2 layers160 × 100 mm
CLOCK
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
135 partsMIT
2 layers160 × 100 mm
WAVEFORM PROCESSOR
Desval27/FormantKOKnock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
- Size
- 160 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 52
- Pads
- 141
- Tracks, vias
- 277, 8
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 May 2026
- Updated
- 28 Aug 2026
Overview
WAVEFORM PROCESSOR is an open-source printed circuit board by Desval27, from the Desval27/FormantKO repository on GitHub, published under the MIT licence. It is a 2-layer board of 160 × 100 mm with 52 parts on 52 nets, routed with 277 tracks and 8 vias.
It is built around the ES1. Its parts include 31 connectors, 11 resistors, 5 capacitors, 3 ICs and 1 diode. It belongs with the audio and music boards of this library.
Main components
1README
MFOS/panels/ANALOG/README.mdParts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 56k | FormantKO:R_Axial_Horizontal_P500mil | R1, R2, R8, R9 |
| 4 | Mono_Jack | FormantKO:PanelConnector_1x02 | J2, J3, J4, J5 |
| 3 | 560n | FormantKO:C_Rect_P300-400mil | C1, C2, C3 |
| 3 | µA741C | FormantKO:DIP-8N | IC1, IC2, IC3 |
| 2 | 100k | FormantKO:PanelConnector_1x03 | P1, P2 |
| 2 | 10µ | FormantKO:CP_Axial_P600mil | C4, C5 |
| 2 | 120k | FormantKO:R_Axial_Horizontal_P500mil | R3, R7 |
| 2 | 50k | FormantKO:PanelConnector_1x03 | P3, P4 |
| 2 | GND | FormantKO:Wire_1x01_D40mil_OD80mil | J7, J8 |
| 1 | 100k | FormantKO:R_Axial_Horizontal_P500mil | R6 |
| 1 | 10k | FormantKO:PanelConnector_1x03 | P5 |
| 1 | 470k | FormantKO:R_Axial_Horizontal_P500mil | R5 |
| 1 | 470Ω | FormantKO:R_Axial_Horizontal_P500mil | R11 |
| 1 | 5k6 | FormantKO:R_Axial_Horizontal_P500mil | R4 |
| 1 | 82k | FormantKO:R_Axial_Horizontal_P500mil | R10 |
| 1 | CM | FormantKO:Wire_1x01_D40mil_OD80mil | J26 |
| 1 | Card Connector | FormantKO:CardConnector | J1 |
| 1 | CardBracket | FormantKO:CardBracket | MH1 |
| 1 | DUS | FormantKO:DO-35_P400mil | D1 |
| 1 | ES1 | FormantKO:Wire_1x01_D40mil_OD80mil | J12 |
| 1 | ES2 | FormantKO:Wire_1x01_D40mil_OD80mil | J16 |
| 1 | OUT | FormantKO:Wire_1x01_D40mil_OD80mil | J6 |
| 1 | P1-1 | FormantKO:Wire_1x01_D40mil_OD80mil | J20 |
| 1 | P1-2 | FormantKO:Wire_1x01_D40mil_OD80mil | J21 |
| 1 | P1-3 | FormantKO:Wire_1x01_D40mil_OD80mil | J22 |
| 1 | P2-1 | FormantKO:Wire_1x01_D40mil_OD80mil | J25 |
| 1 | P2-2 | FormantKO:Wire_1x01_D40mil_OD80mil | J24 |
| 1 | P2-3 | FormantKO:Wire_1x01_D40mil_OD80mil | J23 |
| 1 | P3-1 | FormantKO:Wire_1x01_D40mil_OD80mil | J13 |
| 1 | P3-2 | FormantKO:Wire_1x01_D40mil_OD80mil | J14 |
| 1 | P3-3 | FormantKO:Wire_1x01_D40mil_OD80mil | J15 |
| 1 | P4-1 | FormantKO:Wire_1x01_D40mil_OD80mil | J17 |
| 1 | P4-2 | FormantKO:Wire_1x01_D40mil_OD80mil | J18 |
| 1 | P4-3 | FormantKO:Wire_1x01_D40mil_OD80mil | J19 |
| 1 | P5-1 | FormantKO:Wire_1x01_D40mil_OD80mil | J9 |
| 1 | P5-2 | FormantKO:Wire_1x01_D40mil_OD80mil | J11 |
| 1 | P5-3 | FormantKO:Wire_1x01_D40mil_OD80mil | J10 |
Questions
How big is the WAVEFORM PROCESSOR PCB?
It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WAVEFORM PROCESSOR use?
52 parts, built around the ES1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WAVEFORM PROCESSOR KiCad files?
From the Desval27/FormantKO repository on GitHub, at the commit this page was made from: the board is modules/WAVEFORM_PROCESSOR/WAVEFORM_PROCESSOR.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the WAVEFORM PROCESSOR design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Desval27/FormantKO
12- 2 layers160 × 233.4 mm
VCO
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
129 partsMIT - 2 layers160 × 233.4 mm
VCF 24
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
112 partsMIT - 2 layers160 × 100 mm
DELAYED MOD
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
101 partsMIT - 2 layers160 × 100 mm
ANALOG
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
96 partsMIT - 2 layers160 × 100 mm
LFOs
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
94 partsMIT - 2 layers160 × 233.4 mm
RFM
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
93 partsMIT - 2 layers160 × 100 mm
VC LFOs
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
92 partsMIT - 2 layers160 × 100 mm
COM
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
85 partsMIT - 2 layers160 × 100 mm
ADSR
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
82 partsMIT - 2 layers160 × 100 mm
PHASE SHIFTER
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
79 partsMIT - 2 layers160 × 100 mm
EXPANDER
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
77 partsMIT
Similar boards
- 2 layers133 × 106 mm
8-channel relay
akashh218/ESP32-8-Channel-Smart-Switch-PCB
ESP32-based 8-channel smart switch PCB for wireless control of multiple electrical loads, featuring relay interfaces and a compact PCB design.
86 parts - 2 layers44.5 × 37.9 mm
PetPull v3
Fremen72/MiniPetPull
Recycler PET plastic bottles into filament for 3D printer
14 partsGPL-3.0 - 2 layers99.1 × 68.9 mm
- 2 layers41.4 × 47.5 mm
U2f zero panel
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
52 parts2.4k - 2 layers136 × 130 mm
Lora nodemcu
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
52 parts1.1k - 2 layers69 × 53.8 mm
TUSS4470 shield
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
52 parts530 - 2 layers52.5 × 36.6 mm
ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453 - 2 layers105.2 × 42.4 mm
