
Birdhouse Camera System
KonradWohlfahrt/BirdhouseCameraSystemCameraNode
ESP32-based camera node project files for the Birdhouse Camera System.

Home automation ESP32 is an open-source printed circuit board by Anvay-7, from the Anvay-7/Home-Automation-PCB-ESP32 repository on GitHub. It is a 2-layer board of 146.1 × 114.3 mm with 60 parts on 71 nets, routed with 321 tracks and 5 vias.
It is built around the AM312, L7805 and BC547. Its parts include 11 resistors, 9 diodes, 6 ICs, 4 transistors and 4 switches. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
For BIT PCB Challenge 2021
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R3, R4, R5 |
| 4 | 510 | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R2, R6, R7, R8 |
| 4 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3, Q4 |
| 4 | D | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D5, D6, D7, D8 |
| 4 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Bulgin_FX0456_Vertical_Closed | F1, F2, F3, F4 |
| 4 | G5LE-1 | Relay_THT:Relay_SPDT_Omron-G5LE-1 | K1, K2, K3, K4 |
| 4 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4 |
| 4 | PC817 | Package_DIP:DIP-4_W7.62mm | U1, U2, U3, U4 |
| 4 | SW_SPDT | Button_Switch_THT:rocker_switch | Bulb SW, Fan1 SW, Fan2 SW, Window SW |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R11, R13 |
| 2 | 0.01uF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C3 |
| 1 | 470uF 50V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | AC_IN | digikey-kicad-library-master:Term_Block_1x2_P5mm | J7 |
| 1 | AM312 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | PIR sensor |
| 1 | B250C3x00-2200A | Diode_THT:Diode_Bridge_32.0x5.6x17.0mm_P10.0mm_P7.5mm | D9 |
| 1 | Bulb | digikey-kicad-library-master:Term_Block_1x3_P5mm | Bulb |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | ESP32DEVKITV1 | ESP32DEVKITV1:ESP32-DEVKITV1 | U5 |
| 1 | Fan1 | digikey-kicad-library-master:Term_Block_1x3_P5mm | Fan1 |
| 1 | Fan2 | digikey-kicad-library-master:Term_Block_1x3_P5mm | Fan2 |
| 1 | L7805 | digikey-kicad-library-master:3-SIP_Module_V7805-1000 | U7 |
| 1 | LDR03 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LDR |
| 1 | Rain Sensor | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | Rain sensor |
| 1 | Thermistor | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Thermistor |
| 1 | Transformer_1P_1S | Transformer_THT:Transformer_CHK_EI42-5VA_1xSec | T1 |
| 1 | Window | digikey-kicad-library-master:Term_Block_1x3_P5mm | Window |
The 56 most common of 60 parts.

KonradWohlfahrt/BirdhouseCameraSystemCameraNode
ESP32-based camera node project files for the Birdhouse Camera System.

laemo10/SuperNicePCB
An integrated, multi-sensor UWB anchor PCB designed for real-time indoor object tracking (via Double-Sided Two-Way Ranging) and non-invasive human presence/occupancy monitoring.

nate922/ceilingpuck_v4
Ceiling Puck v4 - smart ceiling sensor/actuator

SolderedElectronics/PIR-Movement-sensor-board-hardware-design
Hardware design, BOM, gerbers and 3D files for PIR-Movement-sensor-board designed by Soldered Electronics.

SolderedElectronics/PIR-movement-sensor-board-qwiic-hardware-design
Hardware design, BOM, gerbers and 3D files for PIR-movement-sensor-board-qwiic designed by Soldered Electronics.

SolderedElectronics/PIR-movement-sensor-board-with-easyC-hardware-design
Hardware design, BOM, gerbers and 3D files for PIR-movement-sensor-board-with-easyC designed by Soldered Electronics.

ThunderSloth/walkin-pir-interface
Battery-Powered PIR Motion Interface (Isolated Dry Contact)

donaldbell/productspeedrun
Let's see how quickly we can get a product idea off the ground.
It measures 146.1 × 114.3 mm and has 2 copper layers, 1.6 mm thick.
60 parts, built around the AM312, L7805 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Anvay-7/Home-Automation-PCB-ESP32 repository on GitHub, at the commit this page was made from: the board is Home_automation_ESP32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Anvay-7 before reusing the design.