 |
| 24 | ALS-PT19 | ALS-PT19-315C_L177_TR8:XDCR_ALS-PT19-315C_L177_TR8 | A1, A2, A10, A11, A12, A13, A14, A15, A16, A17, A18, A19, A20, A21, A22, A23 +8 |
| 24 | JB2835AWT-W-U30GA0000-N0000001 | JB2835AWT-W-U30GA0000-N0000001:LED_J2835_CRW | LED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +8 |
| 16 | 0R | Resistor_SMD:R_0603_1608Metric | R110, R111, R112, R113, R114, R115, R116, R117, R118, R119, R120, R121, R122, R123, R127, R128 |
| 6 | LM339 | digikey-footprints:TSSOP-14_W4.4mm | U1, U2, U3, U4, U5, U6 |
| 4 | Solder Pad | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | J1, J2, J3, J4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R150, R151 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 10uF | digikey-footprints:0805 | C2 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | SC0915 | SC0915:MODULE_SC0915 | U7 |
| 1 | TPSM33625RDNR | TPSM33625RDNR:QFN-FCMOD11_RDN_TEX | U8 |
More from hughminhphan/PROJECTS
12- 2 layers
- 2 layers
- 2 layers135 × 95.3 mm
- 4 layers142.5 × 86.6 mm
- 2 layers
- 2 layers
- 2 layers99 × 99 mm
- 2 layers89 × 79 mm
- 2 layers206 × 197.4 mm
- 2 layers169 × 150 mm
- 4 layers100 × 100 mm
Similar boards
- 4 layers103.9 × 73.3 mm
SimpleFOCNano Panel
runger1101001/SimpleFOCNano
A small BLDC driver shield in Arduino Nano form-factor.
510 parts1 - 6 layers230 × 76 mm
Dual converter motherboard V1.0
Rack-Robotics/Powercore-V3
electrical-discharge power supply, open-source
130 parts85 - 2 layers321.5 × 116.7 mm
- 4 layers100 × 100 mm
Rpi pico printer board
jackw01/pi-pico-printer-board
Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico
224 parts42CERN-OHL-W-2.0 - 2 layers31.1 × 66.2 mm
- 2 layers442.7 × 208.3 mm
Europe ergo
Supermagnum/Europe-ergo
A 94 key ergonomic, split keyboard suitable for European countries.
236 parts8GPL-3.0 - 2 layers139 × 139 mm
Screen driver
lambdaBoost/MC6205-graphical-display
graphical display on old neon plasma screen
285 parts7 - 2 layers60 × 60 mm
Questions
How big is the Line 4.3 Al PCB?
It measures 68 × 23.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Line 4.3 Al use?
208 parts, built around the SC0915, TPSM33625RDNR, LM339 and JB2835AWT-W-U30GA0000-N0000001. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Line 4.3 Al KiCad files?
From the hughminhphan/PROJECTS repository on GitHub, at the commit this page was made from: the board is Goku _ Vegeta/4.3/Redundant Line Revisisons/Line 4.3 - Al/Line 4.3 Al.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Line 4.3 Al design in my own project?
Its repository states no licence, so its author keeps all rights: ask hughminhphan before reusing the design.