2 layers
2 layers
Fuente optx
djarky/PCBsVarious PCBs
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 13
- Pads
- 59
- Tracks, vias
- 215, 16
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 21 Jun 2025
- Updated
- 16 Apr 2026
Overview
Fuente optx is an open-source printed circuit board by djarky, from the djarky/PCBs repository on GitHub. It is a 2-layer board with 29 parts on 13 nets, routed with 215 tracks and 16 vias.
Its parts include 10 diodes, 7 capacitors, 5 resistors and 3 ICs.
README
README.mdPCBs
Various PCBs
- game controller based on digispark
- clap switch with relay
- amps?
- others
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D6, D7, D10 |
| 3 | 1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5, C6, C7 |
| 3 | LED | LED_THT:LED_D5.0mm | D5, D8, D9 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4, R5 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2, R3 |
| 2 | 2200u | Capacitor_THT:CP_Radial_D17.0mm_P7.50mm | C1, C2 |
| 2 | 5K | Potentiometer_THT:Potentiometer_Vishay_T93YA_Vertical | RV1, RV2 |
| 1 | 100n | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C3 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | C | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C4 |
| 1 | LM317_TO-220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LM337_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | LOGO | LogoArky:logo_1 | G*** |
The 28 most common of 29 parts.
More from djarky/PCBs
12- 2 layers144.8 × 121.2 mm
- 2 layers70.7 × 84.6 mm
- 2 layers79.7 × 27.2 mm
- 2 layers
- 2 layers109.4 × 70.2 mm
- 2 layers91 × 33 mm
- 2 layers64.9 × 31.8 mm
- 2 layers101.5 × 86 mm
- 2 layers100 × 80 mm
- 2 layers
- 2 layers
Similar boards
- 2 layers52.3 × 10.5 mm
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
29 parts5.1kGPL-3.0 - 2 layers56 × 20 mm
HallEffectXY Endstop
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
29 parts1.1kGPL-3.0 - 2 layers50 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
29 parts1kGPL-3.0 - 2 layers16.8 × 13.6 mm
E Fidget Lite
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
29 parts915 - 2 layers85 × 12.5 mm
TERES PCB3-TOUCH BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
29 parts578Apache-2.0 - 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers80 × 55 mm
- 2 layers55 × 58 mm
Questions
What parts does the Fuente optx use?
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fuente optx KiCad files?
From the djarky/PCBs repository on GitHub, at the commit this page was made from: the board is fuente_optx/fuente_optx.kicad_pcb and its schematic AMP_ANT/AMP_manny.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fuente optx design in my own project?
Its repository states no licence, so its author keeps all rights: ask djarky before reusing the design.