4 layers120 × 350 mm
2 layers93 × 85 mm
Pibox
aep/pibox4rpi cm4 breakout
- Size
- 93 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 104
- Pads
- 525
- Tracks, vias
- 2,272, 263
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Nov 2020
- Updated
- 17 Nov 2020
Overview
Pibox is an open-source printed circuit board by aep, from the aep/pibox4 repository on GitHub. It is a 2-layer board of 93 × 85 mm with 44 parts on 104 nets, routed with 2,272 tracks and 263 vias.
It is built around the TPD4E02B04DQAR, AZ1117CH-3.3TRG1-50 and 0826-1X1T-GH-F, with the SM3ZS067U215AB among its other parts. Its parts include 15 capacitors, 14 resistors, 8 connectors and 6 ICs.
Main components
4
TPD4E02B04DQAR
USON-10(1x2.5)-40℃~+125℃ 0.33pF 10nA 17W@8/20us 2A@8/20us 3.6V 7.5V 8.8V Bidirectional Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS USON-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSTexas InstrumentsESD And Surge Protection (TVS/ESD)
AZ1117CH-3.3TRG1-50
SOT-223-20℃~+125℃@(Tj) 1 1.3V@(800mA) 15V 1A 3.3V 6mA 70dB@(120Hz) Fixed Overheat protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
0826-1X1T-GH-F
插件-40℃~+85℃ 1 Copper alloy Gold Right Angle Shielded With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSBel FuseEthernet Connectors / Modular Connectors (RJ45 RJ11)SM3ZS067U215AB
M.2 (PCIe) Card Edge Connector, 75 Positions , 0.5mm Pitch, Key ID BJAEUncategorised
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | R | Resistors:0603 | R1, R2, R3, R4, R5, R6, R7, R8, R9, R14 |
| 9 | C | Capacitors:0603 | C1, C2, C3, C4, C5, C6, C10, C11, C14 |
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C15, C17, C18, C21 |
| 3 | R0 | Resistor_SMD:R_0603_1608Metric | R11, R12, R13 |
| 3 | TPD4E02B04DQA | aep:USON-10_2.5x1.0mm_P0.5mm_HAXED_MIDDLE | U3, U4, U5 |
| 2 | Conn_02x12_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical_SMD | J7, J8 |
| 1 | 0826-1X1T-GH-F | aep:BEL_0826-1X1T-GH-F | J2 |
| 1 | 100nF | Capacitors:0603 | C7 |
| 1 | AZ1117CH-3_3TRG1 | digikey-footprints:SOT-223 | U6 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical_SMD | J3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_SMD | J5 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x08_P1.27mm_Vertical_SMD | J1 |
| 1 | Conn_TE-M.2-0.5-67P | takigama:Conn_TE-M.2-0.5-67P-doublesided | U1 |
| 1 | Micro_SD_Card_Det | Connector_Card:microSD_HC_Molex_104031-0811 | J6 |
| 1 | NC | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | RPI4CM-aep | aep3:rpiCM4 | U2 |
| 1 | SM3ZS067U215 | MountingHole:MountingHole_2.2mm_M2_Pad_TopOnly | H1 |
| 1 | USB_C_Receptacle | aep:USB-C-DX07S | J4 |
| 1 | whatever 500V 0805 | Capacitor_SMD:C_0805_2012Metric | C8 |
Questions
How big is the Pibox PCB?
It measures 93 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pibox use?
44 parts, built around the TPD4E02B04DQAR, AZ1117CH-3.3TRG1-50, 0826-1X1T-GH-F and SM3ZS067U215AB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pibox KiCad files?
From the aep/pibox4 repository on GitHub, at the commit this page was made from: the board is pibox.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pibox design in my own project?
Its repository states no licence, so its author keeps all rights: ask aep before reusing the design.
Similar boards
- 2 layers61 × 35.6 mm
- 4 layers100 × 69.5 mm
- 2 layers93 × 50 mm
Ssh bridge for raspberrypi
hnz1102/ssh-serial-bridge
Firmware for the ESP32-S3 that bridges an SSH connection (over Wi-Fi) to UART and USB CDC serial ports. Written in Rust (esp-idf-hal / esp-idf-svc) with a C component (wolfSSH) for the SSH server.
37 parts3 - 2 layers100 × 100 mm
- 4 layers108 × 110 mm
- 4 layers90 × 40 mm
- 2 layers106 × 102.3 mm
