4 layers103 × 57 mm
4 layers236.1 × 156.9 mm
Impeller18
buglalis/degree- Size
- 236.1 × 156.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 764
- Nets
- 572
- Pads
- 2,515
- Tracks, vias
- 3,406, 1,114
- Pours
- 605
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Mar 2025
- Updated
- 4 Jun 2025
Overview
Impeller18 is an open-source printed circuit board by buglalis, from the buglalis/degree repository on GitHub. It is a 4-layer board of 236.1 × 156.9 mm with 764 parts on 572 nets, routed with 3,406 tracks and 1,114 vias.
It is built around the ISO1050DUB, G3VM-61VY2-TR and TLP291-4, with the HCPL-0600, HCPL-0630 and IP4220CZ6 among its other parts. Its parts include 351 resistors, 131 capacitors, 65 ICs, 64 transistors and 30 diodes.
Main components
12
ISO1050DUB
SOP-8-2.54mm-55℃~+105℃ 1 1Mbps 2500 3V~5.5V 4.75V~5.25V 50kV/us Bus fault detection and protection、Fail-safe SOP-8-2.54mm Isolated CAN Transceivers ROHSTexas InstrumentsIsolated CAN Transceivers
G3VM-61VY2-TR
SOP-4-40℃~+110℃ 1.27V 1000MΩ 100us 1Ω 3.75kV 500mA 600us 60V One set normally open: 2A (SPST - normally open) SOP-4 Solid State Relays (MOS Output) ROHSOmronSolid State Relays (MOS Output)
TLP291-4
SOIC16Quad Channel Optocoupler, Phototransistor OutputToshibaUncategorised
HCPL-0600
SOP-8-40℃~+85℃ 1 10Mbps 4.5V~5.5V 5kV/us DC SOP-8 Logic Output Optoisolators ROHSonsemiLogic Output OptoisolatorsHCPL-0630
SOT-ALL-8-40℃~+85℃ 1.75V 10Mbps 15kV/us 2 3.75kV 4.5V~5.5V 50mA 5mA 75ns 75ns DC Output enable control、Open-collector output SOT-ALL-8 Logic Output OptoisolatorsBroadcom LimitedLogic Output Optoisolators
IP4220CZ6
SOT-23-60.3pF 15V 300W@8/20us 5V 80nA ESD IEC 61000-4-5 Unidirectional SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)HY2213-BB3A
SOT-23-6-40℃~+85℃ 1 1.5V~8V 2uA 4.19V Balancing IC Lithium Battery Not supported SOT-23-6 Battery Management ROHSHYCON TechBattery Management
MCP2515-I/SO
SOIC-18-300mil-40℃~+85℃ 1Mbps 1uA 2.7V~5.5V 5mA CAN Controller SPI SOIC-18-300mil CAN Controllers ROHSMicrochip TechnologyCAN Controllers
LD1084V
TO-220-40℃~+125℃@(Tj) 1 1.25V~28.5V 1.5V@(5A) 10mA 30V 5A 72dB@(120Hz) Adjustable Positive Short Circuit Protection、Thermal shutdown TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LDL1117S33R
SOT-223-4-40℃~+125℃@(Tj) 1 1.2A 18V 3.3V 500uA 600mV@(1.2A) 60uVrms 87dB@(120Hz) Fixed Over Current Protection、Thermal Shutdown Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LDL1117S50R
SOT-223-40℃~+125℃ 1 1.2A 18V 250uA 350mV@(1.2A) 5V 60uVrms 87dB@(120Hz) Fixed Over Current Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
764| Qty | Value | Footprint | References |
|---|---|---|---|
| 130 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R12, R13, R104, R106, R107, R108, R114, R116, R117, R118, R124, R126, R127, R128, R134 +114 |
| 63 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +47 |
| 55 | 100n | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C100, C101, C104, C108, C111, C112, C113, C114, C117, C118, C120, C122, C123 +39 |
| 43 | 1M | Resistor_SMD:R_0603_1608Metric | R101, R102, R111, R112, R121, R122, R131, R132, R145, R149, R154, R159, R164, R170, R175, R180 +27 |
| 43 | 220 | Resistor_SMD:R_0603_1608Metric | R212, R215, R217, R218, R221, R223, R224, R227, R229, R230, R232, R234, R236, R238, R240, R242 +27 |
| 43 | 360 | Resistor_SMD:R_0603_1608Metric | R100, R109, R110, R119, R120, R129, R130, R139, R140, R143, R144, R148, R153, R158, R163, R168 +27 |
| 31 | 360k | Resistor_SMD:R_0603_1608Metric | R103, R105, R113, R115, R123, R125, R133, R135, R146, R150, R155, R160, R165, R171, R176, R181 +15 |
| 30 | TestPoint | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3, TP12, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP24, TP26, TP29, TP31, TP32 +14 |
| 21 | FYLS-0603BUGC | user_lib:LED_0603_1608Metric | D1, D2, D3, D11, D14, D15, D16, D17, D18, D19, D24, D25, D26, D27, D28, D29 +5 |
| 21 | G3VM61VY2 | user_lib:G3VM-61VY2TR | U34, U35, U36, U37, U38, U39, U40, U41, U42, U43, U44, U45, U46, U47, U48, U49 +5 |
| 18 | 10u | Capacitor_SMD:C_0603_1608Metric | C57, C58, C60, C74, C75, C87, C88, C90, C94, C95, C102, C103, C109, C110, C115, C116 +2 |
| 15 | 1u | Capacitor_SMD:C_0603_1608Metric | C17, C19, C27, C62, C64, C65, C68, C69, C77, C78, C81, C82, C91, C121, C129 |
| 10 | 1k | Resistor_SMD:R_0603_1608Metric | R21, R255, R256, R257, R258, R284, R285, R286, R287, R288 |
| 9 | 390 | Resistor_SMD:R_0603_1608Metric | R31, R299, R301, R303, R305, R307, R309, R311, R313 |
| 8 | 200k | Resistor_SMD:R_0603_1608Metric | R271, R272, R273, R274, R275, R276, R277, R278 |
| 8 | TLP291-4 | Package_SO:SOIC-16_4.55x10.3mm_P1.27mm | U18, U19, U20, U21, U26, U27, U69, U70 |
| 7 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C3, C29, C56, C59, C125, C128, C131 |
| 7 | B0505MT-1WR4 | user_lib:B0505MT-1WR4 | U13, U17, U24, U25, U28, U56, U63 |
| 7 | B3F1060 | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW4, SW5, SW6, SW7, SW11, SW13 |
| 7 | TLP291 | user_lib:TLP291 | U22, U23, U29, U30, U31, U32, U33 |
| 6 | 10u | Capacitor_SMD:C_1210_3225Metric | C31, C32, C33, C34, C35, C37 |
| 6 | 180 | Resistor_SMD:R_0603_1608Metric | R260, R261, R262, R290, R291, R292 |
| 6 | 470 | Resistor_SMD:R_0603_1608Metric | R10, R27, R28, R253, R282, R338 |
| 6 | 4u7 | Capacitor_SMD:C_1210_3225Metric | C42, C43, C44, C45, C46, C48 |
| 5 | 430451800 | user_lib:430451800 | J18, J19, J20, J27, J28 |
| 5 | 47u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C36, C47, C49, C105, C106 |
| 5 | FYLS-3528RGBC | user_lib:LED_RGB_promelec | D12, D13, D20, D21, D22 |
| 5 | M4 | user_lib:MountingHole_M4_protected | H1, H2, H3, H4, H13 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R17, R23, R347, R353 |
| 4 | 130 | Resistor_SMD:R_2512_6332Metric | R18, R19, R25, R26 |
| 4 | 22p | Capacitor_SMD:C_0603_1608Metric | C71, C72, C84, C85 |
| 4 | 430450400 | user_lib:430450400 | J6, J10, J13, J24 |
| 4 | 430450600 | user_lib:430450600 | J23, J25, J26, J30 |
| 4 | 4700p | Capacitor_SMD:C_1206_3216Metric | C26, C40, C41, C51 |
| 4 | HCPL-0600 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U57, U61, U64, U73 |
| 4 | ISO1050DUB | user_lib:ISO1050DUB | U10, U11, U14, U15 |
| 4 | M2.5 | MountingHole:MountingHole_2.7mm_M2.5_Pad_Via | H5, H6, H7, H8 |
| 4 | M4 | user_lib:MountingHole_M4_PCHSS4-22 | H9, H10, H11, H12 |
| 4 | MSS-12D16 | user_lib:MSS-12D16 | SW2, SW3, SW8, SW9 |
| 4 | PLS-2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J8, J9, J37 |
| 4 | PLS-3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J5, J11, J14 |
| 4 | PWR_REG | Resistor_SMD:R_0603_1608Metric | R6, R7, R11, R14 |
| 3 | 0 | Resistor_SMD:R_0603_1608Metric | R40, R44, R346 |
| 3 | 120 | Resistor_SMD:R_0603_1608Metric | R29, R39, R43 |
| 3 | 1393219-3 | user_lib:1393219-3 | K1, K2, K3 |
| 3 | DNP | Resistor_SMD:R_0603_1608Metric | R348, R351, R352 |
| 3 | HCPL-0630 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U59, U66, U68 |
| 3 | IP4220 | Package_TO_SOT_SMD:SOT-23-6 | U60, U62, U67 |
| 3 | TestPoint | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1, TP2, TP25 |
| 3 | X322516MLB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y3, Y4 |
| 2 | 10u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C39, C50 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric | C22, C24 |
| 2 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 430451600 | user_lib:430451600 | J29, J31 |
| 2 | 8p | Capacitor_SMD:C_0603_1608Metric | C21, C25 |
| 2 | B82721-K2222-U30 | user_lib:B82721-K2222-U30 | L1, L2 |
| 2 | B82790C0513N201 | user_lib:B82790C0513N201 | L3, L4 |
| 2 | Battery_Cell | user_lib:bat_18350 | BT2, BT3 |
| 2 | HY2213-BB3A | Package_TO_SOT_SMD:SOT-23-6 | U5, U7 |
| 2 | MCP2515-I/SO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U12, U16 |
| 2 | MF-LSMF300/24X-2 | user_lib:Fuse_2920_7451Metric | F1, F2 |
| 2 | PESD1CAN | Package_TO_SOT_SMD:SOT-23 | D8, D10 |
| 2 | PLS-5 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J12, J15 |
| 2 | ss54 | Diode_SMD:D_SMC | D4, D7 |
| 1 | 0m62 | Resistor_SMD:R_2512_6332Metric | R20 |
| 1 | 100u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C107 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C119 |
| 1 | 27n | Capacitor_SMD:C_0603_1608Metric | L5 |
| 1 | 430450415 | user_lib:430450415 | J34 |
| 1 | 430450800 | user_lib:430450800 | J22 |
| 1 | 430451000 | user_lib:430451000 | J21 |
| 1 | 68u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C38 |
| 1 | ADS1120-PW | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U65 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | BH1,27-10-G | user_lib:PinHeader_2x05_P1.27mm_Vertical_mod | J2 |
| 1 | DS1092-07-W6L | user_lib:DS1092-07-W6L | BT1 |
| 1 | KSE-7K32768KDY2400A3 | user_lib:KSE-7K32768KDY2400A3 | Y2 |
| 1 | LD1084V | user_lib:TO-220-3_Vertical_radiator | U8 |
| 1 | LDL1117S33R | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LDL1117S50R | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U74 |
The 744 most common of 764 parts.
Questions
How big is the Impeller18 PCB?
It measures 236.1 × 156.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Impeller18 use?
764 parts, built around the ISO1050DUB, G3VM-61VY2-TR, TLP291-4 and HCPL-0600. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Impeller18 KiCad files?
From the buglalis/degree repository on GitHub, at the commit this page was made from: the board is KiCad/Examples/impeller18/impeller18.kicad_pcb and its schematic KiCad/BMS/BMS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Impeller18 design in my own project?
Its repository states no licence, so its author keeps all rights: ask buglalis before reusing the design.
More from buglalis/degree
1Similar boards
- 4 layers120 × 350 mm
- 4 layers
- 2 layers80 × 105 mm
- 2 layers81 × 60 mm
Psu
kajusK/Pneumobil
Control and telemetry system for BUT Falcon pneumobil for Aventics Pneumobil competition
108 parts - 2 layers111.7 × 48.5 mm
F3 peripheral boards
formulaslug/fs-3-schematics
Electrical Design Repository for fs-3 schematics and PCBs
55 parts5 - 2 layers69 × 58.4 mm
DSBClone
Rolel/DSBClone
A replacement PCB for the SEGA Digital Sound Boardscused on several SEGA arcade games
31 parts13GPL-3.0 - 2 layers166 × 70 mm
Prototype
SteveCooling/MidiKeys
Will be a complete board with decoders for multiplexed sampling of analog sources and up to 61-key keybeds
75 parts8MIT - 2 layers121.5 × 136.5 mm
