Skip to the content

LM66200DRL

Texas InstrumentsExtended

-40℃~+125℃ 1.32uA 1.6V~5.5V 2 74mΩ Reverse current blocking、Over temperature protection、With enable SOT-583 ORing Controllers ROHS

Part id
ti/LM66200DRL
Category
Power Distribution Switches
Package
SOT-583
Pins
8
In stock
10,852 at JLCPCB (C3235556)
Used on
29 open-source boards

Overview

The LM66200DRL is a power Distribution Switche made by Texas Instruments in a SOT-583 package with 8 pins. -40℃~+125℃ 1.32uA 1.6V~5.5V 2 74mΩ Reverse current blocking、Over temperature protection、With enable SOT-583 ORing Controllers ROHS.

PCBKit's library has its KiCad symbol (LM66200:LM66200, from Antmicro) and its footprint (sc-70-8:SC-70-8, from Antmicro), ready for a KiCad board. 10,852 are in stock at JLCPCB (part C3235556). 29 open-source boards in 27 repositories on GitHub use it.

Symbol

1GND2VOUT3VIN14ON6VIN28ST
LM66200:LM66200From Antmicro

Footprint

sc-70-8:SC-70-8From Antmicro

From the datasheet

12
Supply, least
1.6 V · VIN1, recommended operating min · p. 4
Supply, most
5.5 V · VIN1, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN1 and VIN2, absolute max · p. 4
Works from
-40 °C · Ambient temperature min · p. 4
Works up to
125 °C · Ambient temperature max · p. 4
Takes working
1.37 µA · sum of VIN1 quiescent and VIN2 standby, VIN1 powers VOUT, 25°C, typical · p. 5
Takes asleep
220 nA · VIN1 standby, VIN2 powers VOUT, 25°C, typical · p. 5
Takes asleep
50 nA · VIN2 standby, VIN1 powers VOUT, 25°C, typical · p. 5
Gives
2.5 A · Continuous current per channel max · p. 9
Junction to air (DRL (SOT))
111.5 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DRL (SOT))
19.4 K/W · Junction-to-case top thermal resistance · p. 4
Junction to board (DRL (SOT))
35.8 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

5
Supply selection
Automatic diode mode prioritizes the highest voltage supply · p. 9
Protection
Reverse current blocking when VOUT > VINx · p. 1
Protection
Thermal shutdown · p. 1
On-resistance
40 mΩ typical · p. 1
Package
DRL, 8-pin SOT · p. 3

Around it

2
cap at least 0.1 uF
between VOUT and GND; Output capacitance recommended for linear soft start behavior. · p. 9
cap 100 μF
between VOUT and GND; Output capacitance in the typical application design example. · p. 11

Specifications

73
ParameterConditionsAs printedPage
Input Voltage VIN1, VIN2Over operating free-air temperature rangemin -0.3 · max 6 V4
Output Voltage VOUTOver operating free-air temperature rangemin -0.3 · max 6 V4
Control Pin Voltage VST, VONOver operating free-air temperature rangemin -0.3 · max 6 V4
Maximum Current IMAXOver operating free-air temperature rangemax 2.5 A4
Maximum Pulsed Current IMAX,PLSMax duration 1ms, Duty cycle of 2%max 4 A4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; rating ±2000 Vmax 2000 V4
Electrostatic discharge V(ESD)Charged device model (CDM), ANSI/ESDA/JEDEC JS-002, all pins; rating ±500 Vmax 500 V4
Input Voltage VIN1, VIN2Over operating free-air temperature rangemin 1.6 · max 5.5 V4
Output Voltage VOUTOver operating free-air temperature rangemin 0 · max 5.5 V4
Control Pin Voltage VST, VONOver operating free-air temperature rangemin 0 · max 5.5 V4
Ambient Temperature TAmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJALM66200, DRL (SOT), 8-PINStyp 111.5 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)LM66200, DRL (SOT), 8-PINStyp 19.4 °C/W4
Junction-to-board thermal resistance RθJBLM66200, DRL (SOT), 8-PINStyp 35.8 °C/W4
Junction-to-top characterization parameter ΨJTLM66200, DRL (SOT), 8-PINStyp 1.2 °C/W4
Junction-to-board characterization parameter ΨJBLM66200, DRL (SOT), 8-PINStyp 19.1 °C/W4
VIN1 Standby Current ISTBY, VIN1VIN2 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = 25°Ctyp 0.22 uA5
VIN1 Standby Current ISTBY, VIN1VIN2 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = –40°C to 85°Cmax 0.31 uA5
VIN1 Standby Current ISTBY, VIN1VIN2 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = –40°C to 105°Cmax 0.32 uA5
VIN2 Standby Current ISTBY, VIN2VIN1 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = 25°Ctyp 0.05 uA5
VIN2 Standby Current ISTBY, VIN2VIN1 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = –40°C to 85°Cmax 0.07 uA5
VIN2 Standby Current ISTBY, VIN2VIN1 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = –40°C to 105°Cmax 0.09 uA5
VIN1 Quiescent Current IQ, VIN1VIN1 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = 25°Ctyp 1.32 uA5
VIN1 Quiescent Current IQ, VIN1VIN1 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = –40°C to 85°Cmax 3.6 uA5
VIN1 Quiescent Current IQ, VIN1VIN1 powers VOUT; VIN1 > VIN2 + 0.1 V; TA = –40°C to 105°Cmax 4.4 uA5
VIN2 Quiescent Current IQ, VIN2VIN2 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = 25°Ctyp 1.35 uA5
VIN2 Quiescent Current IQ, VIN2VIN2 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = –40°C to 85°Cmax 3.7 uA5
VIN2 Quiescent Current IQ, VIN2VIN2 powers VOUT; VIN2 > VIN1 + 0.2 V; TA = –40°C to 105°Cmax 4.5 uA5
VIN1 Shutdown Current ISD,VIN1ON = 5 V; VIN1 > VIN2; VOUT = 0 V; TA = 25°Ctyp 0.1 uA5
VIN1 Shutdown Current ISD,VIN1ON = 5 V; VIN1 > VIN2; VOUT = 0 V; TA = –40°C to 85°Cmax 1.3 uA5
VIN1 Shutdown Current ISD,VIN1ON = 5 V; VIN1 > VIN2; VOUT = 0 V; TA = –40°C to 105°Cmax 2.9 uA5
VIN1 Shutdown Current ISD,VIN1ON = 5 V; VIN1 < VIN2; VOUT = 0 V; TA = 25°Ctyp 0.05 uA5
VIN1 Shutdown Current ISD,VIN1ON = 5 V; VIN1 < VIN2; VOUT = 0 V; TA = –40°C to 85°Cmax 1 uA5
VIN1 Shutdown Current ISD,VIN1ON = 5 V; VIN1 < VIN2; VOUT = 0 V; TA = –40°C to 105°Cmax 2.4 uA5
VIN2 Shutdown Current ISD,VIN2ON = 5 V; VIN2 > VIN1; VOUT = 0 V; TA = 25°Ctyp 0.05 uA5
VIN2 Shutdown Current ISD,VIN2ON = 5 V; VIN2 > VIN1; VOUT = 0 V; TA = –40°C to 85°Cmax 1.3 uA5
VIN2 Shutdown Current ISD,VIN2ON = 5 V; VIN2 > VIN1; VOUT = 0 V; TA = –40°C to 105°Cmax 2.9 uA5
VIN2 Shutdown Current ISD,VIN2ON = 5 V; VIN2 < VIN1; VOUT = 0 V; TA = 25°Ctyp 0.05 uA5
VIN2 Shutdown Current ISD,VIN2ON = 5 V; VIN2 < VIN1; VOUT = 0 V; TA = –40°C to 85°Cmax 0.7 uA5
VIN2 Shutdown Current ISD,VIN2ON = 5 V; VIN2 < VIN1; VOUT = 0 V; TA = –40°C to 105°Cmax 2.1 uA5
ON pin leakage IONVIN1 = VIN2 = PR1 = 5.5 V; TA = –40°C to 105°Cmax 0.1 uA5
ST pin leakage ISTVIN1 = VIN2 = ST = 5.5 V; TA = –40°C to 105°Cmax 0.03 uA5
On-Resistance RONVINx = 5 V; IOUT = 200 mA; TA = 25°Ctyp 37 · max 46 mΩ5
On-Resistance RONVINx = 5 V; IOUT = 200 mA; TA = –40°C to 85°Cmax 55 mΩ5
On-Resistance RONVINx = 5 V; IOUT = 200 mA; TA = –40°C to 105°Cmax 60 mΩ5
On-Resistance RONVINx = 3.3 V; IOUT = 200 mA; TA = 25°Ctyp 40 · max 48 mΩ5
On-Resistance RONVINx = 3.3 V; IOUT = 200 mA; TA = –40°C to 85°Cmax 55 mΩ5
On-Resistance RONVINx = 3.3 V; IOUT = 200 mA; TA = –40°C to 105°Cmax 59 mΩ5
On-Resistance RONVINx = 1.8 V; IOUT = 200 mA; TA = 25°Ctyp 41 · max 51 mΩ5
On-Resistance RONVINx = 1.8 V; IOUT = 200 mA; TA = –40°C to 85°Cmax 61 mΩ5
On-Resistance RONVINx = 1.8 V; IOUT = 200 mA; TA = –40°C to 105°Cmax 66 mΩ5
On-Resistance RONVINx = 1.6 V; IOUT = 200 mA; TA = 25°Ctyp 42 · max 52 mΩ5
On-Resistance RONVINx = 1.6 V; IOUT = 200 mA; TA = –40°C to 85°Cmax 68 mΩ5
On-Resistance RONVINx = 1.6 V; IOUT = 200 mA; TA = –40°C to 105°Cmax 74 mΩ5
Status pin VOL VOL,STIST = 1 mA; TA = –40°C to 105°Cmax 0.1 V5
Status pin response time tSTTA = –40°C to 105°Ctyp 5 us5
ON reference voltage VON1.6 V ≤ VINx ≤ 5.5 V; TA = –40°C to 105°Cmin 0.8 · typ 1 · max 1.2 V5
Reverse current blocking response time tRCBVOUT > VINx + 1 V; TA = –40°C to 105°Ctyp 2 us6
Reverse current blocking rising threshold VRCB,R1.6 V ≤ VINx ≤ 5.5 V; TA = –40°C to 105°Ctyp 42 · max 70 mV6
Reverse current blocking falling threshold VRCB,F1.6 V ≤ VINx ≤ 5.5 V; TA = –40°C to 105°Ctyp 17 · max 40 mV6
Reverse current blocking activation current IRCB1.6 V ≤ VINx ≤ 5.5 V; TA = –40°C to 105°Cmin 1.4 · max 4 A6
Thermal shutdown TSDtyp 170 °C6
Thermal shutdown hysteresis TSDHYStyp 20 °C6
Switchover time, VINx = 5 V tSWRL = 10Ω, CL = 10uF; over operating free-air temperature rangetyp 8 us6
Switchover time, VINx = 3.3 V tSWRL = 10Ω, CL = 10uF; over operating free-air temperature rangetyp 6.2 us6
Switchover time, VINx = 1.8 V tSWRL = 10Ω, CL = 10uF; over operating free-air temperature rangetyp 17.7 us6
Delay time, VINx = 5 V tDRL = 100Ω, CL = 10uF; over operating free-air temperature rangetyp 1 ms6
Delay time, VINx = 3.3 V tDRL = 100Ω, CL = 10uF; over operating free-air temperature rangetyp 1.2 ms6
Delay time, VINx = 1.8 V tDRL = 100Ω, CL = 10uF; over operating free-air temperature rangetyp 1.4 ms6
Soft-start time, VINx = 5 V tSSRL = 100Ω, CL = 10uF; over operating free-air temperature rangetyp 1.7 ms6
Soft-start time, VINx = 3.3 V tSSRL = 100Ω, CL = 10uF; over operating free-air temperature rangetyp 1.3 ms6
Soft-start time, VINx = 1.8 V tSSRL = 100Ω, CL = 10uF; over operating free-air temperature rangetyp 0.9 ms6

Pins, by the datasheet

8
1 GND
Device ground. · p. 3
2 VOUT
Output power. · p. 3
3 VIN1
Channel 1 input power. · p. 3
4 ON
Active low enable; low enables the device, high turns off both channels. · p. 3
5 GND
Device ground. · p. 3
6 VIN2
Channel 2 input power. · p. 3
7 VOUT
Output power. · p. 3
8 ST
Status high when VIN1 is used and low when VIN2 is used; can be pulled up to VIN1 to reduce quiescent current when VIN2 powers the output. · p. 3

Ordering codes, by the datasheet

2
LM66200DRLR
SOT-5X3 (DRL), 8 pins · 4000 per large tape and reel; lead finish Call TI | Sn; -40 to 125 °C · p. 15
LM66200DRLR.A
SOT-5X3 (DRL), 8 pins · 4000 per large tape and reel; lead finish SN; -40 to 125 °C · p. 15

Open-source boards using it

29See all 29
  • 6 layers76.2 × 20.3 mmDEV G2-NANO, the printed circuit board in 3D

    DEV G2-NANO

    theta-machines/DEV-G2-NANO

    The G2 Nano is powered by a record-breaking 1 GHz Arm Cortex-M7 processor, combining the performance of an application processor with real-time determinism.

    141 parts346CERN-OHL-P-2.0
  • 2 layers31.9 × 36 mmLemon pcb swizzle, the printed circuit board in 3D

    Lemon pcb swizzle

    rianadon/Cosmos-Keyboard-PCBs

    Open-Source keyboard PCB designs for the Cosmos Keyboard Generator

    63 parts43
  • 4 layers23.9 × 44.5 mmATTINY3226, the printed circuit board in 3D

    ATTINY3226

    marsairforce/breakout_boards

    Small circuit boards to assist with breadboard prototyping with SMD packages.

    56 parts39Unlicense
  • 4 layers65 × 30 mmSoleil, the printed circuit board in 3D

    Soleil

    protolux-electronics/soleil_hardware

    Hardware design files for Soleil, an open source power management and sleep control board for Raspberry Pi

    81 parts22CERN-OHL-P-2.0
  • 2 layers39.4 × 20.3 mmRp2040-pmod, the printed circuit board in 3D

    Rp2040-pmod

    mwelling/rp2040-pmod

    RP2040 MCU based PMOD

    46 parts21MIT
  • 4 layers57.9 × 59.4 mmGW4302, the printed circuit board in 3D

    GW4302

    garrettsworkshop/GW4302

    Prototype RAM cartridge compatible with Commodore 1700/1750/1764 RAM Expansion Unit (REU)

    100 parts11
  • 4 layers210.9 × 127 mmDual panel, the printed circuit board in 3D

    Dual panel

    fchorney/krakenpad-poc

    proof of concept and research into making kraken pad

    174 parts1

Questions

Is there a KiCad symbol and footprint for the LM66200DRL?

Yes. The symbol is LM66200:LM66200 and the footprint sc-70-8:SC-70-8, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM66200DRL?

SOT-583, with 8 pins. Its footprint is drawn on this page.

Where is the LM66200DRL datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM66200DRL?

JLCPCB lists it as part C3235556, with 10,852 in stock; the sellers' links on this page open their listings.

Which open-source boards use the LM66200DRL?

29 boards in 27 repositories on GitHub; the most starred are listed on this page, with their KiCad files.