
Remram
hasenbanck/remram
32bit STM32F7 based 3D printing controller using TMC2130 stepper driver

A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC
Heteromycin is an open-source printed circuit board by hasenbanck, from the hasenbanck/heteromycin repository on GitHub. It is a 4-layer board of 200 × 100 mm with 373 parts on 330 nets, routed with 3,342 tracks and 723 vias.
It is built around the STM32H743VIT6, TMC2160-TA and DM3D-SF, with the CAT24C32LI-, IRLML0030TRPBF and BAT54GWJ among its other parts. Its parts include 129 resistors, 115 capacitors, 49 transistors, 27 diodes and 25 connectors. It belongs with the robots and motor control boards and the STM32 boards of this library.
Heteromycin is a 3D printer controller that aims to provide a full stack user experience around Octoprint / Marlin using a custom designed board that integrates a Raspberry Pi 3 or Zero W. It will also provide a solid, powerfull hardware by utilizing quality components, a STM32 32bit MCU and powerfull TMC5160 or TMC2160 driver (SD / SPI mode).

You can use both TMC5160 or TMC2160 as the stepper driver, since they both are functionally / pin equal when used in SD / SPI-Mode.
It doesn't mater choosing one over the other, other than price and availability.
Fine tuning of the MOSFET driver may be necessary.
The hardware is licensed under CERN OHL version 1.2. The software is licensed under GNU GPL v3.
The files under PCB/packages3d are excluded from this license and are provided under fair use terms for this open-source project.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 44 | IRLML0030TRPbF | Package_TO_SOT_SMD:SOT-23 | Q10, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q27, Q28 +28 |
| 40 | 10 | Resistor_SMD:R_0603_1608Metric | R21, R22, R23, R24, R27, R28, R29, R30, R103, R104, R105, R106, R109, R110, R111, R112 +24 |
| 36 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C16, C17, C18, C19, C22, C23, C24, C25, C26, C103, C104, C112, C113, C114, C115 +20 |
| 20 | 220nF | Capacitor_SMD:C_0603_1608Metric | C41, C42, C43, C44, C57, C58, C59, C60, C73, C74, C75, C76, C105, C106, C107, C108 +4 |
| 20 | 47 | Resistor_SMD:R_0603_1608Metric | R17, R18, R19, R20, R48, R49, R50, R51, R65, R66, R67, R68, R82, R100, R101, R102 +4 |
| 18 | 47k | Resistor_SMD:R_0603_1608Metric | R1, R5, R14, R15, R45, R46, R62, R63, R79, R80, R113, R114, R115, R116, R117, R118 +2 |
| 18 | BAT54GWJ | Diode_SMD:D_SOD-123 | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +2 |
| 15 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2, C4, C5, C6, C7, C32, C38, C48, C54, C64, C70, C80, C86, C96, C102 |
| 15 | 470nF | Capacitor_SMD:C_0603_1608Metric | C37, C45, C46, C53, C61, C62, C69, C77, C78, C85, C93, C94, C101, C109, C110 |
| 12 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C28, C30, C35, C36, C51, C52, C67, C68, C83, C84, C99, C100 |
| 10 | 0.1 | Resistor_SMD:R_2512_6332Metric | R25, R26, R56, R57, R73, R74, R90, R91, R107, R108 |
| 10 | 4.7k | Resistor_SMD:R_0603_1608Metric | R12, R13, R119, R120, R121, R122, R123, R124, R125, R126 |
| 8 | 100k | Resistor_SMD:R_0603_1608Metric | R10, R34, R35, R36, R39, R40, R43, R44 |
| 8 | 70543-0001 | heteromycin:70543-0001 | J13, J14, J15, J16, J17, J18, J19, J20 |
| 7 | 100 | Resistor_SMD:R_0603_1608Metric | R31, R32, R33, R37, R38, R41, R42 |
| 6 | 70543-0003 | heteromycin:70543-0003 | J6, J7, J8, J9, J10, J21 |
| 5 | 100nF | Capacitor_SMD:C_1812_4532Metric | C3, C8, C9, C10, C11 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R8, R11, R127, R128, R129 |
| 5 | 2.2 | Resistor_SMD:R_0603_1608Metric | R16, R47, R64, R81, R98 |
| 5 | 22nF | Capacitor_SMD:C_0603_1608Metric | C34, C50, C66, C82, C98 |
| 5 | TMC2160-TA | heteromycin:TQFP-48-1EP_7x7mm_P0.5mm_EP5x5mm_ThermalVias | U6, U7, U8, U9, U10 |
| 4 | 3557-2 | heteromycin:KEYSTONE-FUSE-3557-2 | F1, F2, F3, F4 |
| 4 | MountingHole_3.2mm_M3_Pad | heteromycin:MountingHole_3.2mm_M3_Pad | H3, H4, H6, H7 |
| 3 | 70543-0002 | heteromycin:70543-0002 | J22, J23, J24 |
| 3 | MPZ1608S221A | Resistor_SMD:R_0603_1608Metric | FB1, FB2, FB3 |
| 3 | MountingHole_2.7mm_M2.5_Pad | heteromycin:MountingHole_2.7mm_M2.5_Pad | H1, H2, H5 |
| 3 | PSMN1R2-30YLC,115 | heteromycin:SOT-669_LFPAK_ThermalVias-1 | Q11, Q12, Q13 |
| 3 | SK310A-LTP | Diode_SMD:D_SMA | D7, D8, D9 |
| 3 | SMAJ28A | Diode_SMD:D_SMA | D1, D2, D3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R9 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C15, C111 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C20, C21 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric | C12, C14 |
| 2 | 3.9K | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 39531-1002 | heteromycin:39531-1002 | J3, J4 |
| 2 | CAT24C32 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U4 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric | C13 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 20021121-00010C4LF | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J12 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 4DB-P108-06 | heteromycin:4DB-P108-06 | J2 |
| 1 | AP7365-33WG-7 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical_SMD | J25 |
| 1 | DM3D-SF | Connector_Card:microSD_HC_Hirose_DM3D-SF | J11 |
| 1 | DMG2305UX | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | DMMT5401 | Package_TO_SOT_SMD:SOT-23-6 | Q1 |
| 1 | ECS-TXO-3225-250-TR | heteromycin:ECS-TXO-3225 | X1 |
| 1 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LTST-C194KGKT | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | LTST-C194KSKT | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | Logo_Open_Hardware_Large | Symbol:OSHW-Logo2_14.6x12mm_SilkScreen | LOGO1 |
| 1 | M20-7832046 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | PTS645VL39-2 | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFS | SW1 |
| 1 | S3A-13-F | Diode_SMD:D_SMC | D4 |
| 1 | STM32H743VI | heteromycin:TQFP-100_14x14mm_P0.5mm | U5 |
| 1 | i3A | heteromycin:i3A | U2 |

hasenbanck/remram
32bit STM32F7 based 3D printing controller using TMC2130 stepper driver


nischayhegde/jetson_spi_to_can_x8_breakout
A PCB board for expanding the SPI channels on Jetson Orin nano super into 8 CANfd channels. Comes with chip select logic and jetpack drivers. Supports 1Mbit per CAN channel.




CUSail-Navigation/PCB-FA25-SP26
This is a repository containing the PCBs designed during the FA25-SP26 academic year. Due to high compatibility and relative ease of use, all of these files are made with KiCad.

Accessibilita/recline-controls
Hardware project for open source wheel chair recline control electronics
It measures 200 × 100 mm and has 4 copper layers, 1.6 mm thick.
373 parts, built around the STM32H743VIT6, TMC2160-TA, DM3D-SF and CAT24C32LI-. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hasenbanck/heteromycin repository on GitHub, at the commit this page was made from: the board is heteromycin.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hasenbanck before reusing the design.