Skip to the content
2 layers160 × 100 mmADSR, the printed circuit board in 3D

Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Size
160 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
82
Nets
75
Pads
232
Tracks, vias
416, 12
Pours
25
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
13 May 2026
Updated
28 Aug 2026

Overview

ADSR is an open-source printed circuit board by Desval27, from the Desval27/FormantKO repository on GitHub, published under the MIT licence. It is a 2-layer board of 160 × 100 mm with 82 parts on 75 nets, routed with 416 tracks and 12 vias.

It is built around the BC108C, S1A and S1B, with the S1M among its other parts. Its parts include 31 connectors, 27 resistors, 7 diodes, 5 ICs and 4 capacitors. It belongs with the audio and music boards of this library.

Main components

4

README

MFOS/panels/ANALOG/README.md

ANALOG

CV-16

Format: 6U

Status

⚠️ Incomplete⚠️

Documents

Gerber to Order

⚠️ Untested⚠️

Images

Rendered Panel Front

Rendered Panel Back

Parts

82
QtyValueFootprintReferences
6BC108CFormantKO:TO-18_WideT1, T2, T3, T4, T5, T6
5100kFormantKO:R_Axial_HorizontalR4, R6, R8, R16, R18
51N4148FormantKO:DO-35_400milD1, D2, D3, D4, D5
5µA741CFormantKO:DIP-8IC1, IC2, IC3, IC4, IC5
410kFormantKO:R_Axial_HorizontalR1, R9, R23, R24
433kFormantKO:R_Axial_HorizontalR5, R10, R11, R22
31MFormantKO:PanelConnector_1x03P1, P2, P3
3470RFormantKO:R_Axial_HorizontalR12, R26, R27
21kFormantKO:R_Axial_HorizontalR13, R21
227kFormantKO:R_Axial_HorizontalR14, R20
24k7FormantKO:R_Axial_HorizontalR2, R25
25k6FormantKO:R_Axial_HorizontalR3, R7
26k8FormantKO:R_Axial_HorizontalR15, R19
2GNDFormantKO:Wire_1x01_GeneralJ7, J26
110kFormantKO:PanelConnector_1x03_PinSwapP4
110nFormantKO:C_RectC1
110µFormantKO:CP_Axial_700-900milC4
110µFormantKO:CP_Axial_500_600_700C2
110µFormantKO:CP_Axial_700-900mil_PinSwapC3
11N4148FormantKO:DO-35_500milD7
1220RFormantKO:R_Axial_HorizontalR17
125kFormantKO:Potentiometer_Trimmer_PinSwapP5
1CardBracketFormantKO:CardBracketMH1
1CardConnectorFormantKO:CardConnectorJ1
1D6aFormantKO:Wire_1x01_GeneralJ23
1D6kFormantKO:Wire_1x01_GeneralJ24
1ENV INDFormantKO:PanelConnector_1x02_PinSwapD6
1ENV SELECTConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ2
1EOSFormantKO:Wire_1x01_GeneralJ25
1EOSFormantKO:PanelConnector_1x02J4
1EXT GATEFormantKO:PanelConnector_1x03J5
1GATE SELECTConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ3
1MODEFormantKO:PanelConnector_1x03_PinSwapS1
1NO EXT GATEFormantKO:Jumper_1x02J6
1P1.1FormantKO:Wire_1x01_GeneralJ8
1P1.2FormantKO:Wire_1x01_GeneralJ10
1P1.3FormantKO:Wire_1x01_GeneralJ9
1P2.1FormantKO:Wire_1x01_GeneralJ13
1P2.2FormantKO:Wire_1x01_GeneralJ12
1P2.3FormantKO:Wire_1x01_GeneralJ11
1P3.1FormantKO:Wire_1x01_GeneralJ14
1P3.2FormantKO:Wire_1x01_GeneralJ16
1P3.3FormantKO:Wire_1x01_GeneralJ15
1P4.1FormantKO:Wire_1x01_GeneralJ17
1P4.2FormantKO:Wire_1x01_GeneralJ18
1P4.3FormantKO:Wire_1x01_GeneralJ19
1S1aFormantKO:Wire_1x01_GeneralJ20
1S1bFormantKO:Wire_1x01_GeneralJ21
1S1mFormantKO:Wire_1x01_GeneralJ22

More from Desval27/FormantKO

12
  • 2 layers160 × 100 mmCLOCK, the printed circuit board in 3D

    CLOCK

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    135 partsMIT
  • 2 layers160 × 233.4 mmVCO, the printed circuit board in 3D

    VCO

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    129 partsMIT
  • 2 layers160 × 233.4 mmVCF 24, the printed circuit board in 3D

    VCF 24

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    112 partsMIT
  • 2 layers160 × 100 mmDELAYED MOD, the printed circuit board in 3D

    DELAYED MOD

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    101 partsMIT
  • 2 layers160 × 100 mmANALOG, the printed circuit board in 3D

    ANALOG

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    96 partsMIT
  • 2 layers160 × 100 mmLFOs, the printed circuit board in 3D

    LFOs

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    94 partsMIT
  • 2 layers160 × 233.4 mmRFM, the printed circuit board in 3D

    RFM

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    93 partsMIT
  • 2 layers160 × 100 mmVC LFOs, the printed circuit board in 3D

    VC LFOs

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    92 partsMIT
  • 2 layers160 × 100 mmCOM, the printed circuit board in 3D

    COM

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    85 partsMIT
  • 2 layers160 × 100 mmPHASE SHIFTER, the printed circuit board in 3D

    PHASE SHIFTER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    79 partsMIT
  • 2 layers160 × 100 mmEXPANDER, the printed circuit board in 3D

    EXPANDER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    77 partsMIT
  • 2 layers160 × 100 mmADSR CONTROLLER, the printed circuit board in 3D

    ADSR CONTROLLER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    77 partsMIT

Similar boards

  • 2 layers98 × 68 mmRpi1-adapter, the printed circuit board in 3D

    Rpi1-adapter

    noisebridge/rfid-access-control

    Little system to handle RFID access control at Noisebridge

    53 parts47GPL-2.0
  • 2 layers154.5 × 73 mmPromprog2, the printed circuit board in 3D

    Promprog2

    Lazarus-L-o-n-g/PromProg

    PromProg is a versatile PROM Programmer for three basic PROM chips - 74188, 74S287 and 74S571. Device is based on ATmega16 microcontroller, data for programming can be downloaded from master computer from your preferred…

    95 parts8
  • 2 layers100 × 200 mmCharger2, the printed circuit board in 3D

    Charger2

    alangecker/yacharger

    yet another 18650 charger

    169 parts1
  • 2 layers102.4 × 77.4 mmScheda PSE, the printed circuit board in 3D

    Scheda PSE

    Eduzyolo/PSE_project

    This is the official repo for the PSE project

    176 parts1
  • 2 layers134.6 × 109.2 mmPacMan, the printed circuit board in 3D

    PacMan

    Lafayette-FSAE/PacMan

    A KiCad Schematic for PacMan, a Accumulator Management Board for the Lafayette FSAE Accumulator Management System

    169 parts1
  • 2 layers121.9 × 83.8 mmSegMan, the printed circuit board in 3D

    SegMan

    Lafayette-FSAE/SegMan

    A KiCad Schematic for SegMan, A Segment Management Board for the Lafayette FSAE Accumulator Management System

    60 parts
  • 2 layers38.2 × 45.5 mmConti activate plug, the printed circuit board in 3D

    Conti activate plug

    NerdyProjects/conti_bat_trigger

    Die Conti-Akkus aus dem Finger-Forum liegen immer noch rum, eine Platine muss her, damit es einfach wird.

    58 parts

Questions

How big is the ADSR PCB?

It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ADSR use?

82 parts, built around the BC108C, S1A, S1B and S1M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ADSR KiCad files?

From the Desval27/FormantKO repository on GitHub, at the commit this page was made from: the board is modules/ADSR/ADSR.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ADSR design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).