
CLOCK
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
PHASE SHIFTER is an open-source printed circuit board by Desval27, from the Desval27/FormantKO repository on GitHub, published under the MIT licence. It is a 2-layer board of 160 × 100 mm with 79 parts on 73 nets, routed with 449 tracks and 18 vias.
It is built around the LM324. Its parts include 38 resistors, 13 connectors, 11 capacitors, 4 ICs and 2 diodes. It belongs with the audio and music boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 22k | FormantKO:R_Axial_Horizontal | R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R21, R22 |
| 8 | 100k | FormantKO:R_Axial_Horizontal | R1, R2, R15, R16, R17, R18, R19, R20 |
| 6 | N-FET | FormantKO:TO-92 | T1, T2, T3, T4, T5, T6 |
| 2 | 10k | FormantKO:PanelConnector_1x03 | P3, P4 |
| 2 | 10k | FormantKO:R_Axial_Horizontal | R23, R35 |
| 2 | 10µ | FormantKO:CP_Axial_600 | C10, C11 |
| 2 | 12V | FormantKO:DUZ | D1, D2 |
| 2 | 150R | FormantKO:R_Axial_Horizontal | R37, R38 |
| 2 | 1M | FormantKO:R_Axial_Horizontal | R27, R29 |
| 2 | 33k | FormantKO:R_Axial_Horizontal | R24, R25 |
| 2 | 47k | FormantKO:R_Axial_Horizontal | R32, R34 |
| 2 | 4k7 | FormantKO:R_Axial_Horizontal | R28, R36 |
| 2 | 4µ7 | Capacitor_THT:CP_Radial_Tantal_D5.0mm_P5.00mm | C2, C9 |
| 2 | 50k | FormantKO:Potentiometer_Trimmer | P2, P5 |
| 2 | LM324 | FormantKO:DIP-14 | IC1, IC2 |
| 2 | OpAmp | FormantKO:DIP-8 | IC3, IC4 |
| 1 | + | FormantKO:Wire_1x01_General | J4 |
| 1 | - | FormantKO:Wire_1x01_General | J5 |
| 1 | 0 | FormantKO:Wire_1x01_General | J6 |
| 1 | 100n | FormantKO:C_Rect_300_400 | C7 |
| 1 | 12k | FormantKO:R_Axial_Horizontal | R30 |
| 1 | 150n | FormantKO:C_Rect_300_400 | C6 |
| 1 | 1µ | FormantKO:C_Rect_300_400_500_600 | C3 |
| 1 | 330k | FormantKO:R_Axial_Horizontal | R26 |
| 1 | 330n | FormantKO:C_Rect_300_400 | C5 |
| 1 | 3k9 | FormantKO:R_Axial_Horizontal | R31 |
| 1 | 470k | FormantKO:R_Axial_Horizontal | R33 |
| 1 | 470k | FormantKO:PanelConnector_1x03 | P1 |
| 1 | 470n | FormantKO:C_Rect_300_400 | C4 |
| 1 | 470n | FormantKO:C_Rect | C1 |
| 1 | 47n | FormantKO:C_Rect_300_400 | C8 |
| 1 | BYPASS | FormantKO:PanelConnector_1x03 | S1 |
| 1 | CardBracket | FormantKO:CardBracket | MH1 |
| 1 | Card_Connector | FormantKO:CardConnector | J1 |
| 1 | ES | FormantKO:PanelConnector_1x03 | J2 |
| 1 | IS SELECT | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J7 |
| 1 | MODE | FormantKO:PanelConnector_1x03 | S2 |
| 1 | OS | FormantKO:PanelConnector_1x02 | J3 |
| 1 | OS SELECT | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J8 |
| 1 | SQUARE | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP1 |
| 1 | TRIANGLE | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP2 |

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!




corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.

CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support

schlae/snark-barker-mca
A Sound Blaster compatible sound card for Micro Channel bus computers
It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
79 parts, built around the LM324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Desval27/FormantKO repository on GitHub, at the commit this page was made from: the board is modules/PHASE_SHIFTER/PHASE_SHIFTER.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).