Skip to the content
2 layers79.7 × 27.2 mmAMP hat, the printed circuit board in 3D

Various PCBs

Size
79.7 × 27.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
15
Pads
42
Tracks, vias
86, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 Jun 2025
Updated
16 Apr 2026

Overview

AMP hat is an open-source printed circuit board by djarky, from the djarky/PCBs repository on GitHub. It is a 2-layer board of 79.7 × 27.2 mm with 19 parts on 15 nets, routed with 86 tracks and 0 vias.

It is built around the BC548, BD139 and BD140. Its parts include 6 resistors, 3 transistors, 2 capacitors, 2 diodes and 2 connectors. It belongs with the audio and music boards of this library.

Main components

3

README

README.md

PCBs

Various PCBs

  • game controller based on digispark
  • clap switch with relay
  • amps?
  • others

Parts

19
QtyValueFootprintReferences
4, , ,
21N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2
23.3Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR5, R6
11.5kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR2
11000uFCapacitor_THT:CP_Radial_D10.0mm_P7.50mmC2
122Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR3
1470Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR4
147uFCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC1
15.6kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1
1AudioJack2Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_HorizontalJ4
1BC548Package_TO_SOT_THT:TO-92_InlineQ1
1BD139Package_TO_SOT_THT:TO-126-3_Horizontal_TabDownQ2
1BD140Package_TO_SOT_THT:TO-126-3_Horizontal_TabDownQ3
1OUTTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ2

More from djarky/PCBs

12
  • 2 layersFuente, the printed circuit board in 3D

    Fuente

    djarky/PCBs

    Various PCBs

    29 parts
  • 2 layers144.8 × 121.2 mmAMP manny, the printed circuit board in 3D

    AMP manny

    djarky/PCBs

    Various PCBs

    28 parts
  • 2 layers70.7 × 84.6 mmPower suply, the printed circuit board in 3D

    Power suply

    djarky/PCBs

    Various PCBs

    20 parts
  • 2 layersMany2, the printed circuit board in 3D

    Many2

    djarky/PCBs

    Various PCBs

    18 parts
  • 2 layers109.4 × 70.2 mmAMP joseph, the printed circuit board in 3D

    AMP joseph

    djarky/PCBs

    Various PCBs

    17 parts
  • 2 layers91 × 33 mmLatch, the printed circuit board in 3D

    Latch

    djarky/PCBs

    Various PCBs

    17 parts
  • 2 layers64.9 × 31.8 mmLogic probe, the printed circuit board in 3D

    Logic probe

    djarky/PCBs

    Various PCBs

    17 parts
  • 2 layers101.5 × 86 mmPower suply, the printed circuit board in 3D

    Power suply

    djarky/PCBs

    Various PCBs

    14 parts
  • 2 layers100 × 80 mmApc556fix, the printed circuit board in 3D

    Apc556fix

    djarky/PCBs

    Various PCBs

    12 parts
  • 2 layersDigiJoypad, the printed circuit board in 3D

    DigiJoypad

    djarky/PCBs

    Various PCBs

    12 parts
  • 2 layersAMP 2n3055, the printed circuit board in 3D

    AMP 2n3055

    djarky/PCBs

    Various PCBs

    11 parts

Similar boards

  • 2 layers135.8 × 56.1 mmPower board, the printed circuit board in 3D

    Power board

    xtarke/automated_buggy

    This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.

    87 parts5GPL-3.0
  • 2 layers100 × 100 mmAmply, the printed circuit board in 3D

    Amply

    T76-org/amply

    A $10 desktop Bluetooth amplifier you'll love

    67 parts14GPL-3.0
  • 2 layers84.5 × 82.6 mmClassab amp, the printed circuit board in 3D

    Classab amp

    prydin/classab-amp-mosfet

    MOSFET-based 50W Class AB amplifier

    67 parts9
  • 2 layers40 × 99 mmOutput mixer, the printed circuit board in 3D

    Output mixer

    mohoyt/output_mixer

    Simple 4 channel Eurorack output mixer

    114 parts7CERN-OHL-S-2.0
  • 2 layers101.3 × 102.4 mmOpamp front, the printed circuit board in 3D

    Opamp front

    prydin/opamp-frontend-class-ab

    The result is a fast amplifier (>80V/us slew rate) with low distortion (0.00045% meadured @ 1kHz/1W/8ohm resistive load). It's undergone some preliminary measurements and looks quite promising.

    93 parts4
  • 2 layers120.1 × 120 mmMono amplifier, the printed circuit board in 3D

    Mono amplifier

    dario0603/AB-class-amplifier

    Design and simulation of a Class-AB audio power amplifier, focusing on output-stage linearity, crossover distortion reduction, and overcurrent protection.

    97 parts1
  • 4 layers150.3 × 132.3 mmMRIAMP, the printed circuit board in 3D

    MRIAMP

    msayad97/Amplifier

    235 parts1
  • 2 layers111.1 × 44.5 mm1KVA Power Supply, the printed circuit board in 3D

    1KVA Power Supply

    Ogbonna-Joseph/1KVA-SINE-WAVE-POWER-INVERTER

    This is a design of a sine wave power inverter, which can be used in your homes and offices.

    33 parts1

Questions

How big is the AMP hat PCB?

It measures 79.7 × 27.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AMP hat use?

19 parts, built around the BC548, BD139 and BD140. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AMP hat KiCad files?

From the djarky/PCBs repository on GitHub, at the commit this page was made from: the board is AMP_hat/AMP_hat.kicad_pcb and its schematic AMP_ANT/AMP_manny.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AMP hat design in my own project?

Its repository states no licence, so its author keeps all rights: ask djarky before reusing the design.