4 layers236.1 × 156.9 mm
4 layers120 × 350 mm
Currypi
devguardio/currypi9RPI CM4 datacenter blade
- Size
- 120 × 350 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 248
- Nets
- 534
- Pads
- 2,980
- Tracks, vias
- 7,082, 2,665
- Pours
- 66
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Aug 2021
- Updated
- 12 Oct 2021
Overview
Currypi is an open-source printed circuit board by devguardio, from the devguardio/currypi repository on GitHub. It is a 4-layer board of 120 × 350 mm with 248 parts on 534 nets, routed with 7,082 tracks and 2,665 vias.
It is built around the FSUSB30MUX, G3VM-61VY2-TR and 0826-1X1T-GH-F, with the 0879-2C2R-54 and 2N7002K among its other parts. Its parts include 69 capacitors, 66 resistors, 22 ICs, 22 diodes and 19 connectors.
Main components
5
FSUSB30MUX
MSOP-10-40℃~+85℃ 12ns 13ns 250ps 2:1 3V~4.3V 6.5pF 6.5Ω 720MHz MSOP-10 Analog Switches, Multiplexers ROHSonsemiAnalog Switches, Multiplexers
G3VM-61VY2-TR
SOP-4-40℃~+110℃ 1.27V 1000MΩ 100us 1Ω 3.75kV 500mA 600us 60V One set normally open: 2A (SPST - normally open) SOP-4 Solid State Relays (MOS Output) ROHSOmronSolid State Relays (MOS Output)
0826-1X1T-GH-F
插件-40℃~+85℃ 1 Copper alloy Gold Right Angle Shielded With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSBel FuseEthernet Connectors / Modular Connectors (RJ45 RJ11)0879-2C2R-54
插件0℃~+70℃ 4 Copper alloy Gold Shielded With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSBel FuseEthernet Connectors / Modular Connectors (RJ45 RJ11)
2N7002K
SOT-23-55℃~+150℃ 1 N-channel 1.2Ω@10V、1.4Ω@5V 1.6V 2.9pF 300pC@4.5V 30pF 380mA 4.2pF 540mW 60V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdCurryPI - RPI CM4 Cluster
Parts
248| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C10, C11, C12, C13, C28, C29, C30, C35, C36, C37, C38, C39, C46 +19 |
| 26 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP17, JP18, JP19, JP20, JP21, JP22, JP23 +10 |
| 25 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5, C14, C15, C16, C17, C18, C19, C31, C32, C33, C40, C41, C42, C50, C58, C59 +9 |
| 20 | LED | LED_SMD:LED_0603_1608Metric | D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 +4 |
| 19 | 1k | Resistor_SMD:R_0402_1005Metric | R4, R5, R7, R25, R26, R28, R39, R40, R42, R53, R54, R56, R67, R68, R70, R75 +3 |
| 15 | 470 | Resistor_SMD:R_0402_1005Metric | R12, R13, R14, R33, R34, R35, R47, R48, R49, R61, R62, R63, R71, R72, R73 |
| 10 | DF40HC_3.0_-100DS-0.4V_51_PNP_OVERLAY | dg_rpi:HRS_DF40HC(3.0)-100DS-0.4V(58)_PNP_OVERLAY | J2, J3, J4, J8, J14, J15, J16, J17, J18, J19 |
| 10 | OKR-T_6-W12-C | dg_power:MURATACASEC90 | IC1, IC2, IC3, IC4, IC5, IC6, IC7, IC8, IC9, IC10 |
| 9 | 100uF | Capacitor_SMD:C_1206_3216Metric | C1, C8, C27, C34, C45, C52, C63, C70, C81 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R8, R9, R10, R11, R15, R16 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4, H5, H6 |
| 5 | 100k | Resistor_SMD:R_0402_1005Metric | R6, R27, R41, R55, R69 |
| 5 | 1K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R24, R38, R52, R66 |
| 5 | 261 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R22, R36, R50, R64 |
| 5 | 432 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R23, R37, R51, R65 |
| 5 | G3VM-61VY2-TR | dg_relay:G3VM-SOP | RLA1, RLA2, RLA3, RLA4, RLA5 |
| 5 | Header_2x6_2.54mm | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J7, J9, J10, J11, J12 |
| 5 | Polyfuse | Fuse:Fuse_2920_7451Metric_Castellated | F1, F2, F3, F4, F5 |
| 5 | rpi_cm4 | dg_rpi:rpi_cm4 | U1, U4, U6, U8, U10 |
| 4 | m.2_pcie_nvme | dg_connectors:m.2_pcie_nvme | U2, U5, U7, U9 |
| 3 | 0 | Resistor_SMD:R_0402_1005Metric | R79, R81, R83 |
| 3 | FSUSB30MUX | Package_SO:MSOP-10_3x3mm_P0.5mm | U3, U11, U12 |
| 3 | Fan_4pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1, M2, M3 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | Conn_02x04_Odd_Even | Connector_Molex:Molex_Mini-Fit_Jr_5569-08A2_2x04_P4.20mm_Horizontal | J5, J6 |
| 2 | D_TVS | Diode_SMD:D_SMA | D1, D2 |
| 1 | 0826-1X1T-GH-F | dg_connectors:BEL_0826-1X1T-GH-F | J13 |
| 1 | 0879-2C2R-54 | dg_connectors:BEL_0879-2C2R-54 | J20 |
| 1 | 12K | Resistor_SMD:R_0402_1005Metric | R76 |
| 1 | 2N7002K | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 4.7K | Resistor_SMD:R_0402_1005Metric | R77 |
| 1 | DNP | Resistor_SMD:R_0402_1005Metric | R74 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_9.8x8mm_SilkScreen | LOGO1 |
Questions
How big is the Currypi PCB?
It measures 120 × 350 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Currypi use?
248 parts, built around the FSUSB30MUX, G3VM-61VY2-TR, 0826-1X1T-GH-F and 0879-2C2R-54. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Currypi KiCad files?
From the devguardio/currypi repository on GitHub, at the commit this page was made from: the board is currypi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Currypi design in my own project?
Its repository states no licence, so its author keeps all rights: ask devguardio before reusing the design.
Similar boards
- 4 layers100 × 69.5 mm
- 2 layers93 × 85 mm
- 4 layers108 × 110 mm
- 2 layers106 × 102.3 mm
- 4 layers120 × 120 mm
Yellow
NabuCasa/yellow
Home Assistant Yellow - hardware for Home Assistant which grows with your needs.
322 parts116 - 4 layers83 × 83 mm
PWNSAT
Pwnsat/PWNCUBE
PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research
139 parts29 - 4 layers100 × 100 mm
