

Autonomous Rover
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 97
- Nets
- 85
- Pads
- 350
- Tracks, vias
- 648, 51
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 Sep 2026
- Updated
- 12 Oct 2026
Overview
Autonomous Rover is an open-source printed circuit board by dangnguyen06-ee, from the dangnguyen06-ee/Autonomous_Rover_PCB repository on GitHub. It is a 2-layer board with 97 parts on 85 nets, routed with 648 tracks and 51 vias.
It is built around the VEML7700-TT, LM66100DCK and AMS1117-3.3, with the SHT31-DIS-F, SN74LVC2T45DCURE4 and USBLC6-2SC6 among its other parts. Its parts include 26 capacitors, 26 resistors, 19 connectors, 7 ICs and 6 diodes. It belongs with the robots and motor control boards and the ESP32 boards of this library.
Main components
10VEML7700-TT
SMD-4P-25℃~+85℃ 120klx 16bit 2.35mm 2.5V~3.6V 3mm 6.8mm I2C Light Intensity Low power/sleep mode、Spectral correction/filtering、High dynamic range measurement、Adjustable gain control、Interrupt/event trigger、Built-in temperature compensation SMD-4P Ambient Light Sensors ROHSVishay IntertechnologyAmbient Light SensorsLM66100DCK
SC-70-6-40℃~+125℃ 1 1.5A 1.5V~5.5V 150nA 95mΩ Integrated FET Reverse current blocking、Reverse polarity protection、With enable SC-70-6 ORing Controllers ROHSTexas InstrumentsPower Distribution SwitchesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSHT31-DIS-F
DFN-8DFN-8 New Arrivals ROHSSensirionUncategorisedSN74LVC2T45DCURE4
VSSOP-832mA 32mA Level translator Power-off protection、Output enable high-impedance VSSOP-8 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSMAJ5.0A
DO-214AC(SMA)-65℃~+150℃ 400W@10/1000us 43.5A 5V 7V 800uA 9.2V TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)BNO085
LGA-28(3.8x5.2)1.65V~3.6V 12bit、16bit IMU (accelerometer + gyroscope) SPI、I2C、UART X,Y,Z X,Y,Z ±2000dps ±8g LGA-28(3.8x5.2) Accelerometers ROHSCEVAAccelerometersSS16
SMA(DO-214AC)-55℃~+150℃ 100uA@60V 1A 60V 700mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSFUXINSEMISchottky Diodes
Parts
97| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 0.1µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C10, C11, C14, C15, C17, C18, C19, C21, C23, C24, C28 +5 |
| 11 | 10kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R7, R8, R14, R15, R17, R18, R19, R25, R26, R27 |
| 6 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R21, R22, R23, R24 |
| 4 | TestPoint | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1, TP2, TP5, TP6 |
| 3 | 22µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C16, C20 |
| 3 | M2 | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | H1, H2, H3 |
| 2 | 100Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | 4.7kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R20 |
| 2 | 5.1kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x03 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J18, J19 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3 |
| 2 | LM66100DCK | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U5, U6 |
| 2 | SMAJ5.0A | Diode_SMD:D_SMA | D4, D5 |
| 2 | SW_SPDT | Button_Switch_SMD:SW_SPDT_Shouhan_MSK12C02 | SW1, SW2 |
| 1 | 100kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 10µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9_2 |
| 1 | 150Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 1N4148 | Diode_SMD:D_SOD-123 | D1 |
| 1 | 2.0A Hold / 3.5A Trip (16V+) | Fuse:Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder | F1 |
| 1 | 300Ω | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BEAM_LIGHT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J15 |
| 1 | BNO085 | Connector_JST:JST_XH_B10B-XH-A_1x10_P2.50mm_Vertical | J1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | ESP32_L | Connector_PinSocket_2.54mm:PinSocket_1x22_P2.54mm_Vertical | J12 |
| 1 | ESP32_R | Connector_PinSocket_2.54mm:PinSocket_1x22_P2.54mm_Vertical | J13 |
| 1 | HC-SR04_M | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | I2C_1 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J14 |
| 1 | I2C_2 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J17 |
| 1 | L_MOT | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J10 |
| 1 | POWER | Connector_Molex:Molex_Micro-Fit_3.0_43045-0200_2x01_P3.00mm_Horizontal | J16 |
| 1 | R_MOT | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J11 |
| 1 | SHT31-DIS | Sensor_Humidity:Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm | U3 |
| 1 | SN74LVC2T45DCUR | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U7 |
| 1 | SS16 | Diode_SMD:D_SMA | D6 |
| 1 | TCA9548APWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U2 |
| 1 | UART_3V | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | UART_5V | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J7 |
| 1 | VEML7700 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | VL53L5X_L | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | VL53L5X_M | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | VL53L5X_R | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
Similar boards
- 2 layers50 × 30 mm

- 4 layers120 × 76 mm

Panel
vbartusevicius/weather-station
Open-source rooftop weather and air-quality station with no moving parts (Ø 96 × 235 mm, UV-stabilised ASA): ultrasonic wind, acoustic rain and hail, UV / sunlight / night-sky brightness, temperature, humidity…
235 parts - 4 layers65 × 56 mm

Sensor HAT
Eniemooo/Sensor-HAT
Open-hardware indoor air sensor (CO2, VOC/NOx, T/RH, light, sound): HAT for Raspberry Pi or standalone with Seeed XIAO + ESPHome. KiCad 10.
112 parts - 2 layers60 × 30 mm

- 2 layers70 × 55 mm

Uv bench
L-A-7/Electronic-design
Learning workspace for electronics and PCB design (KiCad 10, STM32): UV bench and following projects
90 parts - 2 layers100 × 80 mm

Alarm clock
Carabouille/Alarm_Clock_dawn_simulator
A description of my Alarm clock with dawn simulator for the Fallout event organised By Hackclub
75 parts - 2 layers67 × 25.3 mm

- 4 layers75.5 × 78 mm

Current loop gen
andrzejkasica/CO-sensor
Project based on ME2-CO gas sensor with current loop and 2 relays output.
126 parts
Questions
What parts does the Autonomous Rover use?
97 parts, built around the VEML7700-TT, LM66100DCK, AMS1117-3.3 and SHT31-DIS-F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Autonomous Rover KiCad files?
From the dangnguyen06-ee/Autonomous_Rover_PCB repository on GitHub, at the commit this page was made from: the board is Autonomous_Rover.kicad_pcb and its schematic Autonomous_Rover.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Autonomous Rover design in my own project?
Its repository states no licence, so its author keeps all rights: ask dangnguyen06-ee before reusing the design.