Skip to the content

Boards by genbean

3 boards

Open-source boards designed in KiCad by genbean on GitHub, from 1 repository. A board’s address here is its repository’s there.

  • 2 layers39.3 × 33.6 mmHeliSR Rev4.0, the printed circuit board in 3D

    HeliSR Rev4.0

    genbean/UH1-Collective

    A small board for hat Rev 4 in the Huey head Rev 5 (Head/Rev5/Hat). It carries an ALPS RKJXM1015004 8-direction stick switch with a centre push, and screws to four bosses printed on the back of the lower panel.

    33 partsGPL-3.0
  • 2 layers39.3 × 33.6 mmHeliSR Rev3.0, the printed circuit board in 3D

    HeliSR Rev3.0

    genbean/UH1-Collective

    A small board for hat Rev 4 in the Huey head Rev 5 (Head/Rev5/Hat). It carries an ALPS RKJXM1015004 8-direction stick switch with a centre push, and screws to four bosses printed on the back of the lower panel.

    24 partsGPL-3.0
  • 2 layers22 × 29 mmSearchHat Rev1.0, the printed circuit board in 3D

    SearchHat Rev1.0

    genbean/UH1-Collective

    A small board for hat Rev 4 in the Huey head Rev 5 (Head/Rev5/Hat). It carries an ALPS RKJXM1015004 8-direction stick switch with a centre push, and screws to four bosses printed on the back of the lower panel.

    7 partsGPL-3.0