
CLOCK
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
RFM is an open-source printed circuit board by Desval27, from the Desval27/FormantKO repository on GitHub, published under the MIT licence. It is a 2-layer board of 160 × 233.4 mm with 93 parts on 98 nets, routed with 812 tracks and 29 vias.
Its parts include 52 resistors, 19 capacitors, 13 connectors, 5 ICs and 1 switch. It belongs with the audio and music boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10k | FormantKO:R_Axial_Horizontal | R3, R8, R12, R15, R18, R23, R27, R30, R33, R38, R39, R40, R42, R45 |
| 10 | 100n | FormantKO:C_Disc_300_400 | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19 |
| 10 | 22k | FormantKO:R_Axial_Horizontal | R4, R6, R7, R17, R19, R21, R32, R34, R36, R47 |
| 7 | 15k | FormantKO:R_Axial_Horizontal | R5, R9, R10, R20, R24, R25, R35 |
| 6 | 12k | FormantKO:R_Axial_Horizontal | R13, R16, R28, R31, R43, R46 |
| 6 | 220R | FormantKO:R_Axial_Horizontal | R11, R14, R26, R29, R41, R44 |
| 6 | 6n8 | FormantKO:C_Disc_300_400 | C2, C3, C4, C5, C6, C7 |
| 5 | 100k | FormantKO:R_Axial_Horizontal | R1, R2, R48, R51, R52 |
| 4 | 47k | FormantKO:Panel_Connector_1x03 | P2, P5, P8, P10 |
| 3 | 10k | FormantKO:Panel_Connector_1x06 | P3, P6, P9 |
| 3 | 47k | FormantKO:Panel_Connector_1x06 | P1, P4, P7 |
| 3 | TL074 | FormantKO:DIP-14 | IC2, IC3, IC4 |
| 2 | 1k | FormantKO:R_Axial_Horizontal | R22, R37 |
| 2 | 1µ | FormantKO:C_Rect_400_600 | C8, C9 |
| 2 | 470R | FormantKO:R_Axial_Horizontal | R49, R50 |
| 2 | CardBracket | FormantKO:Card_Bracket | MH1, MH2 |
| 1 | 680n | FormantKO:C_Disc_300_400 | C1 |
| 1 | BYPASS | FormantKO:Panel_Connector_1x03 | S1 |
| 1 | Card_Connector | FormantKO:Card_Connector | J1 |
| 1 | ES | FormantKO:Panel_Connector_1x02 | J2 |
| 1 | IS SELECT | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J3 |
| 1 | LF356 | FormantKO:DIP-8 | IC1 |
| 1 | LF357 | FormantKO:DIP-8 | IC5 |
The 92 most common of 93 parts.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware


voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.



Musab-Hassan/aurora_keyboard
A gorgeous split wireless ortholinear keyboard that you can build yourself.

profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
It measures 160 × 233.4 mm and has 2 copper layers, 1.6 mm thick.
93 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Desval27/FormantKO repository on GitHub, at the commit this page was made from: the board is modules/RFM/RFM.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).