6 layers150 × 160 mm
4 layers108 × 110 mm
AP2000
imagestream/kicad1Kicad designs and libraries
- Size
- 108 × 110 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 152
- Nets
- 241
- Pads
- 699
- Tracks, vias
- 1,180, 708
- Pours
- 42
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210824)
- Created
- 15 Jun 2020
- Updated
- 3 Sep 2022
Overview
AP2000 is an open-source printed circuit board by imagestream, from the imagestream/kicad repository on GitHub, published under the MIT licence. It is a 4-layer board of 108 × 110 mm with 152 parts on 241 nets, routed with 1,180 tracks and 708 vias.
It is built around the 74LVC1G07SE-7-MS, SN74LVC07AD and CH340N, with the ATECC608A-MAHDA-S, HMHA2801AR2 and TL431AIDBVR among its other parts. Its parts include 52 capacitors, 41 resistors, 20 diodes, 10 ICs and 6 connectors. It belongs with the Raspberry Pi (Linux) boards of this library.
Main components
12
74LVC1G07SE-7-MS
SC-70-5SC-70-5 Buffers, Drivers, Receivers, Transceivers ROHSMSKSEMIBuffers, Drivers, Receivers, Transceivers
SN74LVC07AD
SOIC-14-40℃~+125℃ 1 1.65V~5.5V 10uA 2.6ns@5V,50pF 24mA 6 74LVC Open-drain Unidirectional SOIC-14 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
CH340N
SOP-8-20℃~+70℃ 1 2Mbps 3.3V、5V USB 2.0 USB to serial SOP-8 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
ATECC608A-MAHDA-S
UDFN-8(2x3)-40℃~+85℃ 150nA 2V~5.5V ECC、SHA-256、AES-128 I2C UDFN-8(2x3) Security Verification / Encryption ICs ROHSMicrochip TechnologySecurity Verification / Encryption ICs
HMHA2801AR2
SOP-4-1.27mm-55℃~+100℃ 1 1.3V 160% 210mW 3.75kV 3us 3us 400mV@10mA,2mA 50mA 50mA 6V 80% 80V DC Phototransistor SOP-4-1.27mm Transistor, Photovoltaic Output Optoisolators ROHSonsemiTransistor, Photovoltaic Output Optoisolators
TL431AIDBVR
SOT-23-5-40℃~+85℃ 1.8uA 100mA 2.495V~36V 2.5V~36V 600uA Adjustable Parallel ±1% SOT-23-5 Voltage Reference ROHSJSMSEMIVoltage Reference
B2100
SMB(DO-214AA)100V 2A 790mV@2A 7uA@100V Independent SMB(DO-214AA) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
MMSD4148T1G-MS
SOD-1231.25V@150mA 150mA 1uA 400mW 4A 4ns 75V SOD-123 Switching Diodes ROHSMSKSEMISwitching Diodes
VLS6045EX-1R5N
SMD,6x6mm1.5uH 17mΩ 5.3A 8.2A ±30% SMD,6x6mm Power Inductors ROHSTDKPower Inductors
0826-1X1T-GH-F
插件-40℃~+85℃ 1 Copper alloy Gold Right Angle Shielded With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSBel FuseEthernet Connectors / Modular Connectors (RJ45 RJ11)
BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes
FDS86242
SO-8-55℃~+150℃ 1 N-channel 13nC@10V 150V 4.1A 4V 5W 64pF 760pF 85pF 98mΩ@6V N-Channel SO-8 MOSFETs ROHSonsemiMOSFETs
README
README.mdkicad
Kicad designs and libraries
Parts
152| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n 50v | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C19, C23, C30, C39, C40, C48, C49, C55, C56, C62 |
| 12 | 22uF 16V | Capacitor_SMD:C_1206_3216Metric | C12, C13, C14, C15, C31, C35, C50, C51, C52, C57, C58, C59 |
| 9 | B2100 | Diode_SMD:D_SMA | D4, D5, D6, D7, D8, D10, D11, D12, D13 |
| 6 | 10u 25v | Capacitor_SMD:C_0805_2012Metric | C37, C47, C53, C54, C60, C61 |
| 6 | 1K 1% | Resistor_SMD:R_0603_1608Metric | R1, R6, R7, R10, R19, R22 |
| 5 | 10K 1% | Resistor_SMD:R_0603_1608Metric | R21, R26, R30, R33, R38 |
| 4 | 1000p 100v | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6, C7 |
| 4 | 300 OHM | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1, FB2, FB3, FB4 |
| 4 | HeatSink | Scott:CM4_Mounting_Hole | H6, H7, H8, H9 |
| 4 | LED Green | LED_SMD:LED_0603_1608Metric | D2, D3, D19, D20 |
| 3 | 2K 1% | Resistor_SMD:R_0603_1608Metric | R24, R25, R34 |
| 3 | Mounting Hole | MountingHole:MountingHole_3.7mm_Pad_TopBottom | H2, H3, H4 |
| 3 | TPS563249DDCR | Package_TO_SOT_SMD:SOT-23-6 | U10, U11, U13 |
| 2 | .1u 100v | Capacitor_SMD:C_0603_1608Metric | C8, C27 |
| 2 | 0R 1% | Resistor_SMD:R_0603_1608Metric | R17, R61 |
| 2 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C16, C17 |
| 2 | 1u 25v | Capacitor_SMD:C_0805_2012Metric | C18, C36 |
| 2 | 2.2K | Resistor_SMD:R_0603_1608Metric | R40, R41 |
| 2 | 2.2u 100v | Capacitor_SMD:C_1210_3225Metric | C10, C25 |
| 2 | 4.7K | Resistor_SMD:R_0603_1608Metric | R20, R57 |
| 2 | 470R | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | DNS 4.7K 1% | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | MMSD4148T1G | Diode_SMD:D_SOD-123 | D16, D18 |
| 2 | RaspberryPiCM4Hirose | AP3000:Hirose-DF40C-100DS-0.4V | CM1, CM2 |
| 2 | USB_OTG | Scott:AMPHENOL_10118194-0001LF | J1, J2 |
| 2 | VLS6045EX-1R5N | Scott:L_TDK_VLS6045 | L2, L3 |
| 1 | .022u 50v | Capacitor_SMD:C_0603_1608Metric | C38 |
| 1 | .082 1% | Resistor_SMD:R_1206_3216Metric | R31 |
| 1 | .47u 16V | Capacitor_SMD:C_0603_1608Metric | C32 |
| 1 | 0826-1X1T-GH-F | 0826-1X1T-GH-F:BEL_0826-1X1T-GH-F | J9 |
| 1 | 10 1% | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 100K 1% | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 100pF 50V | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 15K 1% | Resistor_SMD:R_0603_1608Metric | R37 |
| 1 | 2.2nF 2KV | Capacitor_SMD:C_1210_3225Metric | C28 |
| 1 | 2.61K 1% | Resistor_SMD:R_0603_1608Metric | R35 |
| 1 | 20 | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 2200pF 100v | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 22u 100v | Capacitor_SMD:CP_Elec_8x10.5 | C11 |
| 1 | 22u 25v | Capacitor_SMD:CP_Elec_5x5.4 | C29 |
| 1 | 24.9K 1% | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 330p 50v | Capacitor_SMD:C_0603_1608Metric | C33 |
| 1 | 332 1% | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 33n 25v | Capacitor_SMD:C_0603_1608Metric | C34 |
| 1 | 34K 1% | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 39K 1% | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 4.42K 1% | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 4.99K 1% | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 45.3K 1% | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 63.4 1% | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 7.5 5% 1W | Resistor_SMD:R_2512_6332Metric | R4 |
| 1 | 73.2K 1% | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 744042003 | Scott:WE-TPC_4818_482892-744042003 | L1 |
| 1 | 74LVC1G07SE-7 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | 750K 1% | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | ATECC608A-MAHDA | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.5mm | U2 |
| 1 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D17 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J11 |
| 1 | Boot | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Bus_PCI_Express_Mini | Scott:BUS_PCI_Express_Mini_Full | J12 |
| 1 | CH340N | Package_SO:SOP-8_5.28x5.23mm_P1.27mm | U1 |
| 1 | ComputeModule4 | AP3000:Raspberry-Pi-4-Compute-Module | Module1 |
| 1 | DFLU1200-7 | Diode_SMD:D_PowerDI-123 | D14 |
| 1 | FDS86242 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | HMHA2801AR2 | Package_SO:SOP-4_4.4x2.6mm_P1.27mm | U12 |
| 1 | HeatSink | MountingHole:MountingHole_3.7mm_Pad_TopBottom | H1 |
| 1 | LED Red | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LightPipe | Scott:VCC_LightPipe_7511A62 | H5 |
| 1 | SBR8A60P5-13 | Diode_SMD:D_PowerDI-5 | D15 |
| 1 | SMAJ58A | Diode_SMD:D_SMA | D9 |
| 1 | SN74LVC07AD | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U3 |
| 1 | SW_SPST | Switches:SWITCH TACTILE SPST-NO 0.05A 12V | SW1 |
| 1 | TL431AIDBVR | Package_TO_SOT_SMD:SOT-23 | U6 |
| 1 | TPS23751PWPR | Scott:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | IC2 |
| 1 | TSE265 / 7491195112 | Scott:Transformer_EP13 | TR1 |
| 1 | VLS6045EX-1R0N | Scott:L_TDK_VLS6045 | L4 |
Questions
How big is the AP2000 PCB?
It measures 108 × 110 mm and has 4 copper layers, 1.6 mm thick.
What parts does the AP2000 use?
152 parts, built around the 74LVC1G07SE-7-MS, SN74LVC07AD, CH340N and ATECC608A-MAHDA-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AP2000 KiCad files?
From the imagestream/kicad repository on GitHub, at the commit this page was made from: the board is AP2000/AP2000.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AP2000 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from imagestream/kicad
12- 6 layers150 × 160 mm
- 4 layers186 × 226 mm
- 4 layers186 × 226 mm
- 2 layers186 × 226 mm
- 4 layers105 × 105 mm
- 2 layers186 × 226 mm
- 2 layers186 × 226 mm
- 2 layers186 × 226 mm
- 2 layers110 × 100 mm
- 2 layers186 × 226 mm
- 2 layers50.8 × 22.9 mm
Similar boards
- 2 layers100 × 102 mm
- 2 layers147.5 × 50.8 mm
Prueba
UPNAdrone/JavaFAWT
Open-source fan array wind tunnel (FAWT) software and hardware
27 parts2Apache-2.0 - 4 layers100 × 55 mm
Resonant converter
Dominik-Workshop/resonant-converter
Resonant converter PCB, 60V -> 12V 10A
147 parts1MIT - 2 layers70.6 × 70.6 mm
- 4 layers120 × 350 mm
- 4 layers100 × 69.5 mm
- 2 layers93 × 85 mm
- 2 layers106 × 102.3 mm
