
Assignment 4
AhmedAtefNasr/PCB_Course-IMT_school
Here's the repo for Assignments & projects of PCB course from IMT school

Here's the repo for Assignments & projects of PCB course from IMT school
L6 - P2 is an open-source printed circuit board by AhmedAtefNasr, from the AhmedAtefNasr/PCB_Course-IMT_school repository on GitHub. It is a 2-layer board of 92 × 45 mm with 49 parts on 28 nets, routed with 241 tracks and 17 vias.
It is built around the ATTINY84A-PU. Its parts include 25 diodes, 7 resistors, 4 transistors, 4 connectors and 3 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | LED | LED_THT:LED_D5.0mm_Clear | D1, D2, D3, D10, D12, D13, D14, D15, D17, D18, D19, D20, D22, D23, D24, D25 +4 |
| 7 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D30, D31, D32, D33 |
| 4 | BC107 | Package_TO_SOT_THT:TO-18-3 | Q1, Q2, Q3, Q4 |
| 2 | C_Polarized_Small | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1, C2 |
| 2 | SW_SPDT_312 | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | SW1, SW4 |
| 1 | ATtiny84A-P | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J7 |
| 1 | Conn_01x06_Socket | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J1 |
| 1 | LED | LED_THT:LED_D3.0mm | D5 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U3 |
| 1 | LOGO | Logo:logo | G*** |
| 1 | SW_DPST_x2 | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW3 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J10 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J3 |

AhmedAtefNasr/PCB_Course-IMT_school
Here's the repo for Assignments & projects of PCB course from IMT school

AhmedAtefNasr/PCB_Course-IMT_school
Here's the repo for Assignments & projects of PCB course from IMT school

AhmedAtefNasr/PCB_Course-IMT_school
Here's the repo for Assignments & projects of PCB course from IMT school

AhmedAtefNasr/PCB_Course-IMT_school
Here's the repo for Assignments & projects of PCB course from IMT school

copperheadhq/copperhead-quiet-orbit
USB-C four-light ambient lamp, 57 mm, ATtiny84A hardware PWM. Designed with copperhead. Never built: do not order expecting it to work.


arcadien/tinySensor
Firmware and generic board for low-power environment sensors


pddenhar/Volvo_240_Info_Display
OLED dashboard module for the Volvo 240 displaying battery voltage, speed, and RPM.

BryceVandegrift/hot-plate
A DIY PCB hot plate that uses through hole components

Brawn1/ATTiny-Door-Sensor
Door Sensor Battery based with Attiny84 and HC-12 Sender

It measures 92 × 45 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the ATTINY84A-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AhmedAtefNasr/PCB_Course-IMT_school repository on GitHub, at the commit this page was made from: the board is Assignment_2/P1/L6 - P2.kicad_pcb and its schematic Assignment_1/Assignment 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AhmedAtefNasr before reusing the design.