

EFMPod
pcb projects
- Size
- 61 × 35.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 61
- Pads
- 200
- Tracks, vias
- 619, 63
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Jul 2018
- Updated
- 24 Apr 2020
Overview
EFMPod is an open-source printed circuit board by akowalczyk18, from the akowalczyk18/Kicad repository on GitHub. It is a 2-layer board of 61 × 35.6 mm with 52 parts on 61 nets, routed with 619 tracks and 63 vias.
It is built around the AZ1117CH-3.3TRG1-50 and UJ2-MBH-1-SMT-TR. Its parts include 19 capacitors, 14 resistors, 3 diodes, 3 connectors and 3 switches. It belongs with the Silicon Labs (EFR32, EFM) boards of this library.
Main components
2AZ1117CH-3.3TRG1-50
SOT-223-20℃~+125℃@(Tj) 1 1.3V@(800mA) 15V 1A 3.3V 6mA 70dB@(120Hz) Fixed Overheat protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUJ2-MBH-1-SMT-TR
SMD-20℃~+85℃ 1 1A 30V 5P Black Female Mini-B Surface Mount, Right Angle USB 2.0 SMD USB Connectors ROHSCUIUSB Connectors
README
README.mdKicad
pcb projects
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0 | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8, R9 |
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C6, C7, C8, C10 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C9 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R2, R10, R12, R14 |
| 4 | 22pF | Capacitor_SMD:C_0603_1608Metric | C16, C17, C18, C19 |
| 3 | 2.1V | digikey-footprints:0603 | D1, D2, D3 |
| 3 | SW_Push | Button_Switch_SMD:SW_SPST_EVQPE1 | SW1, SW2, SW3 |
| 2 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 10 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C14, C15 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric | R11, R13 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | AZ1117CH-3_3TRG1 | digikey-footprints:SOT-223 | U1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J1 |
| 1 | Conn_02x18_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical | J3 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | Crystal_GND3 | Crystal:Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal_1EP_style1 | Y2 |
| 1 | EFM32HG322F64 | Package_QFP:TQFP-48_7x7mm_P0.5mm | U2 |
| 1 | Ferrite_Bead | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | UJ2-MBH-1-SMT-TR | digikey-footprints:USB_Mini_B_Female_UJ2-MBH-1-SMT-TR | J2 |
The 47 most common of 52 parts.
More from akowalczyk18/Kicad
6- 2 layers44.5 × 16.3 mm

- 2 layers19.6 × 32.3 mm

- 2 layers25.4 × 48.3 mm

- 2 layers24.1 × 43.2 mm

- 2 layers19 × 44.5 mm

- 2 layers69.9 × 25.9 mm

Similar boards
- 2 layers93 × 50 mm

Ssh bridge for raspberrypi
hnz1102/ssh-serial-bridge
Firmware for the ESP32-S3 that bridges an SSH connection (over Wi-Fi) to UART and USB CDC serial ports. Written in Rust (esp-idf-hal / esp-idf-svc) with a C component (wolfSSH) for the SSH server.
37 parts3 - 2 layers93 × 85 mm

- 2 layers100 × 100 mm

- 4 layers90 × 40 mm

- 4 layers80 × 40 mm

- 2 layers100 × 100 mm

Reflow
windsorschmidt/reflow
Hardware and firmware sources for a 2-channel reflow (toaster) oven controller. KiCad schematic & PCB.
95 parts4MIT - 4 layers60 × 100 mm

- 4 layers55.5 × 36.1 mm

Questions
How big is the EFMPod PCB?
It measures 61 × 35.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EFMPod use?
52 parts, built around the AZ1117CH-3.3TRG1-50 and UJ2-MBH-1-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EFMPod KiCad files?
From the akowalczyk18/Kicad repository on GitHub, at the commit this page was made from: the board is EFMPod/EFMPod/EFMPod.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the EFMPod design in my own project?
Its repository states no licence, so its author keeps all rights: ask akowalczyk18 before reusing the design.