
ServoController
hagego/SmartHome
Tools and applications for my simple, very heterogeneous smart home

Tools and applications for my simple, very heterogeneous smart home
MultiClientSmall is an open-source printed circuit board by hagego, from the hagego/SmartHome repository on GitHub. It is a 2-layer board of 38 × 38 mm with 20 parts on 20 nets, routed with 243 tracks and 4 vias.
It is built around the ATTINY84A-PU, NRF24L01 and AM312, with the BME280 and TP4056 among its other parts. Its parts include 6 ICs, 2 capacitors, 1 connector and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Tools and applications for my simple, very heterogeneous smart home
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 1M, 1M1 |
| 2 | 2.2uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 1 | 220k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 220k1 |
| 1 | 3.7V | hagego:JST_PH_1x02_P2.00 | Bat1 |
| 1 | 6V | hagego:JST_PH_1x02_P2.00 | PV1 |
| 1 | AM312 | hagego:AM312 | U5 |
| 1 | ATtiny84 | Package_DIP:DIP-14_W7.62mm_Socket | U2 |
| 1 | BH1750 | hagego:BH1750 | U4 |
| 1 | BME280 | hagego:BME280 | U6 |
| 1 | MCP1700x-330 | Package_TO_SOT_THT:TO-92_HandSolder | U3 |
| 1 | NRF24L01 | RF_Module:nRF24L01_Breakout | U1 |
| 1 | Prog | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | SW_Push_Dual | Button_Switch_THT:Push_E-Switch_KS01Q01 | SW1 |
| 1 | TP4056 | KiCad Library:TP4056-18650 | M1 |
The 16 most common of 20 parts.

hagego/SmartHome
Tools and applications for my simple, very heterogeneous smart home

hagego/SmartHome
Tools and applications for my simple, very heterogeneous smart home

hagego/SmartHome
Tools and applications for my simple, very heterogeneous smart home


KonradWohlfahrt/BirdhouseCameraSystemCameraNode
ESP32-based camera node project files for the Birdhouse Camera System.


laemo10/SuperNicePCB
An integrated, multi-sensor UWB anchor PCB designed for real-time indoor object tracking (via Double-Sided Two-Way Ranging) and non-invasive human presence/occupancy monitoring.

nate922/ceilingpuck_v4
Ceiling Puck v4 - smart ceiling sensor/actuator

SolderedElectronics/PIR-Movement-sensor-board-hardware-design
Hardware design, BOM, gerbers and 3D files for PIR-Movement-sensor-board designed by Soldered Electronics.

SolderedElectronics/PIR-movement-sensor-board-qwiic-hardware-design
Hardware design, BOM, gerbers and 3D files for PIR-movement-sensor-board-qwiic designed by Soldered Electronics.

SolderedElectronics/PIR-movement-sensor-board-with-easyC-hardware-design
Hardware design, BOM, gerbers and 3D files for PIR-movement-sensor-board-with-easyC designed by Soldered Electronics.

ThunderSloth/walkin-pir-interface
Battery-Powered PIR Motion Interface (Isolated Dry Contact)
It measures 38 × 38 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the ATTINY84A-PU, NRF24L01, AM312 and BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hagego/SmartHome repository on GitHub, at the commit this page was made from: the board is nRF24/PCBs/MultiClientSmall/MultiClientSmall.kicad_pcb and its schematic nRF24/PCBs/ESP2nRF24/ESP2nRF24/ESP2nRF24.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hagego before reusing the design.