
Carte logique
ECE3SAT/ECE3SAT_ADCS
Repository of the Attitude Determination & Control System (ADCS) of ECE³SAT

Repository of the Attitude Determination & Control System (ADCS) of ECE³SAT
H bridge is an open-source printed circuit board by ECE3SAT, from the ECE3SAT/ECE3SAT_ADCS repository on GitHub. It is a 2-layer board with 28 parts on 18 nets, routed with 85 tracks and 0 vias.
It is built around the FQP13N10 and FQP27P06. Its parts include 8 resistors, 8 connectors, 6 diodes and 6 transistors. It belongs with the interfaces and adapters boards of this library.
#ECE3SAT
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x01 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J2, J4, J5, J6, J7, J8 |
| 4 | 1N4007 | Diodes_THT:D_A-405_P10.16mm_Horizontal | D2, D3, D4, D5 |
| 2 | 100k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R7, R8 |
| 2 | 10V | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | D1, D6 |
| 2 | 10k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R5 |
| 2 | 1k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R6 |
| 2 | 4k7 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
| 2 | BF259 | TO_SOT_Packages_THT:TO-39-3_Window | Q1, Q6 |
| 2 | FQP13N10 | TO_SOT_Packages_THT:TO-220-3_Vertical | Q3, Q5 |
| 2 | FQP27P06 | TO_SOT_Packages_THT:TO-220-3_Vertical | Q2, Q4 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | Conn_01x05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J1 |

ECE3SAT/ECE3SAT_ADCS
Repository of the Attitude Determination & Control System (ADCS) of ECE³SAT

mattronix/battery-board
KiCad hardware project for the battery-to-radio interface of an AN/PRC‑152(A) reproduction radio. It contains two small PCBs that mate through spring‑loaded pogo‑pin contacts, plus a shared custom KiCad footprint…

mattwach/portable_led_lamp
Contains firmware, schematics and 3D models for a LED lamp that can accept a wide range of voltages.

pietwauters/esp32_scoring_device_hardware
Hardware files for the scoring device

xHain-hackspace/xDoorPiHat
Schematics and Boardfiles for PiHat that opens and closes the xDoor


borisg912/3DNA
This project creates a flat cylindrical DNA model with: - Magnetic DNA bases with color-coded NeoPixel LEDs and unique resistor values for identification - Interactive base pairing game that validates correct DNA base…

d-diot/ESP8266-LolinV3-Lamp
A pcb for the NodeMCU Lolin V3 board with power management for a WS2812 LED strip

rbat05/SolarWeatherStation
Self-sustaining weather monitoring system with dual-node architecture.
28 parts, built around the FQP13N10 and FQP27P06. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ECE3SAT/ECE3SAT_ADCS repository on GitHub, at the commit this page was made from: the board is PhaseB/Helmholtz coils - CubeSat/Hbridge/H-bridge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ECE3SAT before reusing the design.