Skip to the content
1223

LM1117DT-5.0

Texas InstrumentsExtended

0.003%Vout 0℃~+125℃@(Tj) 1 1.3V@(800mA) 10mA 15V 5V 75dB@(120Hz) 800mA Fixed Over Current Protection、Thermal Shutdown Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LM1117DT-5.0
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TO-252
Pins
3
In stock
885 at JLCPCB (C354068)
Used on
30 open-source boards

Overview

The LM1117DT-5.0 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a TO-252 package with 3 pins. 0.003%Vout 0℃~+125℃@(Tj) 1 1.3V@(800mA) 10mA 15V 5V 75dB@(120Hz) 800mA Fixed Over Current Protection、Thermal Shutdown Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:LM1117DT-5.0, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TO-252-3_TabPin2, from KiCad's library), ready for a KiCad board. 885 are in stock at JLCPCB (part C354068). 30 open-source boards in 21 repositories on GitHub use it.

Symbol

1GND2VO3VI
Regulator_Linear:LM1117DT-5.0From KiCad's library

Footprint

1223
Package_TO_SOT_SMD:TO-252-3_TabPin2From KiCad's library

Pinout

3
The pins of the LM1117DT-5.0
PinNameType
1GNDPower in
2VOPower out
3VIPower in

Open-source boards using it

30See all 30
  • 2 layers85.8 × 94.2 mmFault Latch 2, the printed circuit board in 3D

    Fault Latch 2

    LSUTigerRacing/Electronics

    This repository contains all of the KiCad Schematics for the 2026 TigerRacing Formula SAE's Electronics Subsystem.

    123 parts8
  • 2 layers78 × 84 mmLC meter, the printed circuit board in 3D

    LC meter

    schuyler4/LCR_Meter

    An LCR meter design.

    93 parts6MIT
  • 2 layers87.2 × 175.3 mmY6502, the printed circuit board in 3D

    Y6502

    SunnyYoshimitsu/HTC64

    Think Ben Eater's 6502 but modified....a modified BE6592...the Y!6502....

    63 parts5
  • 2 layers100 × 100 mmENRTENADOR ATMEGA1284P, the printed circuit board in 3D

    ENRTENADOR ATMEGA1284P

    iSebass/MicrocontroladoresTeoria-Practicas

    Este repositorio ha sido creado como un recurso de apoyo para el curso de Microcontroladores impartido en la Universidad del Valle. En este espacio colaboraremos con el Dr. en Ingeniería Sergio Arenas y el Ing.

    149 parts1
  • 2 layers53.6 × 53.7 mmPCB power, the printed circuit board in 3D

    PCB power

    ApolLO-CanSat/PCB-power

    pcb that will provide power for our cansat

    26 parts
  • 2 layers30 × 58 mmPCB power-2, the printed circuit board in 3D

    PCB power-2

    ApolLO-CanSat/PCB-power-2

    repo for second version of powering pcb

    23 parts
  • 2 layers87 × 79 mmKonar2, the printed circuit board in 3D

    Konar2

    balamutnypapcio/Wilus_MiniSumo

    56 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM1117DT-5.0?

Yes. The symbol is Regulator_Linear:LM1117DT-5.0 and the footprint Package_TO_SOT_SMD:TO-252-3_TabPin2, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM1117DT-5.0?

TO-252, with 3 pins. Its footprint is drawn on this page.

Where is the LM1117DT-5.0 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM1117DT-5.0?

JLCPCB lists it as part C354068, with 885 in stock; the sellers' links on this page open their listings.

What can replace the LM1117DT-5.0?

Parts like it in the library: the LM1117IDTX-5.0 by Texas Instruments, the AMS1117CD-5.0 by Advanced Monolithic Systems, the LM1117DTX-5.0 by Texas Instruments and the LP38690DTX-5.0 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM1117DT-5.0?

30 boards in 21 repositories on GitHub; the most starred are listed on this page, with their KiCad files.