
Venturi MainPCB
David207025/Venturi
Highly optimized line follower robot controlled by the ESP32-S31-WROOM-3 module

Highly optimized line follower robot controlled by the ESP32-S31-WROOM-3 module
Venturi Remote is an open-source printed circuit board by David207025, from the David207025/Venturi repository on GitHub. It is a 2-layer board of 32 × 74 mm with 38 parts on 45 nets, routed with 145 tracks and 114 vias.
It is built around the ESP32-C6-MINI-1, BAT54A and SK6812. Its parts include 12 resistors, 11 capacitors, 5 switches, 3 diodes and 2 ICs. It belongs with the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C7, C9, C11 |
| 4 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C8, C10 |
| 4 | B3FS | Button_Switch_SMD:SW_SPST_Omron_B3FS-105xP | S2, S3, S4, S5 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R11, R12 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 15k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 2.2n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 3k3 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 3u3 | Inductor_SMD:L_Vishay_IHLP-1616 | L1 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 68k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 8k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | AP64500SP-13 | Package_SO:SO-8EP_DIO | U1 |
| 1 | BAT54A | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | BOOT | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | Battery | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J1 |
| 1 | EN | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | ESP32-C6-MINI-1 | RF_Module:ESP32-C6-MINI-1 | U2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | POWER_EN | Button_Switch_SMD:SW_SPST_Omron_B3FS-105xP | S1 |
| 1 | SK6812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D2 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |

David207025/Venturi
Highly optimized line follower robot controlled by the ESP32-S31-WROOM-3 module

David207025/Venturi
Highly optimized line follower robot controlled by the ESP32-S31-WROOM-3 module

mcskny/wireless-he-macropad
A wireless, 12-key Hall-effect macropad built around a custom PCB, an ESP32-C6 sender, an ESP32-S3 USB receiver, and a native macOS companion app.

MycroftAI/hardware-mycroft-mark-II
Mycroft's Mark II Rpi mechanical, electrical and industrial designs


marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32
Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)

95lux/aware01
Aarebot is a dynamic realtime sampler built as a Eurorack module. At its core is a stereo tape-style engine with a hot-swapping record/playback buffer - this enables to record and play simultaneously.

f1ac0/A500-IDE-RAM
2MB autoconfig Fast SRAM and IDE port expansion for Amiga 500

PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format
It measures 32 × 74 mm and has 2 copper layers, 1.6 mm thick.
38 parts, built around the ESP32-C6-MINI-1, BAT54A and SK6812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the David207025/Venturi repository on GitHub, at the commit this page was made from: the board is Hardware/Venturi_Remote/Venturi_Remote.kicad_pcb and its schematic Hardware/Venturi_MainPCB/Venturi_MainPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask David207025 before reusing the design.