
74xx quad logic
marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

Small circuit boards to assist with breadboard prototyping with SMD packages.
ATTINY3226 is an open-source printed circuit board by marsairforce, from the marsairforce/breakout_boards repository on GitHub, published under the Unlicense licence. It is a 4-layer board of 23.9 × 44.5 mm with 56 parts on 66 nets, routed with 73 tracks and 0 vias.
It is built around the ATTINY3226-MF, TPS630701RNMR and LM66200DRL, with the AP2112K-3.3, TPS2069CDBV and LTST-C190KRKT among its other parts. Its parts include 17 capacitors, 17 resistors, 7 ICs, 7 diodes and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
The MA730 detects the absolute angular position of a [diametrically magnetized cylinder] permanent magnet on a rotating shaft to provide accurate angle measurements at speeds from 0 to 60,000 rpm.
I got this for
This is an impossible QFN-16 (3mmx3mm) package. So before we can use this we need to learn how well it works in a breadboard, thus this project.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 22uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C9, C10, C13 |
| 5 | LTST-C190KRKT | LED_SMD:LED_0603_1608Metric | D2, D3, D5, D6, D7 |
| 4 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C8, C11 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C12, C16, C17 |
| 3 | 300 | Resistor_SMD:R_0402_1005Metric | R12, R15, R17 |
| 2 | 100K | Resistor_SMD:R_0402_1005Metric | R1, R11 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R5, R13 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | 4.7K | Resistor_SMD:R_0402_1005Metric | R14, R16 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J2 |
| 2 | LM66200 | Package_TO_SOT_SMD:SOT-583-8 | U5, U7 |
| 1 | 1.5uH | Inductor_SMD:L_Sunlord_MWSA0402S | L1 |
| 1 | 18F | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | 18pF | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 22.1K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 47.5K | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | A03401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ABS07-32.768KHZ-T | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | ATtiny3226-M | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U4 |
| 1 | BAT54A | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | CP2102N-Axx-xQFN20 | Package_DFN_QFN:SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U1 |
| 1 | D5V0F3B6LP20 | Package_DFN_QFN:U-DFN2020-6_2x2mm_P0.65mm | D4 |
| 1 | PTS810SJG250SMTR LFS | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | TPS2069CDBV | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | TPS630701RNMR | Package_DFN_QFN:Texas_S-PVQFN-N15_ThermalPad | U2 |
| 1 | UDPI | 00_Local:RoundPad_1x04_P2.00mm | J4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |

marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

jostsalathe/ClickyTvRemote
A custom IR TV remote with mechanical keyboard switches



Janky-Jingle-Crew/SouthPoleLevitator
2025 Christmas card "South Pole Levitator"

Asapgiri/kbb-keyboard
Keep in mind, that first the Atmega32u4 will need a bootloader, witch is programmed trough the bootloader pins. We had to program it with an Esp32-C3-mini, witches Arduino ISA codes I will upload here under the folder…

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

SirBramble/The-Typeuwu
The Type Universal Wordtyping Unit DIY Keyboard with magnetic Modules

It measures 23.9 × 44.5 mm and has 4 copper layers, 1.6 mm thick.
56 parts, built around the ATTINY3226-MF, TPS630701RNMR, LM66200DRL and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the marsairforce/breakout_boards repository on GitHub, at the commit this page was made from: the board is devices/ATTINY3226/ATTINY3226.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).