

Quiet orbit qo r1-usb c four light ambient lamp board
USB-C four-light ambient lamp, 57 mm, ATtiny84A hardware PWM. Designed with copperhead. Never built: do not order expecting it to work.
- Size
- 57 × 57 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 28
- Pads
- 82
- Tracks, vias
- 103, 11
- Pours
- 18
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 23 Sep 2026
- Updated
- 23 Sep 2026
Overview
Quiet orbit qo r1-usb c four light ambient lamp board is an open-source printed circuit board by copperheadhq, from the copperheadhq/copperhead-quiet-orbit repository on GitHub. It is a 2-layer board of 57 × 57 mm with 27 parts on 28 nets, routed with 103 tracks and 11 vias.
It is built around the ATTINY84A-PU and 1N4148W. Its parts include 7 resistors, 5 diodes, 3 capacitors, 2 connectors and 1 IC. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATTINY84A-PU
DIP-14-40℃~+85℃ 1.8V~5.5V 10bit 12 20MHz 512Byte 512Byte 8 Bit 8KB AVR Built-in FLASH DIP-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
README
hardware/variant-milkyway/README.mdMilky Way variant
The same circuit and the same placement, with the back of the board turned into a picture: the Milky Way arching over a mountain, built from three finishes a fab can produce: copper with a mask opening (gold, on ENIG), copper under mask (purple) and bare laminate (dark purple), plus silkscreen for the stars.
*.kicad_pcb and *.kicad_pro here replace the two files of the same name one directory up.
Everything else in the project (schematic, rules, libraries) is shared.
Differences from the plain board:
- 4 mm rounded corners.
- No back GND pour. The artwork needs bare laminate for its dark sky. The artwork's gold frame, including eyelets around the M3 holes, becomes the GND ring instead, because the USB-C receptacle reaches ground partly through its shell stakes and that pour.
- The artwork's copper is floating polygons with no net, cut back from every pad, via, track and hole. Large areas of intentionally floating exposed copper will look like an error to a fab's reviewer. Say so on the order.
- Requires ENIG, not HASL. HASL would tin the exposed copper and the picture would be lost.
DRC at all severities with schematic parity after the artwork was applied: 0 / 0 / 0.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 680 | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R7 |
| 4 | Amber LED | LED_SMD:LED_1206_3216Metric | D2, D3, D4, D5 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 100mA | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | ATtiny84A | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | AVR-ISP-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | RESET | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | USB-C | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | VBUS | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | VCC | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
Similar boards
- 2 layers96.5 × 25.4 mm

- 2 layers94 × 63.8 mm

TinySensorv1
arcadien/tinySensor
Firmware and generic board for low-power environment sensors
45 parts2MIT - 2 layers55.2 × 40.6 mm

- 2 layers35 × 28 mm

Volvo240pcb
pddenhar/Volvo_240_Info_Display
OLED dashboard module for the Volvo 240 displaying battery voltage, speed, and RPM.
18 parts2 - 2 layers90 × 40 mm

Plate
BryceVandegrift/hot-plate
A DIY PCB hot plate that uses through hole components
30 parts1CERN-OHL-W-2.0 - 2 layers92 × 45 mm

L6 - P2
AhmedAtefNasr/PCB_Course-IMT_school
Here's the repo for Assignments & projects of PCB course from IMT school
49 parts - 2 layers46 × 66 mm

Door sensor schaltplan
Brawn1/ATTiny-Door-Sensor
Door Sensor Battery based with Attiny84 and HC-12 Sender
19 parts - 2 layers

Questions
How big is the Quiet orbit qo r1-usb c four light ambient lamp board PCB?
It measures 57 × 57 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Quiet orbit qo r1-usb c four light ambient lamp board use?
27 parts, built around the ATTINY84A-PU and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Quiet orbit qo r1-usb c four light ambient lamp board KiCad files?
From the copperheadhq/copperhead-quiet-orbit repository on GitHub, at the commit this page was made from: the board is hardware/variant-milkyway/quiet-orbit-qo-r1-usb-c-four-light-ambient-lamp-board.kicad_pcb and its schematic hardware/quiet-orbit-qo-r1-usb-c-four-light-ambient-lamp-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Quiet orbit qo r1-usb c four light ambient lamp board design in my own project?
Its repository states no licence, so its author keeps all rights: ask copperheadhq before reusing the design.