

Seriallight
Enlight the shiny Berlin S-Bahn character lights
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 71
- Nets
- 59
- Pads
- 173
- Tracks, vias
- 277, 31
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Jun 2021
- Updated
- 14 Jun 2021
Overview
Seriallight is an open-source printed circuit board by eurovibes, from the eurovibes/seriallight repository on GitHub. It is a 2-layer board of 50 × 50 mm with 71 parts on 59 nets, routed with 277 tracks and 31 vias.
It is built around the ATTINY404-SSN, SP3485CN-L and RS485, with the BCR421UW6, L78M05CV and SM4007 among its other parts. Its parts include 34 diodes, 9 connectors, 8 resistors, 7 ICs and 4 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7ATTINY404-SSN
SOIC-14-40℃~+105℃ 1.8V~5.5V 10bit 12 128Byte 20MHz 256Byte 4KB 8 Bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)SP3485CN-L
SOIC-80℃~+70℃ 1 1 10Mbps 3V~3.6V Transceiver SOIC-8 RS-485 / RS-422 ICs ROHSMaxLinearRS-485 / RS-422 ICsRS485
SOP-81 1 1.2mA 2.5Mbps 256 5V Half-Duplex Transceiver ±4kV SOP-8 RS-485 / RS-422 ICs ROHSGRRS-485 / RS-422 ICsBCR421UW6
SOT-26-55℃~+150℃ 1 10% 350mA 40V Built-in Over-Temperature Protection (OTP) PWM SOT-26 LED Drivers ROHSDiodes IncorporatedLED DriversL78M05CV
TO-2200℃~+150℃@(Tj) 1 2V 35V 40uV 500mA 5V 62dB@(120Hz) 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSM4007
MELFMELF Diodes - General Purpose ROHSYONGYUTAIDiodes - General PurposeSS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
71| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | LED | LED_SMD:LED_Cree-XQ | D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113, D114, D115, D116 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R103, R104, R107, R108 |
| 4 | 82 | Resistor_SMD:R_0402_1005Metric | R101, R102, R105, R106 |
| 4 | BCR421UW6 | Package_TO_SOT_SMD:SOT-23-6 | U102, U103, U106, U107 |
| 4 | blue | LED_SMD:LED_0603_1608Metric | D125, D127, D129, D131 |
| 4 | green | LED_SMD:LED_0603_1608Metric | D118, D120, D122, D124 |
| 4 | red | LED_SMD:LED_0603_1608Metric | D117, D119, D121, D123 |
| 4 | white | LED_SMD:LED_0603_1608Metric | D126, D128, D130, D132 |
| 2 | PWR | TerminalBlock_WAGO:TerminalBlock_WAGO_236-102_1x02_P5.00mm_45Degree | J101, J108 |
| 2 | RS485 | TerminalBlock_WAGO:TerminalBlock_WAGO_236-102_1x02_P5.00mm_45Degree | J107, J109 |
| 2 | ~ | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H102, H103 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C104 |
| 1 | 10µ | Capacitor_SMD:C_0805_2012Metric | C101 |
| 1 | 1µ | Capacitor_SMD:C_0402_1005Metric | C103 |
| 1 | 22µ | Capacitor_SMD:C_0805_2012Metric | C102 |
| 1 | 750mA | Fuse:Fuse_1812_4532Metric_Castellated | F101 |
| 1 | ATtiny404-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U104 |
| 1 | B | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP103 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J102 |
| 1 | G | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP102 |
| 1 | IO0 | TestPoint:TestPoint_Pad_D1.0mm | J104 |
| 1 | IO1 | TestPoint:TestPoint_Pad_D1.0mm | J105 |
| 1 | IO2 | TestPoint:TestPoint_Pad_D1.0mm | J106 |
| 1 | IO3 | TestPoint:TestPoint_Pad_D1.0mm | J103 |
| 1 | L78M05 | Package_TO_SOT_SMD:TO-252-2 | U101 |
| 1 | LOGO | eurovibes:LOGO | G*** |
| 1 | R | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP101 |
| 1 | SM4007 | Diode_SMD:D_MELF | D134 |
| 1 | SP3485CN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U105 |
| 1 | SS14 | Diode_SMD:D_SMA | D133 |
| 1 | W | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP104 |
| 1 | ~ | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad | H101 |
Similar boards
- 2 layers87 × 72 mm

- 2 layers169.4 × 48.8 mm

Usb morse keyer
dilshan/usb-morse-keyer
PIC16F886 based CW auto key controller with USB support
84 parts17MIT - 2 layers65.3 × 100 mm

Mutant SMD
soggybag/Mutant-SMD
A redesign of the Mutant generative synth (MeeBleeps, https://github.com/Meebleeps/MeeBleeps-Mutant-Synth), based on the Eurorack version in /Documents/Arduino/projects/MutantGenerativeArduinoSynth/ (Instructables…
49 parts - 2 layers80 × 100 mm

Ultimate temp controller
Technariumas/ultimate-temperature-controller
Thermocouple based kiln/oven temperature controller accessable via RS485 or LCD/keypad. Supports temperature profiles on a SD card.
76 parts4Apache-2.0 - 2 layers66 × 81.3 mm

- 2 layers77 × 57.8 mm

- 2 layers67 × 45 mm

- 2 layers38.1 × 67.9 mm

Questions
How big is the Seriallight PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Seriallight use?
71 parts, built around the ATTINY404-SSN, SP3485CN-L, RS485 and BCR421UW6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Seriallight KiCad files?
From the eurovibes/seriallight repository on GitHub, at the commit this page was made from: the board is seriallight.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Seriallight design in my own project?
Its repository states no licence, so its author keeps all rights: ask eurovibes before reusing the design.