Skip to the content
2 layers38.1 × 67.9 mmPcb lab-3, the printed circuit board in 3D

PCB Lab #3 - Current Sourcing

Size
38.1 × 67.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
93
Nets
59
Pads
269
Tracks, vias
526, 71
Pours
7
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
21 Jul 2020
Updated
21 Jul 2020

Overview

Pcb lab-3 is an open-source printed circuit board by vladbelous, from the vladbelous/pcb-lab-3 repository on GitHub. It is a 2-layer board of 38.1 × 67.9 mm with 93 parts on 59 nets, routed with 526 tracks and 71 vias.

It is built around the NCS2333D and BCR421UW6. Its parts include 27 connectors, 24 resistors, 15 capacitors, 7 ICs and 4 transistors.

Main components

2

Parts

93
QtyValueFootprintReferences
16Conn_01x02local_footprints:Pin_Header_Straight_1x02_Pitch2.54mmJ2, J3, J4, J303, J304, J305, J306, J307, J308, J402, J403, J404, J407, J501, J502, J503
100.1ulocal_footprints:0805_HSC1, C3, C4, C301, C302, C304, C305, C401, C405, C406
9SolderJumper_2_Openlocal_footprints:SolderJumper-2_P1.3mm_OpenJP1, JP2, JP301, JP302, JP303, JP304, JP401, JP402, JP403
81klocal_footprints:0805_HSR2, R5, R301, R302, R306, R307, R404, R405
7100klocal_footprints:0805_HSR1, R3, R6, R303, R304, R308, R406
51ulocal_footprints:1206_HSC2, C303, C402, C403, C404
41local_footprints:1210_HSR7, R305, R309, R407
4Q_NMOS_GSDlocal_footprints:SOT-23_HSQ1, Q301, Q302, Q401
4USB_B_Microlocal_footprints:USB-micro-B_4-legs_BanggoodJ1, J301, J302, J401
33.3klocal_footprints:0805_HSR4, R401, R402
3NCS2333local_footprints:SOIC-8_3.9x4.9mm_Pitch1.27mm_HSU1, U301, U401
3TestPointlocal_footprints:SMD-TestPoint_01x01TP1, TP401, TP402
2Conn_01x03local_footprints:Pin_Header_Straight_1x03_Pitch2.54mmJ5, J405
2Conn_01x03_Femalelocal_footprints:Pin_Header_Straight_1x03_Pitch2.54mmJ309, J311
2INA181local_footprints:SOT-23-6_HSU302, U402
1100local_footprints:1206_HSR408
1100local_footprints:RV-Pot_3-pin_2.54mmRV501
1100klocal_footprints:RV-Pot_3-pin_2.54mmRV301
110klocal_footprints:RV-Pot_3-pin_2.54mmRV302
110klocal_footprints:1206_HSR403
150klocal_footprints:RV-Pot_3-pin_2.54mmRV1
1BCR421Ulocal_footprints:SOT-23-6_HSU501
1Conn_01x02_FemaleTestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mmJ406
1Conn_01x02_Femalelocal_footprints:Pin_Header_Straight_1x02_Pitch2.54mmJ310
1Conn_01x04local_footprints:Pin_Header_Straight_1x04_Pitch2.54mmJ6
1MCP4011local_footprints:SOIC-8_3.9x4.9mm_Pitch1.27mm_HSU2

Similar boards

  • 2 layers77 × 57.8 mmExtraice, the printed circuit board in 3D

    Extraice

    elkel53930/extraice4

    ExtraICE4 is a competition robot called Micromouse.

    73 parts4MIT
  • 2 layers67 × 45 mmUVDAR Board, the printed circuit board in 3D

    UVDAR Board

    ctu-mrs/mrs_hw_uvdar

    Hardware for UVDAR.

    63 parts1MIT
  • 2 layers50 × 50 mmSeriallight, the printed circuit board in 3D

    Seriallight

    eurovibes/seriallight

    Enlight the shiny Berlin S-Bahn character lights

    71 parts
  • 2 layers27.8 × 45 mmMothbeam, the printed circuit board in 3D

    Mothbeam

    Digital-Naturalism-Laboratories/Mothbox_Electronics

    This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…

    26 parts3MIT
  • 2 layers165.1 × 80.6 mmFuse, the printed circuit board in 3D

    Fuse

    Staybq/FP

    89 parts
  • 2 layers390 × 93 mmPots, the printed circuit board in 3D

    Pots

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    93 parts960Apache-2.0
  • 2 layers217.6 × 68.1 mmKeezyboost40, the printed circuit board in 3D

    Keezyboost40

    ChrisChrisLoLo/keezyboost40

    4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware

    93 parts202CC-BY-SA-4.0
  • 2 layers100 × 100 mmControl, the printed circuit board in 3D

    Control

    imihajlow/ccpu

    A 8-bit computer made of 74xx series logic gates and memory ICs.

    93 parts145

Questions

How big is the Pcb lab-3 PCB?

It measures 38.1 × 67.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pcb lab-3 use?

93 parts, built around the NCS2333D and BCR421UW6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcb lab-3 KiCad files?

From the vladbelous/pcb-lab-3 repository on GitHub, at the commit this page was made from: the board is pcb-lab-3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcb lab-3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask vladbelous before reusing the design.