Skip to the content
2 layers160 × 100 mmANALOG, the printed circuit board in 3D

Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

Size
160 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
96
Nets
116
Pads
258
Tracks, vias
404, 3
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
13 May 2026
Updated
28 Aug 2026

Overview

ANALOG is an open-source printed circuit board by Desval27, from the Desval27/FormantKO repository on GitHub, published under the MIT licence. It is a 2-layer board of 160 × 100 mm with 96 parts on 116 nets, routed with 404 tracks and 3 vias.

It is built around the TL082, TL084 and CD4067. Its parts include 44 connectors, 41 resistors, 6 capacitors and 3 ICs. It belongs with the audio and music boards of this library.

Main components

3

README

MFOS/panels/ANALOG/README.md

ANALOG

CV-16

Format: 6U

Status

⚠️ Incomplete⚠️

Documents

Gerber to Order

⚠️ Untested⚠️

Images

Rendered Panel Front

Rendered Panel Back

Parts

96
QtyValueFootprintReferences
18100kFormantKO:R_Axial_Horizontal_400R5, R6, R10, R12, R17, R23, R26, R31, R33, R36, R41, R45, R47, R52, R58, R64 +2
162MFormantKO:R_Axial_Horizontal_400R9, R14, R20, R21, R27, R29, R37, R39, R43, R49, R55, R56, R60, R61, R68, R70
16CFormantKO:Wire_1x01_GeneralJ13, J15, J17, J19, J21, J23, J25, J27, J29, J31, J33, J35, J37, J39, J41, J43
16FFormantKO:Wire_1x01_GeneralJ14, J16, J18, J20, J22, J24, J26, J28, J30, J32, J34, J36, J38, J40, J42, J44
310kFormantKO:R_Axial_Horizontal_400R1, R72, R74
2100nFormantKO:C_Rect_200C1, C4
2100µCapacitor_THT:CP_Radial_D8.0mm_P5.00mmC2, C3
2470pFormantKO:C_Rect_200C5, C6
247kFormantKO:R_Axial_Horizontal_400R2, R3
2VSRCFormantKO:Wire_1x01_GeneralJ11, J12
1200kFormantKO:R_Axial_Horizontal_400R25
122RFormantKO:R_Axial_Horizontal_400R75
1CD4067FormantKO:DIP-24WU2
1CV1FormantKO:Wire_1x01_GeneralJ6
1CV2FormantKO:Wire_1x01_GeneralJ7
1CV3FormantKO:Wire_1x01_GeneralJ8
1CardBracketFormantKO:CardBracketMH1
1LM4040LP-2.5Package_TO_SOT_THT:TO-92_Inline_WideVS1
1QAFormantKO:Wire_2x01_GeneralJ2
1QBFormantKO:Wire_2x01_GeneralJ3
1QCFormantKO:Wire_2x01_GeneralJ4
1QDFormantKO:Wire_2x01_GeneralJ5
1R51-1&2FormantKO:Wire_1x01_GeneralJ9
1R51-3FormantKO:Wire_1x01_GeneralJ10
1Sequencer Bus ConnectorFormantKO:BusConnector_Full_Male_HorizontalJ1
1TL082FormantKO:DIP-8U3
1TL084FormantKO:DIP-14U1

More from Desval27/FormantKO

12
  • 2 layers160 × 100 mmCLOCK, the printed circuit board in 3D

    CLOCK

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    135 partsMIT
  • 2 layers160 × 233.4 mmVCO, the printed circuit board in 3D

    VCO

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    129 partsMIT
  • 2 layers160 × 233.4 mmVCF 24, the printed circuit board in 3D

    VCF 24

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    112 partsMIT
  • 2 layers160 × 100 mmDELAYED MOD, the printed circuit board in 3D

    DELAYED MOD

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    101 partsMIT
  • 2 layers160 × 100 mmLFOs, the printed circuit board in 3D

    LFOs

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    94 partsMIT
  • 2 layers160 × 233.4 mmRFM, the printed circuit board in 3D

    RFM

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    93 partsMIT
  • 2 layers160 × 100 mmVC LFOs, the printed circuit board in 3D

    VC LFOs

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    92 partsMIT
  • 2 layers160 × 100 mmCOM, the printed circuit board in 3D

    COM

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    85 partsMIT
  • 2 layers160 × 100 mmADSR, the printed circuit board in 3D

    ADSR

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    82 partsMIT
  • 2 layers160 × 100 mmPHASE SHIFTER, the printed circuit board in 3D

    PHASE SHIFTER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    79 partsMIT
  • 2 layers160 × 100 mmEXPANDER, the printed circuit board in 3D

    EXPANDER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    77 partsMIT
  • 2 layers160 × 100 mmADSR CONTROLLER, the printed circuit board in 3D

    ADSR CONTROLLER

    Desval27/FormantKO

    Knock-off of the Elektor Formant Synthesizer project with the initial goal of being quasi-authentic and secondary goal undecided. Probably tweaks of some kind.

    77 partsMIT

Similar boards

  • 2 layers105.4 × 57.2 mmPower bus, the printed circuit board in 3D

    Power bus

    alexdrymonitis/3dPd

    Digital modular hardware/software synthesizer project based on Pure Data and Arduino

    25 parts31GPL-3.0
  • 2 layers74.4 × 99.6 mmMelody, the printed circuit board in 3D

    Melody

    IshikawaRasoto/integration-workshop-3

    Repository for the development of the project for the Integration Workshop 3 course.

    49 parts1
  • 4 layers80 × 80.2 mm5XL REV0, the printed circuit board in 3D

    5XL REV0

    DangerousPrototypes/BusPirate5-hardware

    Bus Pirate Hardware and accessories for v5 and higher

    227 parts125MIT
  • 2 layers53.5 × 41 mmImpedanceP1, the printed circuit board in 3D

    ImpedanceP1

    wenkeli/impedance_meter

    Electronics to measure the resistance of multi-channel animal electrodes

    35 parts1
  • 2 layers53.6 × 56.8 mmMisc, the printed circuit board in 3D

    Misc

    lytex/misc

    PCBs that don't go in any particular repo

    9 partsLGPL-2.1
  • 2 layers94.5 × 55 mmAdsr 1, the printed circuit board in 3D

    Adsr 1

    hermflink/3310ADSR

    Dual ADSR based on AS3310

    54 parts11GPL-3.0
  • 2 layers36.6 × 77.4 mmLicht, the printed circuit board in 3D

    Licht

    microresearch/ERD-breath

    Divinatory smoke and fire based eurorack module.

    41 parts6
  • 2 layers89.4 × 66.9 mmAcondicionador, the printed circuit board in 3D

    Acondicionador

    fmirandabonomi/pcb_antena_vlf

    # Antena VLF, Laboratorio de Telecomunicaciones FACET UNT

    37 parts2

Questions

How big is the ANALOG PCB?

It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ANALOG use?

96 parts, built around the TL082, TL084 and CD4067. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ANALOG KiCad files?

From the Desval27/FormantKO repository on GitHub, at the commit this page was made from: the board is MFOS/modules/ANALOG/ANALOG.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ANALOG design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).