

FinalProject2
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 48
- Pads
- 150
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Jan 2026
- Updated
- 29 Jan 2026
Overview
FinalProject2 is an open-source printed circuit board by Brady-YinQuen, from the Brady-YinQuen/PCB-Designs repository on GitHub. It is a 2-layer board with 38 parts on 48 nets.
It is built around the ATMEGA328P-PU, LM1117DT-3.3 and LM1117DT-5.0. Its parts include 10 capacitors, 7 resistors, 7 connectors, 3 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LM1117DT-3.3
TO-2520℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM1117DT-5.0
TO-2520.003%Vout 0℃~+125℃@(Tj) 1 1.3V@(800mA) 10mA 15V 5V 75dB@(120Hz) 800mA Fixed Over Current Protection、Thermal Shutdown Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C8, C9 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2, H3, H4 |
| 3 | Screw_Terminal | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J3, J3, J4 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 100uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C10 |
| 2 | 27pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 1.64k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 220ohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | AVR-ISP-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | Battery_Cell | Battery:BatteryHolder_MPD_BA9VPC_1xPP3 | BT1 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J8 |
| 1 | Crystal | Crystal:Crystal_SMD_7050-2Pin_7.0x5.0mm_HandSoldering | Y1 |
| 1 | L | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LM1117DT-3.3 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U3 |
| 1 | LM1117DT-5.0 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U1 |
| 1 | R_Potentiometer | Potentiometer_SMD:Potentiometer_ACP_CA6-VSMD_Vertical_Hole | RV1 |
| 1 | SW_Omron_B3FS | Button_Switch_THT:SW_Tactile_Straight_KSL0Axx1LFTR | SW1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal | J1 |
| 1 | WC1602A | Display:WC1602A | DS1 |
More from Brady-YinQuen/PCB-Designs
1- 4 layers99 × 99.5 mm

Similar boards
- 2 layers78 × 84 mm

- 4 layers61 × 31.8 mm

4 layer demo
masumbiswas515/Coursera-Assignments-of-Mastering-KiCAD-Open-Source-PCB-Design-for-Beginners
This respiratory consists of the peer graded assignments of the Coursera course, Mastering KiCAD: Open-Source PCB Design for Beginners.
45 partsMIT - 4 layers116 × 100 mm

- 2 layers60 × 100 mm

Sample player brain
lennartquerter/euro-rack-synth
Lenimal Github for DIY for a Eurorack Synth
160 parts13 - 2 layers396.3 × 336.1 mm

Chessconnect
K-0hm/Chessboard
Code for a chessboard with light and capacitance Touch Sensors.
260 partsGPL-3.0 - 2 layers85.8 × 94.2 mm

Fault Latch 2
LSUTigerRacing/Electronics
This repository contains all of the KiCad Schematics for the 2026 TigerRacing Formula SAE's Electronics Subsystem.
123 parts8 - 2 layers87.2 × 175.3 mm

Y6502
SunnyYoshimitsu/HTC64
Think Ben Eater's 6502 but modified....a modified BE6592...the Y!6502....
63 parts5 - 2 layers100 × 100 mm

ENRTENADOR ATMEGA1284P
iSebass/MicrocontroladoresTeoria-Practicas
Este repositorio ha sido creado como un recurso de apoyo para el curso de Microcontroladores impartido en la Universidad del Valle. En este espacio colaboraremos con el Dr. en Ingeniería Sergio Arenas y el Ing.
149 parts1
Questions
What parts does the FinalProject2 use?
38 parts, built around the ATMEGA328P-PU, LM1117DT-3.3 and LM1117DT-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FinalProject2 KiCad files?
From the Brady-YinQuen/PCB-Designs repository on GitHub, at the commit this page was made from: the board is Bicycle Speedometer/Bicycle Speedometer Design & BOM/FinalProject2/FinalProject2.kicad_pcb and its schematic Bicycle Speedometer/Bicycle Speedometer Design & BOM/FinalProject2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FinalProject2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Brady-YinQuen before reusing the design.