Skip to the content
12

SS16

FUXINSEMIExtended

-55℃~+150℃ 100uA@60V 1A 60V 700mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHS

Part id
fuxinsemi/SS16
Category
Schottky Diodes
Package
SMA(DO-214AC)
Pins
2
In stock
234,223 at JLCPCB (C908233)
Used on
66 open-source boards

Overview

The SS16 is a schottky Diode made by FUXINSEMI in a SMA(DO-214AC) package with 2 pins. -55℃~+150℃ 100uA@60V 1A 60V 700mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHS.

PCBKit's library has its KiCad symbol (Diode:SS16, from KiCad's library) and its footprint (Diode_SMD:D_SMA, from KiCad's library), ready for a KiCad board. 234,223 are in stock at JLCPCB (part C908233). 66 open-source boards in 56 repositories on GitHub use it.

Symbol

Diode:SS16From KiCad's library

Footprint

12
Diode_SMD:D_SMAFrom KiCad's library

From the datasheet

5
Reverse voltage, most
60 V · Maximum repetitive peak reverse voltage · p. 1
Forward current, most
1 A · Maximum average forward rectified current at TL (see fig.1) · p. 1
Forward voltage
700 mV · Maximum instantaneous forward voltage at 1.0 A · p. 1
Junction, hottest
150 °C · Maximum operating junction temperature · p. 1
Junction to air (SMA-W/DO-214AC)
90 K/W · Typical, PCB mounted with 2.0x2.0 inch copper pad areas · p. 1

What it is and has

3
Package
JEDEC DO-214AC molded plastic body · p. 1
Junction
Metal silicon junction, majority carrier conduction · p. 1
Compliance
RoHS 2.0 · p. 1

Specifications

12
ParameterConditionsAs printedPage
Maximum repetitive peak reverse voltage VRRMSS16; TA = 25 C unless otherwise notedmax 60 V1
Maximum RMS voltage VRMSSS16; TA = 25 C unless otherwise notedmax 42 V1
Maximum DC blocking voltage VDCSS16; TA = 25 C unless otherwise notedmax 60 V1
Maximum average forward rectified current I(AV)SS16; at TL(see fig.1)max 1 A1
Peak forward surge current IFSMSS16; 8.3ms single half sine-wave superimposed on rated loadmax 30 A1
Maximum instantaneous forward voltage at 1.0A VFSS16; TA = 25 Cmax 0.7 V1
Maximum DC reverse current at rated DC blocking voltage IRSS16; TA=25 Cmax 0.5 mA1
Maximum DC reverse current at rated DC blocking voltage IRSS16; TA=100 Cmax 10 mA1
Typical junction capacitance (NOTE 1) CJSS16; measured at 1MHz and applied reverse voltage of 4.0V D.C.; TA = 25 Ctyp 110 pF1
Typical thermal resistance (NOTE 2) RθJASS16; SMA-W/DO-214AC; P.C.B. mounted with 2.0x2.0”(5.0x5.0cm) copper pad areastyp 90 C/W1
Operating junction temperature range TJ,SS16min -55 · max 150 C1
Storage temperature range TSTGSS16min -55 · max 150 C1

Pins, by the datasheet

2
1 cathode
Cathode; color band denotes cathode end. · p. 3
2 anode
Anode. · p. 3

Open-source boards using it

66See all 66
  • 2 layers96 × 71.6 mmA2DVI.v1.6, the printed circuit board in 3D

    A2DVI.v1.6

    rallepalaveev/A2DVI

    This is based on Clintech Pico Board (CPB) with 48 GPIOs, most 5V tolerant.

    112 parts82MIT
  • 12 layers180 × 150 mmMarble, the printed circuit board in 3D

    Marble

    BerkeleyLab/Marble

    Dual FMC FPGA carrier board developed for general purpose use in particle accelerator electronics instrumentation.

    1,006 parts35
  • 2 layers65 × 70 mmOpenradfan, the printed circuit board in 3D

    Openradfan

    andrekuehne/openradfan

    An ESPHome-driven controller for radiator fans to improve heat output

    49 parts29MIT
  • 8 layers180.6 × 148.5 mmAMC FMC Carrier PcbDoc, the printed circuit board in 3D

    AMC FMC Carrier PcbDoc

    BerkeleyLab/Marble-Mini

    "Marble-Mini" Simple FMC carrier board with SFP, 2x FMC, PoE

    931 parts24
  • 4 layers78.5 × 80 mmDmgplus, the printed circuit board in 3D

    Dmgplus

    Spritetm/dmgplus

    DMGPlus, upgraded internals for the original GameBoy

    108 parts19
  • 2 layers61.8 × 21.6 mmUSBQuadMouse, the printed circuit board in 3D

    USBQuadMouse

    PR77/CH554_USBQuadMouseKeyboard

    CH554 based USB to Quadrature Mouse and Keyboard Interface

    24 parts8MIT
  • 6 layers146.1 × 58.4 mmComp Board, the printed circuit board in 3D

    Comp Board

    badaboombox/SS-Handheld-Console

    An open-source handheld game console built around a Lattice ECP5 FPGA that uses a custom hybrid 2D + 3D graphics engine capable of DS-era 2D-and-3D gameplay at a locked 60 fps.

    248 parts6
  • 2 layers21.4 × 25.2 mmCicada pwm esc, the printed circuit board in 3D

    Cicada pwm esc

    mars2860/cicada

    The quadcopter based on ESP8266 wifi module

    32 parts6GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SS16?

Yes. The symbol is Diode:SS16 and the footprint Diode_SMD:D_SMA, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SS16?

SMA(DO-214AC), with 2 pins. Its footprint is drawn on this page.

Where is the SS16 datasheet?

FUXINSEMI publishes it: the Datasheet link on this page opens it.

Where can I order the SS16?

JLCPCB lists it as part C908233, with 234,223 in stock; the sellers' links on this page open their listings.

What can replace the SS16?

Parts like it in the library: the SS210 by MDD, the SS56 by hongjiacheng, the SS310 by hongjiacheng and the SS36 by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SS16?

66 boards in 56 repositories on GitHub; the most starred are listed on this page, with their KiCad files.