

Extraice
- Size
- 75.5 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 111
- Pads
- 380
- Tracks, vias
- 747, 199
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Aug 2024
- Updated
- 13 Aug 2024
Overview
Extraice is an open-source printed circuit board by elkel53930, from the elkel53930/extraice5 repository on GitHub. It is a 2-layer board of 75.5 × 61 mm with 96 parts on 111 nets, routed with 747 tracks and 199 vias.
It is built around the ESP32-S3-PICO-1-N8R2, AS5047D and DRV8837CDSG, with the XC6221B302GR-G, LSM6DSR and IRLML6344 among its other parts. Its parts include 28 capacitors, 21 resistors, 18 ICs, 8 connectors and 5 transistors. It belongs with the ESP32 boards of this library.
Main components
10ESP32-S3-PICO-1-N8R2
LGA-56-EP(7x7)LGA-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsAS5047D
14-Bit On-Axis Magnetic Rotary Position Sensor with 11-Bit Decimal and Binary Incremental Pulse CountOSRAMUncategorisedDRV8837CDSG
WSON-8-EP(2x2)-40℃~+85℃ 1 1.8V~7V 1A 1Ω Yes WSON-8-EP(2x2) Brushed DC Motor Drivers ROHSTexas InstrumentsBrushed DC Motor DriversXC6221B302GR-G
USP-4-40℃~+85℃@(Ta) 1 200mA 25uA 3V 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive USP-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorUncategorisedLSM6DSR
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 9KB Accelerometer Gyroscope SPI、I2C、MIPI I3C X,Y,Z X,Y,Z ±16g ±4000dps LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometersIRLML6344
SOT-23-55℃~+150℃ 1 N-channel 1.1V 1.3W 29mΩ@4.5V 30V 46pF 5A 6.8nC@4.5V 650pF SOT-23 MOSFETs ROHSGuangdong HottechMOSFETsBAS516
SOD-523Switching DiodeshongjiachengMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)PCM12SMTR
SMD-20℃~+85℃ 6V PC Pin Rectangular Columnar SPDT Surface Mount,Vertical SMD Slide Switches ROHSC&KSlide SwitchesSMT-0440-T-2-R
--20℃~+70℃ 2.5mm 2V~4V 4kHz 4mm 4mm 70dB Electromagnetic Passive (Externally Driven) - Buzzers ROHSPUI Audio, Inc.Buzzers
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 1005 50V 0.1uF | Capacitor_SMD:C_0402_1005Metric | C10, C11, C13, C14, C15, C16, C20, C22, C24, C25, C28 |
| 10 | 1608 6.3V 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C6, C7, C9, C12, C18, C19 |
| 8 | 1005 10k | Resistor_SMD:R_0402_1005Metric | R2, R3, R5, R14, R16, R22, R24, R26 |
| 5 | 1005 25V 1uF | Capacitor_SMD:C_0402_1005Metric | C21, C23, C26, C27, C29 |
| 5 | ADCS7476 | Package_TO_SOT_SMD:SOT-23-6 | U4, U10, U11, U18, U19 |
| 4 | 1005 1k | Resistor_SMD:R_0402_1005Metric | R1, R4, R17, R18 |
| 4 | 1005 1k 0.5% | Resistor_SMD:R_0402_1005Metric | R10, R27, R28, R29 |
| 4 | 1608 10 | Resistor_SMD:R_0603_1608Metric | R6, R8, R9, R23 |
| 4 | IRLML6344 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4, Q5 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4 |
| 4 | Φ1.4 | Micromouse:Hole1.4 | H1, H2, H3, H4 |
| 2 | 1608 LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | 3225 3.3u 16V | Capacitor_SMD:C_1210_3225Metric | C5, C8 |
| 2 | AS5047D | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U7, U8 |
| 2 | Conn_01x02 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | J4, J5 |
| 2 | DRV8837C | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U2, U5 |
| 2 | EncSide | Micromouse:EncoderTerminal | J6, J8 |
| 2 | MainSide | Micromouse:EncoderTerminal | J7, J9 |
| 2 | XC6221B302GR | Package_TO_SOT_SMD:SOT-23-5 | U1, U17 |
| 2 | ~ | Micromouse:PhotoSensorL | U12, U13 |
| 2 | ~ | Micromouse:PhotoSensorR | U14, U15 |
| 2 | Φ2.2 | MountingHole:MountingHole_2.2mm_M2 | H5, H6 |
| 1 | 1005 470 1% | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 1608 R LED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | BAS516 | Diode_SMD:D_SOD-523 | D3 |
| 1 | Conn_01x02 | Micromouse:B2B-ZH | J1 |
| 1 | Conn_01x05 | Connector_PinHeader_1.27mm:PinHeader_1x05_P1.27mm_Vertical | J3 |
| 1 | ESP32-S3-PICO-1-N8R2 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm | U3 |
| 1 | LSM6DSR | Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm | U9 |
| 1 | MB85RC64TA | Library:LCC-8P-M04 | U6 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | PCM12SMTR | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | SMT-0440-T-2-R | Library:SMT-0440-T-2-R | LS1 |
More from elkel53930/extraice5
1- 2 layers27.7 × 19 mm

Similar boards
- 2 layers77 × 57.8 mm

- 4 layers

- 2 layers92 × 64.8 mm

- 4 layers95 × 56 mm

Jag v1
soerenmeier/jag-board
Jag board is an attempt to make a pcb which can be used to control different kinds of rc vehicles. At first the focus will be on rc cars, which can be controlled via a web interface and a webcam.
70 parts2Apache-2.0 - 2 layers84 × 114 mm

- 4 layers83.1 × 92.5 mm

- 4 layers41.1 × 53 mm

Vacuum Tweezers
Legohead259/Vacuum-Tweezers-ECAD
KiCAD repository for the electrical designs for the SL_ST vacuum tweezer design
64 parts1MIT - 4 layers57 × 39 mm

Questions
How big is the Extraice PCB?
It measures 75.5 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Extraice use?
96 parts, built around the ESP32-S3-PICO-1-N8R2, AS5047D, DRV8837CDSG and XC6221B302GR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Extraice KiCad files?
From the elkel53930/extraice5 repository on GitHub, at the commit this page was made from: the board is kicad/extraice/extraice.kicad_pcb and its schematic kicad/extraice/extraice.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Extraice design in my own project?
Its repository states no licence, so its author keeps all rights: ask elkel53930 before reusing the design.