

- Size
- 19.9 × 90.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 61
- Pads
- 245
- Tracks, vias
- 545, 65
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Jul 2024
- Updated
- 19 Mar 2026
Overview
ELI2040 is an open-source printed circuit board by Emute-Lab-Instruments, from the Emute-Lab-Instruments/ELI2040 repository on GitHub. It is a 2-layer board of 19.9 × 90.4 mm with 50 parts on 61 nets, routed with 545 tracks and 65 vias.
It is built around the RP2040, W25Q128JVSIQ and TLV76733DRVR, with the TS-1187A-B-A-B and TYPE-C 16PIN 2MD(073) among its other parts. Its parts include 22 capacitors, 10 resistors, 7 connectors, 4 ICs and 3 diodes. It belongs with the RP2040 boards of this library.
Main components
5RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHTLV76733DRVR
WSON-6(2x2)-40℃~+125℃@(Tj) 1 1.4V@(1A) 16V 1A 3.3V 46dB@(1MHz) 50uA 60uVrms Fixed Over Current Protection、Over Temperature Protection、Soft Start Positive WSON-6(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTS-1187A-B-A-B
SMD-4P,5.1x5.1mm-30℃~+85℃ 1.5mm 1.6N 100,000 cycles 12V 5.1mm 5.1mm 50mA Gold No Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,5.1x5.1mm Tactile Switches ROHSXKB ConnectionTactile SwitchesTYPE-C 16PIN 2MD(073)
SMD-25℃~+85℃ 1 10 thousand cycles 16P 3A 5V Black Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSSHOU HANUSB Connectors
README
ELI2040b/README.mdELI2040
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C6, C10, C11, C14, C16, C17, C18, C20, C21, C24, C33, C37 |
| 3 | 1.5k | Resistor_SMD:R_0603_1608Metric | R31, R37, R65 |
| 2 | 1N5819 | Diode_SMD:D_SOD-323 | D1, D4 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C12, C15 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C5 |
| 2 | 22u 0805 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C8 |
| 2 | 27 | Capacitor_SMD:C_0402_1005Metric | R21, R22 |
| 2 | 30p | Capacitor_SMD:C_0402_1005Metric | C27, C28 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J8 |
| 2 | TLV76733DRVR | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias | U1, U4 |
| 2 | TS-1187A-B-A-B | emutelab:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL-2 | SW1, SW2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | ADCs Header | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x26 | Connector_PinHeader_2.54mm:PinHeader_1x27_P2.54mm_Vertical | J4 |
| 1 | DNF | Capacitor_SMD:C_01005_0402Metric | R30 |
| 1 | GND1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | GND2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | LED Test | LED_SMD:LED_0603_1608Metric | D15 |
| 1 | Power Header | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | RP2040 | emutelab:RP2040-QFN-56 | U7 |
| 1 | TYPE-C_16PIN_2MD(073) | emutelab:USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U11 |
| 1 | YXC X322512MSB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
More from Emute-Lab-Instruments/ELI2040
2- 4 layers19.9 × 90.4 mm

- 4 layers19.9 × 90.4 mm

Similar boards
- 4 layers155 × 103 mm

- 4 layers50.1 × 85.2 mm

LIONv3
RodrigoCAndrade/LIONv3-R
The LIONv3-R is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.
89 parts4 - 4 layers50.2 × 40.2 mm

LIONv3
RodrigoCAndrade/LIONv3-Mini
The LIONv3-Mini is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.
88 parts2 - 2 layers40.6 × 108 mm

Useq1
Emute-Lab-Instruments/uSEQ
Hardware & firmware of the uSEQ Live Coding CV & Gate Sequencer
172 parts44 - 4 layers100 × 68 mm

- 2 layers26.5 × 34.4 mm

PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0 - 4 layers142 × 119.7 mm

- 2 layers475 × 139.9 mm

Skogaslider main pcb
skogaby/skogaslider
Firmware, CAD, and PCB files for the skogaslider, an RP2040-based controller to simulate Chunithm's gameplay experience
175 parts18MIT
Questions
How big is the ELI2040 PCB?
It measures 19.9 × 90.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ELI2040 use?
50 parts, built around the RP2040, W25Q128JVSIQ, TLV76733DRVR and TS-1187A-B-A-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ELI2040 KiCad files?
From the Emute-Lab-Instruments/ELI2040 repository on GitHub, at the commit this page was made from: the board is ELI2040a/ELI2040.kicad_pcb and its schematic ELI2040a/ELI2040.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ELI2040 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Emute-Lab-Instruments before reusing the design.