Skip to the content
2 layers217.6 × 68.1 mmKeezyboost40, the printed circuit board in 3D

4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware

Size
217.6 × 68.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
93
Nets
78
Pads
544
Tracks, vias
511, 106
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
9 Jul 2022
Updated
14 Apr 2024

Overview

Keezyboost40 is an open-source printed circuit board by ChrisChrisLoLo, from the ChrisChrisLoLo/keezyboost40 repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 217.6 × 68.1 mm with 93 parts on 78 nets, routed with 511 tracks and 106 vias.

Its parts include 41 switches, 40 diodes and 2 ICs. It belongs with the keyboards and input and lEDs and displays boards and the RP2040 boards of this library.

README

README.md

keezyboost40

A 4x10 low profile ortholinear keyboard with an lcd screen in the center. Uses the Raspberry Pi Pico as well as firmware written in Rust (though QMK works too*)

Features

  • Low Profile
    • Keyboard is around 16.5mm thick, keys and keycaps included
  • 1.8" LCD Screen
    • Ample real estate for animations, UI, games(?), etc.
  • Uses the Raspberry Pi Pico
    • 2MB of flash storage
      • Lots of room for programming with MicroPython, or room for graphics and code
  • Parts readily available
    • Only SMD parts required are diodes and kailh choc hotswap sockets
  • Supports QMK or Rust firmware
    • QMK hex can be found in firmware file
    • Uses Keyberon as the firmware base, allowing for a "modular" firmware that can easily be built upon
    • More details can be found in DESIGN.md

Display demo here:

keezyboost40 display demo

Status

Prototypes are functional, though firmware is still WIP! v0.0 needs a jumper cable from the Pico to the reset pin in the TFT, but works perfectly fine with the Raspberry Pi Pico aside from that. v0.1 fixes this issue (currently in the master branch), though hasn't been produced and tested yet.

I need to fix a bug with the animation slowing down, though I suspect it'll mostly involve tinkering with RTOS timings

PCB

You can generate the gerbers from source in the pcb directory, and send off imediately to PCBWay or the like. PCBWay has helped sponsor this project, and has provided a fast, easy service while ordering from them. I was also suprised how well my board came out desipte being quite oddly shaped, so I recommend checking them out for your next project!

BOM

The following is the materials you will want/need to make your own keezyboost40. Note that anything amount after a + denotes the rough amount of spares you may want to have when ordering the parts. Anything involving the acrylic screen is optional. Even the LCD is optional if you prefer more of a lumberjack-y vibe :)

PartCountNotes
PCB1duh
Kailh Choc Hotswap Switches40+10
LL4148 SMD Diodes40+10This board uses SMD diodes exclusively. I found though-hole diodes often easily slipped around in a way such that the board was no longer able to fit inside the case
1.8" ST7735 TFT1Generally speaking, you want the one with the Red PCB. Do NOT use the one from Adafruit, as the pin order on that one is different
Raspberry Pi Pico1Try to get the original or a very similar clone with castellated pins. From casual testing, other RP2040 boards may not work (for example, the Pico clones from WeAct can't seem to properly drive the LCD with 3.3V logic)
Rubber Feet6+2Any should generally work, though I'm using ~2.5mm thick ones, as they give more space for screw heads, as well as the magnetic connector I'm using
3D Printed Case1You could use PCB printing services like PCBWay to make one in resin, though I haven't confirmed if they'd be durable enough to survive in transit
M2 Nuts10+56 nuts to hold the PCB to the case, and another 4 to hold the acrylic screen to the PCB. I'm using nylon nuts, though any should work. I recommend you grab this with a hex spacer kit, as you get all the M2 parts you need in a single purchase!
M2 8mm Double Female spacer4+2Spacers to keep the acrylic from the pcb
M2 12mm Screw4+2Screws for the acrylic screen
M2 6mm Screw6+3Screws for the PCB and case. Be careful of the size of the screw head! the flatter the better!
Acrylic Screen1You can cut one out using the svgs in the outlines folder

Design

See DESIGN.md for small insights about the design choices that went into this board.

Directory Structure

  • case You can find the files you need in this folder to print out a case for the keyboard
  • drafts Stores any KLE or intermediate information used in making the case
  • firmware Used to store any firmware relating to the keyboard. Merges to the QMK repo planned.
  • outlines Outlines used for the acrylic screen. Use these to cut your own!
  • pcb Kicad project relating to the project

Parts

93
QtyValueFootprintReferences
401N4148Diode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +24
40SW_SPSTkeyswitches:Kailh_socket_PG1350SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +24
6MountingHoleMountingHole:MountingHole_2.2mm_M2H5, H6, H7, H8, H9, H10
4MountingHoleMountingHole:MountingHole_2.2mm_M2_DIN965_PadH1, H2, H3, H4
1Picokicub_keyboard_extras:RPi_Pico_SMD_TH_OPENU1
1ST7735_1.8inchkicub_keyboard_extras:ST7735_1.8inchU2
1SW_SPSTButton_Switch_SMD:SW_SPST_FSMSMSW41

More from ChrisChrisLoLo/keezyboost40

1
  • 2 layers217.6 × 68.1 mmKeezyboost40, the printed circuit board in 3D

    Keezyboost40

    ChrisChrisLoLo/keezyboost40

    4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware

    92 parts202CC-BY-SA-4.0

Similar boards

  • 2 layers390 × 93 mmPots, the printed circuit board in 3D

    Pots

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    93 parts960Apache-2.0
  • 2 layers100 × 100 mmControl, the printed circuit board in 3D

    Control

    imihajlow/ccpu

    A 8-bit computer made of 74xx series logic gates and memory ICs.

    93 parts145
  • 2 layers147 × 80 mmController, the printed circuit board in 3D

    Controller

    voltlog/Valve-Actuator

    If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.

    93 parts108GPL-3.0
  • 2 layers276 × 87.1 mmMolekula2, the printed circuit board in 3D

    Molekula2

    zzeneg/molekula

    Framework for building ergo keyboards

    93 parts98MIT
  • 2 layers30 × 46 mmXESC, the printed circuit board in 3D

    XESC

    embeddedalpha/PCB-Design

    Repository for PCB Design Projects

    93 parts77MIT
  • 2 layers145.1 × 107.7 mmAurora l, the printed circuit board in 3D

    Aurora l

    Musab-Hassan/aurora_keyboard

    A gorgeous split wireless ortholinear keyboard that you can build yourself.

    93 parts64GPL-3.0
  • 2 layersPsoc5power2, the printed circuit board in 3D

    Psoc5power2

    profdc9/DRSSTC-PCB-Pack

    A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.

    93 parts59
  • 2 layers199.5 × 100.5 mmSPC EVDR, the printed circuit board in 3D

    SPC EVDR

    weteor/SPC_EVDR

    38 key otholinear keyboard with offset spacebar(s)

    93 parts59CERN-OHL-P-2.0

Questions

How big is the Keezyboost40 PCB?

It measures 217.6 × 68.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Keezyboost40 use?

93 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Keezyboost40 KiCad files?

From the ChrisChrisLoLo/keezyboost40 repository on GitHub, at the commit this page was made from: the board is pcb/keezyboost40/keezyboost40.kicad_pcb and its schematic pcb/keezyboost40/keezyboost40.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Keezyboost40 design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).