CUSail-Navigation/PCB-FA25-SP26This is a repository containing the PCBs designed during the FA25-SP26 academic year. Due to high compatibility and relative ease of use, all of these files are made with KiCad.
ElectronicsPCB is an open-source printed circuit board by CUSail-Navigation, from the CUSail-Navigation/PCB-FA25-SP26 repository on GitHub. It is a 2-layer board of 62 × 92 mm with 54 parts on 72 nets, routed with 240 tracks and 22 vias.
It is built around the MAX3323EEPE+, B3B-XH-A and B4B-XH-A, with the M20-7832046 among its other parts.
Here are the files for the three main PCBs designed during the FA25-SP26 academic year. These were all designed with KiCad due to its support across all operating systems and our use cases not requiring more sophisticated PCB design tools.
These PCBs were designed with the idea that the boat would contain two electronics boxes - one for digital electronics, and the other for power electronics. The decision to split them was made because it is unlikely that one would need to work on both simultaneously (thus making the electronics physically easier to work with), reduces cable clutter, and reduces the likelihood of every part of the system getting drenched in water in the event that the boat capsizes.
This PCB houses the digital electronics found on the boat. This includes the main microcontroller(s), sensors, radio transmitters/recievers, and interfaces to other parts of the boat which rely on computations. This PCB sits in the digital electronics box.
This PCB contains the circuitry necessary for stepping down and distributing power supplied from our 22.2V LiPo battery. This PCB sits in the power electronics box.
Because we use a LiPo battery, battery failure is possible of the battery discharges too much. This PCB is responsible for monitoring the state of the battery and cutting power in the event that it discharges too much. This PCB is housed in the power electronics box.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1µF | ElectronicsFootprints:CAP_CL10B_01uf_0603 | C1, C2, C3, C4, C5, C6, C8, C9, C10, C11, C12, TeensyC0.1 |
| 9 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 6 | B3B-XH-A | ElectronicsFootprints:B3B-XH-A | 5V_EXTRA, CAMERA, JIB1, JIB2, SAIL, TAIL |
| 4 | 1000uf | ElectronicsFootprints:CAP_EEE1A_1000uf | 5V_BULK1, 5V_BULK2, 5V_BULK3, 5V_BULK4 |
| 3 | 0.1uf | ElectronicsFootprints:CAP_CL10B_01uf_0603 | 3.3V_LOW1, 5V_LOW1, 5V_LOW2 |
| 3 | B4B-XH-A | ElectronicsFootprints:B4B-XH-A | 3.3V_EXTRA, ANEMOMETER, EXTRA1 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | 220uf | ElectronicsFootprints:CAP_87510_220uf | 3.3V_BULK, 3.3V_BULK1 |
| 2 | 22uf | ElectronicsFootprints:CAP_CL32A_22uf_1210 | 5V_MID1, 5V_MID2 |
| 2 | Conn_02x03_Counter_Clockwise | Connector_Molex:Molex_Mini-Fit_Jr_5566-06A_2x03_P4.20mm_Vertical | 5V_SYS1, 5V_SYS2 |
| 1 | 10uf | ElectronicsFootprints:CAP_CL21A_10uf_0805 | 3.3V_MID1 |
| 1 | 47µF | ElectronicsFootprints:CAP_C3225_47uf_1210 | C7 |
| 1 | Conn_02x02_Counter_Clockwise | Connector_Molex:Molex_Mini-Fit_Jr_5566-04A_2x02_P4.20mm_Vertical | 3.3V_SYS |
| 1 | DE9_Socket_MountingHoles | Connector_Dsub:DSUB-9_Socket_Vertical_P2.77x2.84mm_MountingHoles | VectorNavInput1 |
| 1 | DEV-15583 | ElectronicsFootprints:MODULE_DEV-15583 | TEENSY 4.0 |
| 1 | M20-7832046 | ElectronicsFootprints:HARWIN_M20-7832046 | HEADERS1 |
| 1 | max3323eepe+ | ElectronicsFootprints:MAX3323EEPE+ | MAX3323EEPE |
| 1 | ~ | ElectronicsFootprints:XBee | XBEE1 |
It measures 62 × 92 mm and has 2 copper layers, 1.6 mm thick.
54 parts, built around the MAX3323EEPE+, B3B-XH-A, B4B-XH-A and M20-7832046. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CUSail-Navigation/PCB-FA25-SP26 repository on GitHub, at the commit this page was made from: the board is ElectronicsPCB/ElectronicsPCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CUSail-Navigation before reusing the design.
CUSail-Navigation/PCB-FA25-SP26
This is a repository containing the PCBs designed during the FA25-SP26 academic year. Due to high compatibility and relative ease of use, all of these files are made with KiCad.
CUSail-Navigation/PCB-FA25-SP26
This is a repository containing the PCBs designed during the FA25-SP26 academic year. Due to high compatibility and relative ease of use, all of these files are made with KiCad.
CUSail-Navigation/PCB-FA25-SP26
This is a repository containing the PCBs designed during the FA25-SP26 academic year. Due to high compatibility and relative ease of use, all of these files are made with KiCad.
CUSail-Navigation/PCB-FA25-SP26
This is a repository containing the PCBs designed during the FA25-SP26 academic year. Due to high compatibility and relative ease of use, all of these files are made with KiCad.
CUSail-Navigation/PCB-FA25-SP26
This is a repository containing the PCBs designed during the FA25-SP26 academic year. Due to high compatibility and relative ease of use, all of these files are made with KiCad.
nischayhegde/jetson_spi_to_can_x8_breakout
A PCB board for expanding the SPI channels on Jetson Orin nano super into 8 CANfd channels. Comes with chip select logic and jetpack drivers. Supports 1Mbit per CAN channel.
hasenbanck/heteromycin
A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC
CNES/argos-demo-board
Demo board designed to use the ARRIBADA SMD module via USB to send ARGOS messages to the Kineis constellation.
nawalhussein/Actuation-Node-PCB-for-Autonomous-Car-using-KiCad
This project contains the complete hardware design (schematics and PCB layout) and associated software for a custom-built STM32-based actuator control system to be put in the autonomous car.
nealpalmer/UsbJoy
USB Joystick Controller 12Digital/SmartButton, 4Analog, 1Rotary, 1NeoPixel
01binary/str1ker
A human-scale mech integrated with Robot Operating System
