2 layers70 × 100 mm
2 layers70 × 99 mm
CC1 CW QRP Transceiver
- Size
- 70 × 99 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 209
- Nets
- 117
- Pads
- 548
- Tracks, vias
- 1,170, 64
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 31 Jan 2013
- Updated
- 27 Jul 2013
Overview
CC1 is an open-source printed circuit board by etherkit, from the etherkit/CC1 repository on GitHub. It is a 2-layer board of 70 × 99 mm with 209 parts on 117 nets, routed with 1,170 tracks and 64 vias.
It is built around the ATMEGA328-PU, NE5532 and 74AC08PC, with the AD9834BRU, LP2985-33DBV and MMBFJ310 among its other parts. Its parts include 79 capacitors, 58 resistors, 14 connectors, 13 inductors and 10 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
12
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
NE5532
SOP-8-22V~22V 0℃~+70℃ 100dB 10nA 14mA 2 40V/us 42mA 4mV 800nA 8nV/√Hz@30Hz Built-in compensation SOP-8 Operational Amplifier ROHSSungineOperational Amplifier
74AC08PC
DIP-14-40℃~+85℃ 100mV、360mV、440mV 2 2.1V~3.85V 2.56V、2.9V、3.86V、4.4V、4.86V、5.4V 24mA 24mA 2V~6V 2uA 4 7.5ns@5V,50pF 74AC Series 900mV~1.65V AND Gate DIP-14 Logic Gates ROHSonsemiLogic Gates
AD9834BRU
TSSOP2020mW Power, 2.3V to 5.5V, 75MHz Complete DDSAnalog DevicesUncategorised
LP2985-33DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MMBFJ310
SOT-23-55℃~+150℃ 1 N-channel 25V 2V 350mW 60mA N-Channel SOT-23 JFETs ROHSonsemiJFETsBAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching Diodes
BZV55-B15
SOD-80CVoltage Regulator DiodeNexperiaUncategorised
BAT46W
SOD-123-55℃~+125℃ 1 Independent 100V 150mA 2uA@75V 450mV@10mA 750mA SOD-123 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesBAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes
FDS86106
SO-8-55℃~+150℃ 1 N-channel 100V 105mΩ@10V 208pF 3.4A 4V 4nC@10V 5W SO-8 MOSFETs ROHSonsemiMOSFETsSSF-LXH240GID
插件25mA、30mA 2V、2.2V 30mcd、30mcd 40° 565nm、627nm Red, Emerald Green 插件 LED Indication - Discrete ROHSLumexLED Indication - Discrete
README
README.mdCC1
CC1 CW QRP Transceiver
Parts
209| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 100n | SM0805 | C2, C12, C13, C14, C15, C18, C19, C23, C30, C31, C32, C34, C35, C37, C38, C42 +14 |
| 8 | 33k | SM0805 | R5, R6, R7, R39, R40, R43, R44, R45 |
| 7 | 100k | SM0805 | R1, R2, R3, R8, R32, R38, R57 |
| 7 | 1u MLCC | SM0805 | C5, C11, C17, C25, C56, C64, C69 |
| 6 | 10n | SM0805 | C61, C65, C71, C72, C74, C76 |
| 6 | 2.2k | SM0805 | R13, R16, R23, R27, R31, R61 |
| 5 | 100n | CAPACITOR2 | C53, C54, C55, C57, C62 |
| 5 | 47 | SM0805 | R12, R18, R28, R33, R36 |
| 5 | 6.144 MHz | AT49 | X1, X2, X3, X4, X5 |
| 5 | C | SM0805 | C1, C3, C4, C7, C10 |
| 5 | L-IRONCORE | T37-V | L2, L3, L9, L10, L11 |
| 4 | 220 | SM0805 | R20, R30, R35, R59 |
| 4 | 4.7k | SM0805 | R47, R49, R58, R60 |
| 4 | P*** | MOUNTINGHOLE | 1PIN, 1PIN, 1PIN, 1PIN |
| 3 | 100 | SM0805 | C39, C40, R26 |
| 3 | 100u | CAP-ELEC-8MM | C20, C29, C51 |
| 3 | 10k | SM0805 | R34, R42, R46 |
| 3 | 180 | SM0805 | C21, C24, C28 |
| 3 | 1k | SM0805 | R37, R52, R53 |
| 3 | 22 | SM0805 | C67, R19, R29 |
| 3 | 2N7002 | SOT23-2N7002 | Q1, Q2, Q3 |
| 3 | 47k | SM0805 | R17, R25, R51 |
| 3 | 6.8k | SM0805 | R9, R22, R54 |
| 3 | MMBFJ310 | SOT23-MMBFJ310 | Q5, Q6, Q8 |
| 2 | 10u | CAP-ELEC-5MM | C33, C36 |
| 2 | 150 | SM0805 | C22, C27 |
| 2 | 2.7k | SM0805 | R15, R24 |
| 2 | 200 | SM0805 | R55, R56 |
| 2 | 3.3n | SM0805 | C16, C26 |
| 2 | 39 | SM0805 | C68, C73 |
| 2 | 4.7u MLCC | SM0805 | C66, C75 |
| 2 | BAV99 | SOT23-DIODEDUAL | D2, D3 |
| 2 | BF998 | SOT143B | Q4, Q7 |
| 2 | BN2402-43 5T | BN2402 | L4, L5 |
| 2 | BZV55-B15 | SOD80 | D5, D7 |
| 2 | CTRIM | TRIMCAP-MURATA | C6, C8 |
| 2 | FT37-43 10T | T37-V | L7, L8 |
| 2 | FT37-61 33T:3T | T37-STEPDOWN | T1, T2 |
| 2 | T37-2 21T | T37-V | L12, L13 |
| 1 | +12V | SIL-1 | P6 |
| 1 | +12V | DCPOWER-KOBICONN-163-7620-E | J8 |
| 1 | +3.3V | SIL-1 | P5 |
| 1 | +5V | SIL-1 | P8 |
| 1 | 10 | SM0805 | R21 |
| 1 | 100 | SM1210 | R50 |
| 1 | 1u | SM0805 | L6 |
| 1 | 22k | SM0805 | R48 |
| 1 | 3.3k | SM0805 | R11 |
| 1 | 45 | TRIMCAP-MURATA | C41 |
| 1 | 470 | SM0805 | R14 |
| 1 | 51 | SM0805 | R62 |
| 1 | 68 | SM0805 | C70 |
| 1 | 74AC08 | SO14N | U2 |
| 1 | AD9834 | TSSOP20 | U5 |
| 1 | ADC | SIL-3 | J7 |
| 1 | AF Gain | RV09AF-20-20K-A14 | R4 |
| 1 | ATMEGA328P | TQFP32 | U3 |
| 1 | AVR-ISP | AVR-ISP-6-TH | J4 |
| 1 | Antenna | BNC-AMPHENOL-31-5431-10RFX | J9 |
| 1 | BAT46W | SOD123 | D1 |
| 1 | BAT54S | SOT23-DIODEDUAL | D4 |
| 1 | BFO | SIL-1 | P2 |
| 1 | CMD | PTS645VH58LFS | S2 |
| 1 | Drive | SIL-1 | P3 |
| 1 | FDS86106 | SO8N | Q9 |
| 1 | FREQ | PTS645VH58LFS | S1 |
| 1 | GND | SIL-1 | P7 |
| 1 | GPS | M40-4010646 | J6 |
| 1 | I2C | SIL-4 | J3 |
| 1 | IRLML9301 | SOT23-2N7002 | Q10 |
| 1 | Key | STX-3120-5B | J2 |
| 1 | L-IRONCORE | T50-V | L1 |
| 1 | LOGO | OSHWLogo4mm | G*** |
| 1 | LP2985-3.3 | SOT23-5 | U6 |
| 1 | LP2985-5 | SOT23-5 | U7 |
| 1 | NE5532 | SO8N | U1 |
| 1 | OPA820IDBVT | SOT23-5 | U8 |
| 1 | Phones | STX-3120-5B | J1 |
| 1 | R | SM0805 | R10 |
| 1 | SSF-LXH240GID | SSF-LXH240GID | D6 |
The 202 most common of 209 parts.
Questions
How big is the CC1 PCB?
It measures 70 × 99 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CC1 use?
209 parts, built around the ATMEGA328-PU, NE5532, 74AC08PC and AD9834BRU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CC1 KiCad files?
From the etherkit/CC1 repository on GitHub, at the commit this page was made from: the board is pcb/CC1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CC1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask etherkit before reusing the design.
Similar boards
- 2 layers120 × 90 mm
- 2 layers
BreadBin
c0pperdragon/BreadBin
A CPU made of 7400 logic on breadboards - inside a bread bin ;-)
45 parts18 - 2 layers101.6 × 83.8 mm
Z80DevBoard
dbuchwald/Z80DevBoard
Simple Z80 based prototyping and development board designed as extension to Arduino Mega 2560
39 parts3MIT - 2 layers172.7 × 108.6 mm
Clementina hardware
fran150/clementina-hardware
KiCad schematic for Clementina, a 3.3V W65C02S computer with a Raspberry Pi Pico 2 W (MIA) handling video, audio, storage and I/O.
48 partsGPL-3.0 - 2 layers233.4 × 280 mm
- 4 layers46 × 31 mm
- 6 layers160 × 100 mm
