2 layers85.6 × 72 mm
2 layers57.3 × 79.5 mm
Esp32 example
csteber02/ECE-445PCB Design of SAFF
- Size
- 57.3 × 79.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 104
- Nets
- 80
- Pads
- 349
- Tracks, vias
- 631, 163
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Feb 2025
- Updated
- 9 May 2025
Overview
Esp32 example is an open-source printed circuit board by csteber02, from the csteber02/ECE-445 repository on GitHub. It is a 2-layer board of 57.3 × 79.5 mm with 104 parts on 80 nets, routed with 631 tracks and 163 vias.
It is built around the ESP32-S3-WROOM-1-N16R2, INA240A1D and MAX14871EUE+, with the OPA2340PA, SS8050-G and AO4485 among its other parts. Its parts include 31 resistors, 27 capacitors, 8 connectors, 7 ICs and 4 diodes. It belongs with the ESP32 boards of this library.
Main components
8
ESP32-S3-WROOM-1-N16R2
SMD,25.5x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 On-board PCB Antenna UART、SDIO、SPI、I2C、GPIO、PWM、ADC、I2S、JTAG、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
INA240A1D
SOIC-8-40℃~+125℃ -4V~80V 1 1.8mA 132dB 2.7V~5.5V 20V/V 250nV/℃ 2V/us 400kHz 40nV/√Hz@1kHz 5uV 90uA Bidirectional detection、Zero drift / auto-zero、Programmable output reference level、Analog output interface ±80V SOIC-8 Current Sense Amplifiers ROHSTexas InstrumentsCurrent Sense Amplifiers
MAX14871EUE+
TSSOP-16-EP-40℃~+85℃ 334mΩ 3A 4.5V~36V TSSOP-16-EP Brushed DC Motor Drivers ROHSMaxim Integrated (Analog Devices)Brushed DC Motor Drivers
OPA2340PA
PDIP-8-40℃~+85℃ 0.2pA 0.2pA 150uV 2 2.5uV/℃ 2.7V~5.5V 25nV/√Hz@1kHz 5.5MHz 50mA 6V/us 750uA 80dB Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
SS8050-G
SOT-231 NPN 1.5A 100 100MHz 100nA 25V 300mW 400mV 5V NPN SOT-23 Bipolar (BJT) ROHSComchipBipolar (BJT)AO4485
SOIC-8-55℃~+150℃ 1 P-Channel 1.7V 10A 15mΩ@10V 180pF 3.1W 3nF 40V 55nC@10V SOIC-8 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsBAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes
SP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
104| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | TestPoint | TestPoint:TestPoint_Keystone_5010-5014_Multipurpose | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP12, TP13 |
| 10 | 100n | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6, C9, C13, C14, C15, C21, C24, C25 |
| 9 | 100k | Resistor_SMD:R_0805_2012Metric | R6, R8, R10, R11, R24, R25, R27, R28, R29 |
| 6 | 10u | Resistor_SMD:R_1206_3216Metric | C1, C2, C3, C10, C11, C12 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R9, R13, R14, R18, R19 |
| 5 | DNP | Resistor_SMD:R_0805_2012Metric | R2, R16, R22, R23, R26 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R12, R17, R20 |
| 4 | DNP | Capacitor_SMD:C_0805_2012Metric | C7, C8, C17, C22 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C16, C20, C23 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J4, J8 |
| 2 | 0 | Resistor_SMD:R_0805_2012Metric | R7, R21 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C18, C19 |
| 2 | 20m | Resistor_SMD:R_1206_3216Metric | R1, R15 |
| 2 | 33u | Capacitor_SMD:C_0805_2012Metric | C26, C27 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | INA240A1D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U4 |
| 2 | MAX14871EUE+ | local_footprints:21-0108_U16E&plus_3_MXM | U2, U5 |
| 2 | SS8050-G | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1, SW2 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP3 |
| 1 | 10.0k | Resistor_SMD:R_0805_2012Metric | R31 |
| 1 | 31.3k | Resistor_SMD:R_0805_2012Metric | R30 |
| 1 | 4.7u | Inductor_SMD:L_Taiyo-Yuden_NR-60xx | L1 |
| 1 | AO4485 | local_footprints:SO8SOP-8L_AOS | Q1 |
| 1 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | Conn_01x05_Female | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_01x08_Female | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | Conn_01x09_Female | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J5 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J7 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D4 |
| 1 | D_Zener | local_footprints:SOD-123_ONS | D2 |
| 1 | ESP32-S3-WROOM-1-N16R2 | local_footprints:ESP32-S3-WROOM-1_EXP | U7 |
| 1 | Fuse | Fuse:Fuseholder_Littelfuse_Nano2_154x | F1 |
| 1 | OPA2340 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | TPS62933ODRLR | local_footprints:SOT5X3-8_DRL_TEX | U6 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP11 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J2 |
Questions
How big is the Esp32 example PCB?
It measures 57.3 × 79.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32 example use?
104 parts, built around the ESP32-S3-WROOM-1-N16R2, INA240A1D, MAX14871EUE+ and OPA2340PA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32 example KiCad files?
From the csteber02/ECE-445 repository on GitHub, at the commit this page was made from: the board is esp32_example_rev_A/esp32_example.kicad_pcb and its schematic Final Project V1/Final Project V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32 example design in my own project?
Its repository states no licence, so its author keeps all rights: ask csteber02 before reusing the design.
More from csteber02/ECE-445
1Similar boards
- 2 layers100 × 74 mm
- 2 layers40 × 111 mm
- 2 layers65.9 × 44 mm
- 2 layers95 × 53.1 mm
Shematic for power and light system
jasmehar/Smart_motorcycle_helmet
Design report until i get the notebook
35 parts - 2 layers88.9 × 78.7 mm
RecordFlipper PCB
riyaanjain/VinylRecordFlipper_PCB
But each side of a 12 inch LP can only store about 20 minutes of music, and I don't necessarily love having to get up to flip the record often. I just wish that, after I put the record on, it would play the entire album.
34 parts - 2 layers56.6 × 70 mm
- 2 layers89 × 45 mm
MonitoringSystem PCB
Danielbaker31/HouseholdWaterMonitoringSystem
This is a personal side project created by Daniel, Advait, and Jack. It is a household water monitoring system, allowing households to track how much water they are using, and pinpoint from which source it is coming…
96 parts - 2 layers96.5 × 58.7 mm
JargonJolt
lgkh2002/ECE445
This is the Git repository for the JargonJolt ECE445 project by Daniel Chamoun, Luke Hartmann, and Nan Kang.
75 parts