Skip to the content
12345

TPS2069CDBV

Texas InstrumentsExtended

-40℃~+125℃ 1 1.5A 4.5V~5.5V 76mΩ Active High High Side Switch 输出放电功能、软启动、欠压锁定、集成电荷泵、Overcurrent Protection、Over temperature protection、Short-Circuit Protection、反向电流阻断 SOT-23-5 Power Distribution Switches ROHS

Part id
ti/TPS2069CDBV
Category
Power Distribution Switches
Package
SOT-23-5
Pins
5
In stock
2,266 at JLCPCB (C181752)
Used on
10 open-source boards

Overview

The TPS2069CDBV is a power Distribution Switche made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃ 1 1.5A 4.5V~5.5V 76mΩ Active High High Side Switch 输出放电功能、软启动、欠压锁定、集成电荷泵、Overcurrent Protection、Over temperature protection、Short-Circuit Protection、反向电流阻断 SOT-23-5 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (Power_Management:TPS2069CDBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 2,266 are in stock at JLCPCB (part C181752). 10 open-source boards in 5 repositories on GitHub use it.

Symbol

OUT1GND2FLT3EN4IN5
Power_Management:TPS2069CDBVFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the TPS2069CDBV
PinNameType
1OUTPower out
2GNDPower in
3FLTOpen collector
4ENInput
5INPower in

Open-source boards using it

10See all 10
  • 6 layers230 × 56 mmOvc, the printed circuit board in 3D

    Ovc

    osrf/ovc

    the Open Vision Computer

    379 parts207Apache-2.0
  • 4 layers23.9 × 44.5 mmATTINY3226, the printed circuit board in 3D

    ATTINY3226

    marsairforce/breakout_boards

    Small circuit boards to assist with breadboard prototyping with SMD packages.

    56 parts39Unlicense
  • 4 layers30.1 × 30.1 mmMaglev driver, the printed circuit board in 3D

    Maglev driver

    Janky-Jingle-Crew/SouthPoleLevitator

    2025 Christmas card "South Pole Levitator"

    65 parts3
  • 2 layers308.9 × 101.5 mmKeyboard, the printed circuit board in 3D

    Keyboard

    Asapgiri/kbb-keyboard

    Keep in mind, that first the Atmega32u4 will need a bootloader, witch is programmed trough the bootloader pins. We had to program it with an Esp32-C3-mini, witches Arduino ISA codes I will upload here under the folder…

    222 parts2
  • 6 layers110.5 × 50 mmMobof, the printed circuit board in 3D

    Mobof

    osrf/ovc

    the Open Vision Computer

    225 parts207Apache-2.0
  • 6 layers87 × 81 mmOvc2 mobo, the printed circuit board in 3D

    Ovc2 mobo

    osrf/ovc

    the Open Vision Computer

    181 parts207Apache-2.0
  • 6 layers87 × 81 mmOvc2 mobo, the printed circuit board in 3D

    Ovc2 mobo

    osrf/ovc

    the Open Vision Computer

    189 parts207Apache-2.0
  • 4 layers49.8 × 25.5 mmCorevus toolboard, the printed circuit board in 3D

    Corevus toolboard

    calithameridi/corevus

    High-flexibility, low-cost mechatronics controller for 3D printers

    84 parts25

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS2069CDBV?

Yes. The symbol is Power_Management:TPS2069CDBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS2069CDBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TPS2069CDBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS2069CDBV?

JLCPCB lists it as part C181752, with 2,266 in stock; the sellers' links on this page open their listings.

What can replace the TPS2069CDBV?

Parts like it in the library: the SY6280AAC by 矽力杰silergy, the AP2171WG by Diodes Incorporated, the TPS2051BDBV by Texas Instruments and the RT9742CGJ5 by RICHTEK. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS2069CDBV?

10 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.