edvard5/wEasyLed_V2LED Wled is an open-source printed circuit board by edvard5, from the edvard5/wEasyLed_V2 repository on GitHub. It is a 2-layer board of 40 × 111 mm with 96 parts on 106 nets, routed with 670 tracks and 130 vias.
It is built around the ESP32-S3-WROOM-1-N16R2, TPS5450DDAR and EL817, with the AMS1117-3.3, INMP441 and SN74LVC2T45DCURE4 among its other parts. Its parts include 27 resistors, 22 capacitors, 13 connectors, 11 ICs and 9 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R4, R10, R19, R20, R25, R26, R27, R29, R31, R33 |
| 4 | 0.1uF 50V | Capacitor_SMD:C_0603_1608Metric | C14, C24, C25, C28 |
| 4 | 10uF 50V | Capacitor_SMD:C_1206_3216Metric | C6, C15, C26, C27 |
| 4 | 1k/250mW | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R28, R30, R32 |
| 4 | Conn_01x01 | TestPoint:TestPoint_Pad_1.5x1.5mm | J3, J5, J6, J9 |
| 4 | EL817 | Package_DIP:SMDIP-4_W7.62mm | U7, U8, U9, U10 |
| 4 | Input1 | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J11, J12, J13, J15 |
| 3 | 0R | Resistor_SMD:R_0805_2012Metric | R12, R21, R22 |
| 3 | 10uF/25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19, C21, C22 |
| 3 | 22uF/25V | Capacitor_SMD:C_1206_3216Metric | C3, C4, C5 |
| 3 | AO4485 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q2, Q4, Q5 |
| 3 | LESD5D5.0CT1G | Diode_SMD:D_SOD-523 | D6, D7, D8 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric | R3, R24 |
| 2 | 100nF/16V | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C17, C23 |
| 2 | 220 uF 16V | Capacitor_SMD:CP_Elec_8x6.7 | C2, C13 |
| 2 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3, U12 |
| 2 | S9013 J3 | Package_TO_SOT_SMD:SOT-23 | Q6, Q7 |
| 2 | SM4007 | Diode_SMD:D_SOD-123F | D3, D11 |
| 2 | SolderJumper_3_Open | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm_NumberLabels | JP1, JP2 |
| 2 | TS-1187A-B-A-B | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1, SW2 |
| 1 | 0.1uF/50V | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C18 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 10K (NC) | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 10nF 50V | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10uH/6.5A | Inductor_SMD:L_Wuerth_WE-PD2-Typ-XL | L1 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 1N5819HW-7-F | Diode_SMD:D_SOD-123 | D9 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 1uF 25V | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C16 |
| 1 | 1uF/16V | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C20 |
| 1 | 2.74k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q8 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 5V_TP | TestPoint:TestPoint_Pad_1.5x1.5mm | J7 |
| 1 | 7.5A | Fuse:Fuse_Blade_Mini_directSolder | F1 |
| 1 | BZT52B15 | Diode_SMD:D_SOD-123 | D5 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U6 |
| 1 | ESP32-S3-WROOM-1-N16R2 | LED_Wled:XCVR_ESP32-S3-WROOM-1-N16R2 | U5 |
| 1 | INMP441 | LED_Wled:INMP441 | U4 |
| 1 | LED_Channel_1 | Connector_JST:JST_VH_B3P-VH_1x03_P3.96mm_Vertical | J4 |
| 1 | LED_Channel_2 | Connector_JST:JST_VH_B3P-VH_1x03_P3.96mm_Vertical | J1 |
| 1 | LOGO | LED_Wled:easyled | G*** |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | P6SSMAJ33CA | Diode_SMD:D_SMA | D4 |
| 1 | SN74LVC2T45DCUR | Package_SO:VSSOP-8_2.4x2.1mm_P0.5mm | U1 |
| 1 | SS34 | Diode_SMD:D_SMA | D2 |
| 1 | TPS5450DDAR | Package_SO:TI_SO-PowerPAD-8 | U2 |
| 1 | TYPE-C-31-M-12 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J8 |
It measures 40 × 111 mm and has 2 copper layers, 1.6 mm thick.
96 parts, built around the ESP32-S3-WROOM-1-N16R2, TPS5450DDAR, EL817 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the edvard5/wEasyLed_V2 repository on GitHub, at the commit this page was made from: the board is LED_Wled.kicad_pcb and its schematic LED_Wled.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask edvard5 before reusing the design.
igorilla666/water-controller
Scheda di controllo basata sul modulo Waveshare ESP32-S3-ETH, con ingressi sensore, RS-485, pilotaggio rele, buzzer e alimentazione/protezioni dedicate.
JohnDecebal/UNDR
UNDR AUTO is a fully automatic WDT (Weiss Distribution Technique) tool designed for espresso enthusiasts. This open-source DIY project combines 3D printed parts with electronic and mechanical components to create a…
nunosousa/SCART-switcher
An old school SCART switcher. Its main purpose will be to automaticaly detect and switch the video output to the active input video source.
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
Markuselectronics/DIY-USB-C-Reflow-Hotplate
A compact, open-source DIY Reflow Hotplate powered by USB-C PD and STM32. Features a custom aluminum PCB heater, OLED display, and PID temperature control for portable SMD soldering.
CommanderRedYT/ws2812-clock
A simple pcb clock using ws2812 in 7-segment form
barkinvar/sugerCANe
A compact interface for three NPN, PNP or logic sensors on an FRC robot. Each port has a removable 5 V / 12 V power jumper; input type is configured in software.