4 layers170 × 170 mm
4 layers90 × 40 mm
Pislice
aep/pislice- Size
- 90 × 40 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 54
- Pads
- 400
- Tracks, vias
- 972, 160
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Mar 2021
- Updated
- 10 Mar 2021
Overview
Pislice is an open-source printed circuit board by aep, from the aep/pislice repository on GitHub. It is a 4-layer board of 90 × 40 mm with 31 parts on 54 nets, routed with 972 tracks and 160 vias.
It is built around the AZ1117CH-3.3TRG1-50 and HX6096NL. Its parts include 11 resistors, 8 capacitors, 5 diodes, 4 ICs and 1 switch.
Main components
2
AZ1117CH-3.3TRG1-50
SOT-223-20℃~+125℃@(Tj) 1 1.3V@(800mA) 15V 1A 3.3V 6mA 70dB@(120Hz) Fixed Overheat protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
HX6096NL
SMD-24P,18.2x12.2mm-40℃~+85℃ 1.5kV 1CT:1CT、1CT:1CT 350uH Single port SMD-24P,18.2x12.2mm Pulse Transformers(LAN) ROHSPulse ElecPulse Transformers(LAN)
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 300R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R11 |
| 5 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5 |
| 4 | 75R | Resistor_SMD:R_0603_1608Metric | R8, R9, R16, R17 |
| 3 | 10uf | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C8 |
| 1 | 600R | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | AZ1117CH-3_3TRG1 | Package_TO_SOT_SMD:SOT-223 | U3 |
| 1 | Conn_TE-M.2-0.5-67P | aep:Conn_TE-M.2-0.5-67P-NVME | U1 |
| 1 | DNC | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | HX6096NL | aep:HX6096NL | K1 |
| 1 | PCIE-1X | Connector_PCBEdge:BUS_PCIexpress_x1 | U14 |
| 1 | RPI4CM-aep | aep3:rpiCM4 | U2 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm | JP1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
More from aep/pislice
1Similar boards
- 2 layers61 × 35.6 mm
- 2 layers93 × 50 mm
Ssh bridge for raspberrypi
hnz1102/ssh-serial-bridge
Firmware for the ESP32-S3 that bridges an SSH connection (over Wi-Fi) to UART and USB CDC serial ports. Written in Rust (esp-idf-hal / esp-idf-svc) with a C component (wolfSSH) for the SSH server.
37 parts3 - 2 layers93 × 85 mm
- 2 layers100 × 100 mm
- 4 layers43.4 × 18 mm
Easyduino Atmega Nano
Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards
31 parts755CERN-OHL-P-2.0 - 4 layers78 × 79 mm
- 4 layers31.6 × 26.6 mm
- 4 layers18.2 × 26.2 mm
Questions
How big is the Pislice PCB?
It measures 90 × 40 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Pislice use?
31 parts, built around the AZ1117CH-3.3TRG1-50 and HX6096NL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pislice KiCad files?
From the aep/pislice repository on GitHub, at the commit this page was made from: the board is pislice/pislice.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pislice design in my own project?
Its repository states no licence, so its author keeps all rights: ask aep before reusing the design.