
Tareknano
heyitsmeyo/ArduinoWifi-custom
A cutsom arduino uno pcb design that supports Wi-Fi and SD card reader

a custom arduino nano pcb desigb
Nano is an open-source printed circuit board by heyitsmeyo, from the heyitsmeyo/arduinonano-pcb- repository on GitHub. It is a 4-layer board of 43.9 × 18.8 mm with 34 parts on 55 nets, routed with 559 tracks and 96 vias.
It is built around the ATMEGA328P-AU, FT232RL and LM1117DT-5.0, with the SS13 among its other parts. Its parts include 11 capacitors, 8 resistors, 5 diodes, 4 connectors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
a custom arduino nano pcb desigb
https://ko-fi.com/heyitsmeyo| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1k | Resistor_SMD:R_0201_0603Metric | R1, R2, R3, R4, R5, R7, R8 |
| 4 | 100nf | Capacitor_SMD:C_0201_0603Metric | C1, C2, C5, C11 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 3 | 1uf | Capacitor_SMD:C_0201_0603Metric | C6, C8, C9 |
| 2 | 22pf | Capacitor_SMD:C_0201_0603Metric | C3, C4 |
| 2 | 4.7uf | Capacitor_SMD:CP_Elec_4x5.8 | C7, C10 |
| 2 | Conn_01x15_Pin | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J3, J4 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric | R6 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J2 |
| 1 | Crystal | Crystal:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm | Oscillator 16 MHz |
| 1 | FT232RL | Package_SO:SSOP-28_3.9x9.9mm_P0.635mm | U1 |
| 1 | Fuse | Resistor_SMD:R_0603_1608Metric | F1 |
| 1 | LM1117DT-5.0 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U3 |
| 1 | SS13 | Diode_SMD:D_SMA | D5 |
| 1 | SW_Push | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |

heyitsmeyo/ArduinoWifi-custom
A cutsom arduino uno pcb design that supports Wi-Fi and SD card reader

joshishreyas320/STM32-Style-Development-Board-with-Micro-USB
Arduino-compatible development board PCB designed in KiCad. Features ATmega328P-M MCU, Micro USB interface, LM1117DT-5V onboard regulator, SMD resonator, dual 15-pin expansion headers, power LED, and reset switch.

michelegiorgio/Arduino_Nano
PCB designed to recreate a Arduino Nano starting from Arduino Nano official schematic


mazduino/stm32f407xxx-mega-layout
STMM32F407xxx Mega Layout. Made For Speeduino and RusEFI Firmware

yabo104/Electric_Door_With_ESP32_S3
This proyeject contains a hardware/firmware development for an electric door controller.

DvidMakesThings/HW_PDNode-600-Pro
The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.

It measures 43.9 × 18.8 mm and has 4 copper layers, 1.6 mm thick.
34 parts, built around the ATMEGA328P-AU, FT232RL, LM1117DT-5.0 and SS13. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the heyitsmeyo/arduinonano-pcb- repository on GitHub, at the commit this page was made from: the board is arduino nano/nano/nano.kicad_pcb and its schematic arduino nano/nano/nano.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask heyitsmeyo before reusing the design.