Skip to the content
2 layers77 × 57.8 mmExtraice, the printed circuit board in 3D

ExtraICE4 is a competition robot called Micromouse.

Size
77 × 57.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
73
Nets
107
Pads
374
Tracks, vias
677, 181
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
17 Jun 2023
Updated
11 Jul 2024

Overview

Extraice is an open-source printed circuit board by elkel53930, from the elkel53930/extraice4 repository on GitHub, published under the MIT licence. It is a 2-layer board of 77 × 57.8 mm with 73 parts on 107 nets, routed with 677 tracks and 181 vias.

It is built around the MUN12AD01-SG, DRV8837CDSG and AS5047D, with the BCR421UW6, LSM6DSR and XC6221B302GR-G among its other parts. Its parts include 18 capacitors, 15 resistors, 12 ICs, 9 connectors and 7 diodes. It belongs with the ESP32 boards of this library.

Main components

8

README

README.md

ExtraICE4

ExtraICE4 is a competition robot called Micromouse.

For more information on Micromouse competitions, please see the website of the New Technology Foundation.

Hardware

  • 3DCAD data by Fusion360 : https://t.co/qPmjVBnEnc
    • STL file for 3D printing : under mecha directory
  • Schematic and PCB design by KiCad7 : under kicad/extraice directory

Firmware

The firmware is written by Rust language.

See The Rust on ESP Book for instructions on how to set up the development environment.

The firmware is located under fsw directory. This directory is a sub-module, which is actually the micromouse-esp32 repository.

Parts

73
QtyValueFootprintReferences
100603 50V 0.1uFCapacitor_SMD:C_0201_0603MetricC3, C5, C7, C8, C9, C12, C14, C15, C16, C19
50603 10kResistor_SMD:R_0201_0603MetricR2, R8, R14, R15, R16
40603 1kResistor_SMD:R_0201_0603MetricR4, R5, R6, R9
40603 470 1%Resistor_SMD:R_0201_0603MetricR1, R7, R10, R12
4L-31ROPT1CMicromouse:OSI5FU3A11CQ1, Q2, Q3, Q4
4OSI5FU3A11CMicromouse:OSI5FU3A11CD1, D2, D3, D4
4Φ1.4Micromouse:Hole1.4H1, H2, H3, H4
32012 35V 10uFCapacitor_SMD:C_0805_2012MetricC2, C18, C21
3Conn_01x02Micromouse:MotorPadJ8, J9, J10
3DRV8837CPackage_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mmU9, U10, U11
21005 N/MCapacitor_SMD:C_0402_1005MetricC11, C13
21608 35V 1uFCapacitor_SMD:C_0603_1608MetricC1, C10
2AS5047DPackage_SO:TSSOP-14_4.4x5mm_P0.65mmU8, U12
2EncSideMicromouse:EncoderTerminalJ3, J6
2MainSideMicromouse:EncoderTerminalJ4, J7
10603 22kResistor_SMD:R_0201_0603MetricR13
10603 6.2Resistor_SMD:R_0201_0603MetricR11
11608 B LEDLED_SMD:LED_0603_1608MetricD7
11608 G LEDLED_SMD:LED_0603_1608MetricD6
11608 R LEDLED_SMD:LED_0603_1608MetricD5
13225 25V 22uFCapacitor_SMD:C_1210_3225MetricC4
1830108208709Oscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mmX1
1B3U-1000PButton_Switch_SMD:SW_SPST_B3U-1000PSW2
1BCR421Library:SOT-26U2
1Conn_01x02Micromouse:B2B-ZHJ1
1Conn_01x05Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_VerticalJ5
1DG2034EDNLibrary:QFN-12-1EP_3x3mm_P0.5_EP1.15x1.15U1
1ESP32-S3-FN8Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mmU7
1LOGOMicromouse:AMacLogoG***
1LSM6DSRPackage_LGA:Bosch_LGA-14_3x2.5mm_P0.5mmU5
1MB85RC64TALibrary:LCC-8P-M04U4
1MUN12AD01-SGLibrary:MUN12AD01-SGU3
1PCM12SMTRButton_Switch_SMD:SW_SPDT_PCM12SW1
1XC6221B302GRPackage_TO_SOT_SMD:SOT-23-5U6

More from elkel53930/extraice4

2
  • 2 layers62 × 26 mmIf chg board, the printed circuit board in 3D

    If chg board

    elkel53930/extraice4

    ExtraICE4 is a competition robot called Micromouse.

    47 parts4MIT
  • 2 layers5 × 10 mmBattery branch, the printed circuit board in 3D

    Battery branch

    elkel53930/extraice4

    ExtraICE4 is a competition robot called Micromouse.

    3 parts4MIT

Similar boards

  • 2 layers75.5 × 61 mmExtraice, the printed circuit board in 3D

    Extraice

    elkel53930/extraice5

    96 parts
  • 4 layers95 × 56 mmJag v1, the printed circuit board in 3D

    Jag v1

    soerenmeier/jag-board

    Jag board is an attempt to make a pcb which can be used to control different kinds of rc vehicles. At first the focus will be on rc cars, which can be controlled via a web interface and a webcam.

    70 parts2Apache-2.0
  • 2 layers70 × 76 mmElec, the printed circuit board in 3D

    Elec

    elkel53930/daylight

    Manual RoboSweep Agent

    103 parts2
  • 2 layers67 × 45 mmUVDAR Board, the printed circuit board in 3D

    UVDAR Board

    ctu-mrs/mrs_hw_uvdar

    Hardware for UVDAR.

    63 parts1MIT
  • 2 layers50 × 50 mmSeriallight, the printed circuit board in 3D

    Seriallight

    eurovibes/seriallight

    Enlight the shiny Berlin S-Bahn character lights

    71 parts
  • 2 layers38.1 × 67.9 mmPcb lab-3, the printed circuit board in 3D

    Pcb lab-3

    vladbelous/pcb-lab-3

    PCB Lab #3 - Current Sourcing

    93 parts
  • 2 layers27.8 × 45 mmMothbeam, the printed circuit board in 3D

    Mothbeam

    Digital-Naturalism-Laboratories/Mothbox_Electronics

    This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…

    26 parts3MIT
  • 2 layers165.1 × 80.6 mmFuse, the printed circuit board in 3D

    Fuse

    Staybq/FP

    89 parts

Questions

How big is the Extraice PCB?

It measures 77 × 57.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Extraice use?

73 parts, built around the MUN12AD01-SG, DRV8837CDSG, AS5047D and BCR421UW6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Extraice KiCad files?

From the elkel53930/extraice4 repository on GitHub, at the commit this page was made from: the board is kicad/extraice/extraice.kicad_pcb and its schematic kicad/battery_branch/battery_branch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Extraice design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).