
CRImier MyKiCad vaio re
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

RP2040 MCU based PMOD
Rp2040-pmod is an open-source printed circuit board by mwelling, from the mwelling/rp2040-pmod repository on GitHub, published under the MIT licence. It is a 2-layer board of 39.4 × 20.3 mm with 46 parts on 62 nets, routed with 420 tracks and 47 vias.
It is built around the RP2040, W25Q16JVUXIQ and AP2112K-3.3, with the LM66200DRL among its other parts. Its parts include 19 capacitors, 12 resistors, 4 ICs, 4 connectors and 3 switches. It belongs with the RP2040 boards of this library.
Simple RP2040 MCU based PMOD

| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C8, C9, C13, C14, C15, C16, C17, C18, C19 |
| 7 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C7, C10, C11, C12 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R6, R9, R12 |
| 3 | 1K | Resistor_SMD:R_0402_1005Metric | R2, R10, R11 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 27pF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | G*** | kibuzzard-6385637E | kibuzzard-6385637E, kibuzzard-6385637E |
| 1 | 12Mhz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Horizontal | J3 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | LM66200 | rp2040-pmod:SOT-5x3 | U3 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW3 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U4 |
| 1 | USB Boot | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | USER1 | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW2 |
| 1 | W25Q16JVUXIQ | rp2040-pmod:USON-8_2x3 | U1 |

punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

16n-faderbank/16nx
16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.

NickGuyver/OSUMGP-RP2040
KiCanvas link so you don't have to download to just review the files is here




TheContrappostoShop/PICOre
The PICOre project consist of an ecosystem with stamp module all pin to pin compatible.

mburger89/SMK_macro_pad
4x4 wireless macro pad — RP2040 + Raspberry Pi RM2. KiCad project generated from Python; includes a 42%-smaller 'mini' variant with back-mounted electronics.
It measures 39.4 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
46 parts, built around the RP2040, W25Q16JVUXIQ, AP2112K-3.3 and LM66200DRL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mwelling/rp2040-pmod repository on GitHub, at the commit this page was made from: the board is rp2040-pmod.kicad_pcb and its schematic rp2040-pmod.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).