
Thermal pcb
Badbird5907/thermal-camera
My design of a cheap and affordable thermal camera

Flipper thermal camera is an open-source printed circuit board by Badbird5907, from the Badbird5907/flipper-thermal-camera repository on GitHub. It is a 2-layer board of 67 × 25.3 mm with 32 parts on 35 nets, routed with 204 tracks and 74 vias.
It is built around the MLX90640ESF-BAB-000-SP, VEML7700-TT and BNO055, with the SHT31-DIS-F, SP1001-05JTG and RB521S-30 among its other parts. Its parts include 9 capacitors, 6 resistors, 6 ICs, 3 diodes and 2 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C7 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3, C5 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | GND | TestPoint:TestPoint_Pad_D2.0mm | TP3, TP4 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 120nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 5V | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | BNO055 | Package_LGA:LGA-28_5.2x3.8mm_P0.5mm | U3 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Horizontal | J2 |
| 1 | LED_G | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | LED_R | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | MLX90640ESF-BAB-000-SP | Components:TO292P945H1165-4 | U1 |
| 1 | RB521S-30 | Diode_SMD:D_SOD-523 | D3 |
| 1 | SCL | TestPoint:TestPoint_Pad_D2.0mm | TP5 |
| 1 | SDA_TP | TestPoint:TestPoint_Pad_D2.0mm | SDA1 |
| 1 | SHT31-DIS | Sensor_Humidity:Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm | U4 |
| 1 | SP1001-05JTG | Components:SOP65P220X110-6N | U6 |
| 1 | VEML7700-TT | Components:XDCR_VEML7700-TT | IC1 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U2 |

Badbird5907/thermal-camera
My design of a cheap and affordable thermal camera







It measures 67 × 25.3 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the MLX90640ESF-BAB-000-SP, VEML7700-TT, BNO055 and SHT31-DIS-F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Badbird5907/flipper-thermal-camera repository on GitHub, at the commit this page was made from: the board is PCB/flipper-thermal-camera.kicad_pcb and its schematic PCB/flipper-thermal-camera.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Badbird5907 before reusing the design.