
CLOCK
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
LFOs is an open-source printed circuit board by Desval27, from the Desval27/FormantKO repository on GitHub, published under the MIT licence. It is a 2-layer board of 160 × 100 mm with 94 parts on 100 nets, routed with 606 tracks and 17 vias.
It is built around the LM324 and BC548C. Its parts include 51 resistors, 22 connectors, 6 ICs, 6 diodes and 5 capacitors. It belongs with the audio and music boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100k | FormantKO:R_Axial_Horizontal | R3, R4, R6, R8, R9, R21, R22, R24, R30, R31, R42, R43, R44, R45, R46 |
| 9 | 1k | FormantKO:R_Axial_Horizontal | R7, R12, R13, R28, R29, R34, R47, R48, R51 |
| 6 | 470R | FormantKO:R_Axial_Horizontal | R11, R15, R33, R35, R39, R50 |
| 6 | 68k | FormantKO:R_Axial_Horizontal | R1, R2, R19, R20, R37, R38 |
| 4 | 10k | FormantKO:Potentiometer_Trimmer_PinSwap | P4, P6, P7, P11 |
| 3 | 100k | FormantKO:Panel_Connector_1x03 | P1, P8, P9 |
| 3 | 10k | FormantKO:Potentiometer_Trimmer | P2, P5, P10 |
| 3 | 1µ | FormantKO:C_Rect_400_600 | C1, C2, C5 |
| 3 | 22k | FormantKO:R_Axial_Horizontal | R14, R18, R40 |
| 3 | 3k9 | FormantKO:R_Axial_Horizontal | R10, R32, R49 |
| 3 | 47k | FormantKO:R_Axial_Horizontal | R5, R23, R41 |
| 3 | BC548C | FormantKO:TO-92 | T1, T2, T3 |
| 3 | DUS | FormantKO:DUS | D1, D3, D5 |
| 3 | Generic_OpAmp_Single | FormantKO:DIP-8 | IC1, IC3, IC6 |
| 3 | LM324 | FormantKO:DIP-14 | IC2, IC4, IC5 |
| 2 | 100µ | FormantKO:CP_Axial_800 | C3, C4 |
| 2 | 10k | FormantKO:R_Axial_Horizontal | R25, R27 |
| 2 | 1k | FormantKO:Potentiometer_Trimmer | P3, P12 |
| 2 | 47R | FormantKO:R_Axial_Horizontal | R16, R36 |
| 2 | LFO1 LED | FormantKO:PanelConnector_1x02 | D2, D6 |
| 1 | 39R | FormantKO:R_Axial_Horizontal | R17 |
| 1 | 4k7 | FormantKO:R_Axial_Horizontal | R26 |
| 1 | CardBracket | FormantKO:CardBracket | MH1 |
| 1 | CardConnector | FormantKO:CardConnector | J1 |
| 1 | LFO1 RMP | FormantKO:PanelConnector_1x02 | J2 |
| 1 | LFO1 SQR | FormantKO:PanelConnector_1x02 | J3 |
| 1 | LFO1 TRI | FormantKO:PanelConnector_1x02 | J4 |
| 1 | LFO2 RMP | FormantKO:PanelConnector_1x02 | J5 |
| 1 | LFO2 SQR | FormantKO:PanelConnector_1x02 | J6 |
| 1 | LFO2 TRI | FormantKO:PanelConnector_1x02 | J7 |
| 1 | LFO3 LED | FormantKO:PanelConnector_1x02 | D4 |
| 1 | LFO3 RMP | FormantKO:PanelConnector_1x02 | J9 |
| 1 | LFO3 SAW | FormantKO:PanelConnector_1x02 | J8 |
| 1 | LFO3 TRI | FormantKO:PanelConnector_1x02 | J10 |

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.




pozsarzs/mm8d-hw
Hardware of MM8D central controlling and remote monitoring device for growing house


phastmike/neutec-repeater-hardware
Contains KiCad files for the Neutec Repeater Project. Firmware is on a different repository

pozsarzs/zacchaeus
8-bit microcomputer built from commercially available and home-built components

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
94 parts, built around the LM324 and BC548C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Desval27/FormantKO repository on GitHub, at the commit this page was made from: the board is modules/LFOs/LFOs.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).