2 layers77 × 47 mm
ServoController
hagego/SmartHome
Tools and applications for my simple, very heterogeneous smart home
28 parts
2 layers72 × 47 mm
LedStripController
hagego/SmartHomeTools and applications for my simple, very heterogeneous smart home
- Size
- 72 × 47 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 22
- Pads
- 77
- Tracks, vias
- 178, 7
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 30 Dec 2016
- Updated
- 24 Oct 2026
Overview
LedStripController is an open-source printed circuit board by hagego, from the hagego/SmartHome repository on GitHub. It is a 2-layer board of 72 × 47 mm with 25 parts on 22 nets, routed with 178 tracks and 7 vias.
It is built around the ATTINY84A-PU, NRF24L01 and TP4056. Its parts include 4 resistors, 3 ICs, 3 connectors, 2 capacitors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY84A-PU
DIP-14-40℃~+85℃ 1.8V~5.5V 10bit 12 20MHz 512Byte 512Byte 8 Bit 8KB AVR Built-in FLASH DIP-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
NRF24L01
QFN-20-EP(4x4)-40℃~+85℃ -85dBm 0dBm 1.9V~3.6V 2.4GHz 2Mbps CRC check function、Automatic response function、Automatic retransmission function SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
README
README.mdSmartHome
Tools and applications for my simple, very heterogeneous smart home
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 2.2uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 3.7V | hagego:JST_PH_1x02_P2.00 | Bat1 |
| 1 | 470k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | ATtiny84 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | Bat 2 | hagego:JST_XH_1x02_P2.54 | Bat2 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | MCP1700x-330 | Package_TO_SOT_THT:TO-92_HandSolder | U3 |
| 1 | NRF24L01 | RF_Module:nRF24L01_Breakout | U1 |
| 1 | Prog | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | TP4056 | KiCad Library:TP4056-18650 | M1 |
| 1 | WS2812 1 | hagego:JST_XH_1x03_P2.54 | J2 |
| 1 | WS2812 2 | hagego:JST_XH_1x03_P2.54 | J3 |
| 1 | on/off | hagego:SwitchHorizontal_SK-12F14 | SW1 |
| 1 | ~ | hagego:MT3608_Module | M2 |
The 18 most common of 25 parts.
More from hagego/SmartHome
4- 2 layers88 × 52 mm
ProgrammingAdapter
hagego/SmartHome
Tools and applications for my simple, very heterogeneous smart home
24 parts - 2 layers38 × 38 mm
MultiClientSmall
hagego/SmartHome
Tools and applications for my simple, very heterogeneous smart home
20 parts - 2 layers68 × 42 mm
Similar boards
- 2 layers303.8 × 136.6 mm
Custom-75-Wireless ISO Backlit Keyboard
DominicMcGreevy/Custom-75-Wireless-ISO-Backlit-Keyboard
A custom 75% ISO backlit wireless keyboard that I have designed in KiCad. Posting here because I need help validating that I have done everything correctly.
406 parts - 2 layers57 × 57 mm
Quiet orbit qo r1-usb c four light ambient lamp board
copperheadhq/copperhead-quiet-orbit
USB-C four-light ambient lamp, 57 mm, ATtiny84A hardware PWM. Designed with copperhead. Never built: do not order expecting it to work.
27 parts3 - 2 layers96.5 × 25.4 mm
- 2 layers94 × 63.8 mm
TinySensorv1
arcadien/tinySensor
Firmware and generic board for low-power environment sensors
45 parts2MIT - 2 layers55.2 × 40.6 mm
- 2 layers35 × 28 mm
Volvo240pcb
pddenhar/Volvo_240_Info_Display
OLED dashboard module for the Volvo 240 displaying battery voltage, speed, and RPM.
18 parts2 - 2 layers90 × 40 mm
Plate
BryceVandegrift/hot-plate
A DIY PCB hot plate that uses through hole components
30 parts1CERN-OHL-W-2.0 - 2 layers92 × 45 mm
L6 - P2
AhmedAtefNasr/PCB_Course-IMT_school
Here's the repo for Assignments & projects of PCB course from IMT school
49 parts
Questions
How big is the LedStripController PCB?
It measures 72 × 47 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LedStripController use?
25 parts, built around the ATTINY84A-PU, NRF24L01 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LedStripController KiCad files?
From the hagego/SmartHome repository on GitHub, at the commit this page was made from: the board is nRF24/PCBs/LedStripController/LedStripController.kicad_pcb and its schematic nRF24/PCBs/ESP2nRF24/ESP2nRF24/ESP2nRF24.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LedStripController design in my own project?
Its repository states no licence, so its author keeps all rights: ask hagego before reusing the design.