

basic +-12v dual power supply from 12vac
- Size
- 69.6 × 99.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 35
- Pads
- 121
- Tracks, vias
- 265, 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Dec 2023
- Updated
- 9 Apr 2026
Overview
Vca is an open-source printed circuit board by anandijain, from the anandijain/synth.kicad repository on GitHub. It is a 2-layer board of 69.6 × 99.6 mm with 52 parts on 35 nets, routed with 265 tracks and 2 vias.
It is built around the BC548C. Its parts include 32 resistors, 9 connectors, 4 transistors and 1 IC.
Main components
1README
psu/README.mdpsu.kicad
basic +-12v dual power supply from 12vac
designed to be done diy with ferric chloride (thick traces)
Parts
- big caps https://www.amazon.com/dp/B08KTLQLVK
- -12v regulator https://www.digikey.com/en/products/detail/stmicroelectronics/L7912CV/585997
- +12v regulator https://www.digikey.com/en/products/detail/stmicroelectronics/L7812CV/585973
- diodes https://www.amazon.com/gp/product/B07Q5FZR7X
- small caps https://www.amazon.com/gp/product/B094HRK8QX/
- copper boards https://www.amazon.com/dp/B01MCVLDDZ
00:00:00 intro/materials 00:07:30 buffing board 00:10:00 tracing 00:26:30 etching 00:42:30 rinse 01:01:00 how to not dremel 01:22:00 drilling 01:39:55 soldering
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100k | my_library:my_tht_r | R1, R3, R5, R13, R14, R15, R17, R20, R21, R27, R30, R31 |
| 6 | 10k | my_library:my_tht_r | R7, R10, R11, R24, R28, R29 |
| 6 | 20k | my_library:my_tht_r | R4, R8, R9, R18, R23, R25 |
| 6 | Conn_01x02_Socket | my_library:my_really_cool_2pin | J2, J3, J4, J6, J7, J9 |
| 4 | 100 | my_library:my_tht_r | R2, R12, R19, R26 |
| 4 | BC548C | my_library:my_bc548 | Q1, Q2, Q3, Q4 |
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | Conn_01x03_Socket | my_library:my_really_cool_3pin | J1, J5, J8 |
| 2 | 100k | my_library:my_trimmer | RV1, RV2 |
| 2 | 1k | my_library:my_tht_r | R16, R32 |
| 2 | 82k | my_library:my_tht_r | R6, R22 |
| 1 | TL074 | my_library:my_dip14_no_f_pads | U1 |
More from anandijain/synth.kicad
3Similar boards
- 2 layers215 × 100 mm

- 2 layers242.5 × 102.5 mm

- 2 layers238.5 × 59.7 mm

Mm8d
pozsarzs/mm8d-hw
Hardware of MM8D central controlling and remote monitoring device for growing house
94 parts - 2 layers160 × 100 mm

LFOs
Desval27/FormantKO
Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.
94 partsMIT - 2 layers50 × 40 mm

- 2 layers95 × 75 mm

RepeaterController
phastmike/neutec-repeater-hardware
Contains KiCad files for the Neutec Repeater Project. Firmware is on a different repository
58 parts - 2 layers238.5 × 59.7 mm

Pioi
pozsarzs/zacchaeus
8-bit microcomputer built from commercially available and home-built components
83 partsEUPL-1.2 - 2 layers41.4 × 47.5 mm

U2f zero panel
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
52 parts2.4k
Questions
How big is the Vca PCB?
It measures 69.6 × 99.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Vca use?
52 parts, built around the BC548C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vca KiCad files?
From the anandijain/synth.kicad repository on GitHub, at the commit this page was made from: the board is vca/vca.kicad_pcb and its schematic env/env.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vca design in my own project?
Its repository states no licence, so its author keeps all rights: ask anandijain before reusing the design.

